srv_state has been removed from HTTP state machines, and states
have been split in either TCP states or analyzers. For instance,
the TARPIT state has just become a simple analyzer.
New flags have been added to the struct buffer to compensate this.
The high-level stream processors sometimes need to force a disconnection
without touching a file-descriptor (eg: report an error). But if
they touched BF_SHUTW or BF_SHUTR, the file descriptor would not
be closed. Thus, the two SHUT?_NOW flags have been added so that
an application can request a forced close which the stream interface
will be forced to obey.
During this change, a new BF_HIJACK flag was added. It will
be used for data generation, eg during a stats dump. It
prevents the producer on a buffer from sending data into it.
BF_SHUTR_NOW /* the producer must shut down for reads ASAP */
BF_SHUTW_NOW /* the consumer must shut down for writes ASAP */
BF_HIJACK /* the producer is temporarily replaced */
BF_SHUTW_NOW has precedence over BF_HIJACK. BF_HIJACK has
precedence over BF_MAY_FORWARD (so that it does not need it).
New functions buffer_shutr_now(), buffer_shutw_now(), buffer_abort()
are provided to manipulate BF_SHUT* flags.
A new type "stream_interface" has been added to describe both
sides of a buffer. A stream interface has states and error
reporting. The session now has two stream interfaces (one per
side). Each buffer has stream_interface pointers to both
consumer and producer sides.
The server-side file descriptor has moved to its stream interface,
so that even the buffer has access to it.
process_srv() has been split into three parts :
- tcp_get_connection() obtains a connection to the server
- tcp_connection_failed() tests if a previously attempted
connection has succeeded or not.
- process_srv_data() only manages the data phase, and in
this sense should be roughly equivalent to process_cli.
Little code has been removed, and a lot of old code has been
left in comments for now.
It's a shame not to use buffer->wex for connection timeouts since by
definition it cannot be used till the connection is not established.
Using it instead of ->cex also makes the buffer processing more
symmetric.
It is not always convenient to run checks on req->l in functions to
check if a buffer is empty or full. Now the stream_sock functions
set flags BF_EMPTY and BF_FULL according to the buffer contents. Of
course, functions which touch the buffer contents adjust the flags
too.
BF_SHUTR_PENDING and BF_SHUTW_PENDING were poor ideas because
BF_SHUTR is the pending of BF_SHUTW_DONE and BF_SHUTW is the
pending of BF_SHUTR_DONE. Remove those two useless and confusing
"pending" versions and rename buffer_shut{r,w}_* functions.
It wasn't really wise to separate BF_MAY_CONNECT and BF_MAY_FORWARD,
as it caused trouble in TCP mode because the connection was allowed
but not the forwarding. Remove BF_MAY_CONNECT.
A new member has been added to the struct session. It keeps a trace
of what block of code performs a close or a shutdown on a socket, and
in what sequence. This is extremely convenient for post-mortem analysis
where flag combinations and states seem impossible. A new ABORT_NOW()
macro has also been added to make the code immediately segfault where
called.
The HTTP response code has been moved to a specific function
called "process_response" and the SV_STHEADERS state has been
removed and replaced with the flag AN_RTR_HTTP_HDR.
For the first time, HTTP and TCP are not merged anymore. All request
processing has moved to process_request while the TCP processing of
the frontend remains in process_cli. The code is a lot cleaner,
simpler, smaller (1%) and slightly faster (1% too).
Right now, the HTTP state machine cannot easily command the TCP
state machine, but it does not cause that many difficulties.
The response processing has not yet been extracted, and the unix-stream
state machines have to be broken down that way too.
The CL_STDATA, CL_STSHUTR and CL_STSHUTW states still exist and are
exactly the sames. They will have to be all merged into CL_STDATA
once the work has stabilized. It is also possible that this single
state will disappear in favor of just buffer flags.
The SV_STANALYZE state was installed on the server side but was really
meant to be processed with the rest of the request on the client side.
It suffered from several issues, mostly related to the way timeouts were
handled while waiting for data.
All known issues related to timeouts during a request - and specifically
a request involving body processing - have been raised and fixed. At this
point, the code is a bit dirty but works fine, so next steps might be
cleanups with an ability to come back to the current state in case of
trouble.
This is a first attempt at separating data processing from the
TCP state machine. Those two states have been replaced with flags
in the session indicating what needs to be analyzed. The corresponding
code is still called before and in lieu of TCP states.
Next change should get rid of the specific SV_STANALYZE which is in
fact a client state.
Then next change should consist in making it possible to analyze
TCP contents while being in CL_STDATA (or CL_STSHUT*).
A new buffer flag BF_MAY_FORWARD has been added so that the client
FSM can check whether it is allowed to forward the response to the
client. The client FSM does not have to monitor the server state
anymore.
A new buffer flag BF_MAY_CONNECT has been added so that the server
FSM can check whether it is allowed to establish a connection or
not. That way, the client FSM only has to move this flag and the
server side does not need to monitor client state anymore.
Because I needed it in my situation - here's a quick patch to
allow changing of the "x-forwarded-for" header by using a suboption to
"option forwardfor".
Suboption "header XYZ" will set the header from "x-forwarded-for" to "XYZ".
Default is still "x-forwarded-for" if the header value isn't defined.
Also the suboption 'except a.b.c.d/z' still works on the same line.
So it's now: option forwardfor [except a.b.c.d[/z]] [header XYZ]
All currently known ACL verbs have been assigned a type which makes
it possible to detect inconsistencies, such as response values used
in request rules.
ACL now hold information on the availability of the data they rely
on. They can indicate which parts of the requests/responses they
require, and the rules parser may now report inconsistencies.
As an example, switching rules are now checked for response-specific
ACLs, though those are not still set. A warning is reported in case
of mismatch. ACLs keyword restrictions will now have to be specifically
set wherever a better control is expected.
The line number where an ACL condition is declared has been added to
the conditions in order to be able to report the faulty line number
during post-loading checks.
For protocol analysis, it's not always convenient to have to run through
a fetch then a match against dummy values. It's easier to let the fetch()
function set the result itself. This obviously works only for boolean
values.
Some people need to inspect contents of TCP requests before
deciding to forward a connection or not. A future extension
of this demand might consist in selecting a server farm
depending on the protocol detected in the request.
For this reason, a new state CL_STINSPECT has been added on
the client side. It is immediately entered upon accept() if
the statement "tcp-request inspect-delay <xxx>" is found in
the frontend configuration. Haproxy will then wait up to
this amount of time trying to find a matching ACL, and will
either accept or reject the connection depending on the
"tcp-request content <action> {if|unless}" rules, where
<action> is either "accept" or "reject".
Note that it only waits that long if no definitive verdict
can be found earlier. That generally implies calling a fetch()
function which does not have enough information to decode
some contents, or a match() function which only finds the
beginning of what it's looking for.
It is only at the ACL level that partial data may be processed
as such, because we need to distinguish between MISS and FAIL
*before* applying the term negation.
Thus it is enough to add "| ACL_PARTIAL" to the last argument
when calling acl_exec_cond() to indicate that we expect
ACL_PAT_MISS to be returned if some data is missing (for
fetch() or match()). This is the only case we may return
this value. For this reason, the ACL check in process_cli()
has become a lot simpler.
A new ACL "req_len" of type "int" has been added. Right now
it is already possible to drop requests which talk too early
(eg: for SMTP) or which don't talk at all (eg: HTTP/SSL).
Also, the acl fetch() functions have been extended in order
to permit reporting of missing data in case of fetch failure,
using the ACL_TEST_F_MAY_CHANGE flag.
The default behaviour is unchanged, and if no rule matches,
the request is accepted.
As a side effect, all layer 7 fetching functions have been
cleaned up so that they now check for the validity of the
layer 7 pointer before dereferencing it.
This is the first attempt at moving all internal parts from
using struct timeval to integer ticks. Those provides simpler
and faster code due to simplified operations, and this change
also saved about 64 bytes per session.
A new header file has been added : include/common/ticks.h.
It is possible that some functions should finally not be inlined
because they're used quite a lot (eg: tick_first, tick_add_ifset
and tick_is_expired). More measurements are required in order to
decide whether this is interesting or not.
Some function and variable names are still subject to change for
a better overall logics.
The run queue scheduler now considers task->nice to queue a task and
to pick a task out of the queue. This makes it possible to boost the
access to statistics (both via HTTP and UNIX socket). The UNIX socket
receives twice as much a boost as the HTTP socket because it is more
sensible.
We now insert tasks in a certain sequence in the run queue.
The sorting key currently is the arrival order. It will now
be possible to apply a "nice" value to any task so that it
goes forwards or backwards in the run queue.
The calls to wake_expired_tasks() and maintain_proxies()
have been moved to the main run_poll_loop(), because they
had nothing to do in process_runnable_tasks().
The task_wakeup() function is not inlined anymore, as it was
only used at one place.
The qlist member of the task structure has been removed now.
The run_queue list has been replaced for an integer indicating
the number of tasks in the run queue.
The ultree code has been removed in favor of a simpler and
cleaner ebtree implementation. The eternity queue does not
need to exist anymore, and the pool_tree64 has been removed.
The ebtree node is stored in the task itself. The qlist list
header is still used by the run-queue, but will be able to
disappear once the run-queue uses ebtree too.
If the system date is set backwards while haproxy is running,
some scheduled events are delayed by the amount of time the
clock went backwards. This is particularly problematic on
systems where the date is set at boot, because it seldom
happens that health-checks do not get sent for a few hours.
Before switching to use clock_gettime() on systems which
provide it, we can at least ensure that the clock is not
going backwards and maintain two clocks : the "date" which
represents what the user wants to see (mostly for logs),
and an internal date stored in "now", used for scheduled
events.
The dequeuing logic was completely wrong. First, a task was assigned
to all servers to process the queue, but this task was never scheduled
and was only woken up on session free. Second, there was no reservation
of server entries when a task was assigned a server. This means that
as long as the task was not connected to the server, its presence was
not accounted for. This was causing trouble when detecting whether or
not a server had reached maxconn. Third, during a redispatch, a session
could lose its place at the server's and get blocked because another
session at the same moment would have stolen the entry. Fourth, the
redispatch option did not work when maxqueue was reached for a server,
and it was not possible to do so without indefinitely hanging a session.
The root cause of all those problems was the lack of pre-reservation of
connections at the server's, and the lack of tracking of servers during
a redispatch. Everything relied on combinations of flags which could
appear similarly in quite distinct situations.
This patch is a major rework but there was no other solution, as the
internal logic was deeply flawed. The resulting code is cleaner, more
understandable, uses less magics and is overall more robust.
As an added bonus, "option redispatch" now works when maxqueue has
been reached on a server.
When a server terminates a connection, the next session in its
own queue was immediately processed. Because of this, if all
server queues are always filled, then no new anonymous request
will be processed. Consider oldest request between global and
server queues to choose from which to pick the request.
An improvement over this will consist in adding a configurable
offset when comparing expiration dates, so that cookie-less
requests can get either less or more priority.
A new "redirect" keyword adds the ability to send an HTTP 301/302/303
redirection to either an absolute location or to a prefix followed by
the original URI. The redirection is conditionned by ACL rules, so it
becomes very easy to move parts of a site to another site using this.
This work was almost entirely done at Exceliance by Emeric Brun.
A test-case has been added in the tests/ directory.
- free oldpids
- call free(exp->preg), not only regfree(exp->preg): req_exp, rsp_exp
- build a list of unique uri_auths and eventually free it
- prune_acl_cond/free for switching_rules
- add a callback pointer to free ptr from acl_pattern (used for regexs) and execute it
==1180== malloc/free: in use at exit: 0 bytes in 0 blocks.
==1180== malloc/free: 5,599 allocs, 5,599 frees, 4,220,556 bytes allocated.
==1180== All heap blocks were freed -- no leaks are possible.
New functions implemented:
- deinit_pollers: called at the end of deinit())
- prune_acl: called via list_for_each_entry_safe
Add missing pool_destroy2 calls:
- p->hdr_idx_pool
- pool2_tree64
Implement all task stopping:
- health-check: needs new "struct task" in the struct server
- queue processing: queue_mgt
- appsess_refresh: appsession_refresh
before (idle system):
==6079== LEAK SUMMARY:
==6079== definitely lost: 1,112 bytes in 75 blocks.
==6079== indirectly lost: 53,356 bytes in 2,090 blocks.
==6079== possibly lost: 52 bytes in 1 blocks.
==6079== still reachable: 150,996 bytes in 504 blocks.
==6079== suppressed: 0 bytes in 0 blocks.
after (idle system):
==6945== LEAK SUMMARY:
==6945== definitely lost: 7,644 bytes in 137 blocks.
==6945== indirectly lost: 9,913 bytes in 587 blocks.
==6945== possibly lost: 0 bytes in 0 blocks.
==6945== still reachable: 0 bytes in 0 blocks.
==6945== suppressed: 0 bytes in 0 blocks.
before (running system for ~2m):
==9343== LEAK SUMMARY:
==9343== definitely lost: 1,112 bytes in 75 blocks.
==9343== indirectly lost: 54,199 bytes in 2,122 blocks.
==9343== possibly lost: 52 bytes in 1 blocks.
==9343== still reachable: 151,128 bytes in 509 blocks.
==9343== suppressed: 0 bytes in 0 blocks.
after (running system for ~2m):
==11616== LEAK SUMMARY:
==11616== definitely lost: 7,644 bytes in 137 blocks.
==11616== indirectly lost: 9,981 bytes in 591 blocks.
==11616== possibly lost: 0 bytes in 0 blocks.
==11616== still reachable: 4 bytes in 1 blocks.
==11616== suppressed: 0 bytes in 0 blocks.
Still not perfect but significant improvement.
Add the ability to detect streaming buffers, and set a
flag indicating it. It will later serve us in order to
dynamically resize them, and to prioritize file descriptors
during polls.
This patch allows to specify a domain used when inserting a cookie
providing a session stickiness. Usefull for example with wildcard domains.
The patch adds one new variable to the struct proxy: cookiedomain.
When set the domain is appended to a Set-Cookie header.
Domain name is validated using the new invalid_domainchar() function.
It is basically invalid_char() limited to [A-Za-z0-9_.-]. Yes, the test
is too trivial and does not cover all wrong situations, but the main
purpose is to detect most common mistakes, not intentional abuses.
The underscore ("_") character is not RFC-valid but as it is
often (mis)used so I decided to allow it.
This patch adds two optional arguments "len" and "depth" to
"balance uri". They are used to limit the length in characters
of the analysis, as well as the number of directory components
it applies to.
This patch extends the "url_param" load balancing method by introducing
the "check_post" option. Using this option enables analysis of the beginning
of POST requests to search for the specified URL parameter.
The patch also fixes a few minor typos in comments that were discovered
during code review.
Due to the way the stats socket work, it was not possible to
maintain the information related to the command entered, so
after filling a whole buffer, the request was lost and it was
considered that there was nothing to write anymore.
The major reason was that some flags were passed directly
during the first call to stats_dump_raw() instead of being
stored persistently in the session.
To definitely fix this problem, flags were added to the stats
member of the session structure.
A second problem appeared. When the stats were produced, a first
call to client_retnclose() was performed, then one or multiple
subsequent calls to buffer_write_chunks() were done. But once the
stats buffer was full and a reschedule operated, the buffer was
flushed, the write flag cleared from the buffer and nothing was
done to re-arm it.
For this reason, a check was added in the proto_uxst_stats()
function in order to re-call the client FSM when data were added
by stats_dump_raw(). Finally, the whole unix stats dump FSM was
rewritten to avoid all the magics it depended on. It is now
simpler and looks more like the HTTP one.
The new "leastconn" LB algorithm selects the server which has the
least established or pending connections. The weights are considered,
so that a server with a weight of 20 will get twice as many connections
as the server with a weight of 10.
The algorithm respects the minconn/maxconn settings, as well as the
slowstart since it is a dynamic algorithm. It also correctly supports
backup servers (one and all).
It is generally suited for protocols with long sessions (such as remote
terminals and databases), as it will ensure that upon restart, a server
with no connection will take all new ones until its load is balanced
with others.
A test configuration has been added in order to ease regression testing.
Currently there is a ~16KB limit for a data size passed via unix socket.
It is caused by a trivial bug ttat is going to fixed soon, however
in most cases there is no need to dump a full stats.
This patch makes possible to select a scope of dumped data by extending
current "show stat" to "show stat [<iid> <type> <sid>]":
- iid is a proxy id, -1 to dump all proxies
- type selects type of dumpable objects: 1 for frontend, 2 for backend, 4 for
server, -1 for all types. Values can be ORed, for example:
1+2=3 -> frontend+backend.
1+2+4=7 -> frontend+backend+server.
- sid is a service id, -1 to dump everything from the selected proxy.
To do this I implemented a new session flag (SN_STAT_BOUND), added three
variables in data_ctx.stats (iid, type, sid), modified dumpstats.c and
completely revorked the process_uxst_stats: now it waits for a "\n"
terminated string, splits args and uses them. BTW: It should be quite easy
to add new commands, for example to enable/disable servers, the only problem
I can see is a not very lucky config name (*stats* socket). :|
During the work I also fixed two bug:
- s->flags were not initialized for proto_uxst
- missing comma if throttling not enabled (caused by a stupid change in
"Implement persistent id for proxies and servers")
Other changes:
- No more magic type valuse, use STATS_TYPE_FE/STATS_TYPE_BE/STATS_TYPE_SV
- Don't memset full s->data_ctx (it was clearing s->data_ctx.stats.{iid/type/sid},
instead initialize stats.sv & stats.sv_st (stats.px and stats.px_st were already
initialized)
With all that changes it was extremely easy to write a short perl plugin
for a perl-enabled net-snmp (also included in this patch).
29385 is my PEN (Private Enterprise Number) and I'm willing to donate
the SNMPv2-SMI::enterprises.29385.106.* OIDs for HAProxy if there
is nothing assigned already.
This patch implements ability to set the current state of one server
by tracking another one. It:
- adds two variables: *tracknext, *tracked to struct server
- implements findserver(), similar to findproxy()
- adds "track" keyword accepting both "proxy/server" and "server" (assuming current proxy)
- verifies if both checks and tracking is not enabled at the same time
- changes set_server_down() to notify tracking server
- creates set_server_up(), set_server_disabled(), set_server_enabled() by
moving the code from process_chk() and adding notifications
- changes stats to show a name of tracked server instead of Chk/Dwn/Dwntime(html)
or by adding new variable (csv)
Changes from the previuos version:
- it is possibile to track independently of the declaration order
- one extra comma bug is fixed
- new condition to check if there is no disable-on-404 inconsistency
State and offsets within http_msg were incorrectly set to signed int.
Turning them into unsigned slightly improved performance while reducing
code size.
Now when a server has "redir <prefix>" on its config line, any HEAD or GET
request addressing it will lead to a 302 with Location set to "<prefix>"
immediately followed by the relative URI of the incoming request. This makes
it very easy to send redirect to browsers to check remote static servers, as
well as to provide redirection for remote sites when the local one is down.
The servers now support the "redir" keyword, making it possible to
return a 302 with the specified prefix in front of the request instead
of connecting to them. This is generally useful for multi-site load
balancing but may also serve in order to achieve very high traffic
rate.
The keyword has only been added to the config parser and to structures,
it's not used yet.
This patch adds two new variables: fastinter and downinter.
When server state is:
- non-transitionally UP -> inter (no change)
- transitionally UP (going down), unchecked or transitionally DOWN (going up) -> fastinter
- down -> downinter
It allows to set something like:
server sr6 127.0.51.61:80 cookie s6 check inter 10000 downinter 20000 fastinter 500 fall 3 weight 40
In the above example haproxy uses 10000ms between checks but as soon as
one check fails fastinter (500ms) is used. If server is down
downinter (20000) is used or fastinter (500ms) if one check pass.
Fastinter is also used when haproxy starts.
New "timeout.check" variable was added, if set haproxy uses it as an additional
read timeout, but only after a connection has been already established. I was
thinking about using "timeout.server" here but most people set this
with an addition reserve but still want checks to kick out laggy servers.
Please also note that in most cases check request is much simpler
and faster to handle than normal requests so this timeout should be smaller.
I also changed the timeout used for check connections establishing.
Changes from the previous version:
- use tv_isset() to check if the timeout is set,
- use min("timeout connect", "inter") but only if "timeout check" is set
as this min alone may be to short for full (connect + read) check,
- debug code (fprintf) commented/removed
- documentation
Compile tested only (sorry!) as I'm currently traveling but changes
are rather small and trivial.
Due to the way Linux delivers EPOLLIN and EPOLLHUP, a closed connection
received after some server data sometimes results in truncated responses
if the client disconnects before server starts to respond. The reason
is that the EPOLLHUP flag is processed as an indication of end of
transfer while some data may remain in the system's socket buffers.
This problem could only be triggered with sepoll, although nothing should
prevent it from happening with normal epoll. In fact, the work factoring
performed by sepoll increases the risk that this bug appears.
The fix consists in making FD_POLL_HUP and FD_POLL_ERR sticky and that
they are only checked if FD_POLL_IN is not set, meaning that we have
read all pending data.
That way, the problem is definitely fixed and sepoll still remains about
17% faster than epoll since it can take into account all information
returned by the kernel.
