Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
Initially it looked like this could have been placed into auth.h or
stats.h but it's not the case as it's what makes the link between them
and the HTTP layer. However the file needed to be split in two. Quite
a number of call places were dropped because these were mostly leftovers
from the early days where the stats and cli were packed together.
The files were moved almost as-is, just dropping arg-t and auth-t from
acl-t but keeping arg-t in acl.h. It was useful to revisit the call places
since a handful of files used to continue to include acl.h while they did
not need it at all. Struct stream was only made a forward declaration
since not otherwise needed.
The stktable_types[] array declaration was moved to the main file as
it had nothing to do in the types. A few declarations were reordered
in the types file so that defines were before the structs. Thread-t
was added since there are a few __decl_thread(). The loss of peers.h
revealed that cfgparse-listen needed it.
The cfg_peers external declaration was moved to the main file instead
of the type one. A few types were still missing from the proto, causing
warnings in the functions prototypes (proxy, stick_table).
All includes that were not absolutely necessary were removed because
checks.h happens to very often be part of dependency loops. A warning
was added about this in check-t.h. The fields, enums and structs were
a bit tidied because it's particularly tedious to find anything there.
It would make sense to split this in two or more files (at least
extract tcp-checks).
The file was renamed to the singular because it was one of the rare
exceptions to have an "s" appended to its name compared to the struct
name.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
The file mostly contained struct definitions but there was also a
variable export. Most of the stuff currently lies in checks.h and
should definitely move here!
The STATS_DEFAULT_REALM and STATS_DEFAULT_URI were moved to defaults.h.
It was required to include types/pattern.h and types/sample.h since they
are mentioned in function prototypes.
It would be wise to merge this with uri_auth.h later.
List.h was missing for LIST_ADDQ(). A few unneeded includes of action.h
were removed from certain files.
This one still relies on applet.h and stick-table.h.
And also rename standard.c to tools.c. The original split between
tools.h and standard.h dates from version 1.3-dev and was mostly an
accident. This patch moves the files back to what they were expected
to be, and takes care of not changing anything else. However this
time tools.h was split between functions and types, because it contains
a small number of commonly used macros and structures (e.g. name_desc)
which in turn cause the massive list of includes of tools.h to conflict
with the callers.
They remain the ugliest files of the whole project and definitely need
to be cleaned and split apart. A few types are defined there only for
functions provided there, and some parts are even OS-specific and should
move somewhere else, such as the symbol resolution code.
The protocol.h files are pretty low in the dependency and (sadly) used
by some files from common/. Almost nothing was changed except lifting a
few comments.
The type was moved out as it's used by standard.h for netns_entry.
Instead of just being a forward declaration when not used, it's an
empty struct, which makes gdb happier (the resulting stripped executable
is the same).
Now the file is ready to be stored into its final destination. A few
minor reorderings were performed to keep the file properly organized,
making the various sections more visible (cache & lockless).
In addition and to stay consistent, memory.c was renamed to pool.c.
This one is included almost everywhere and used to rely on a few other
.h that are not needed (unistd, stdlib, standard.h). It could possibly
make sense to split it into multiple parts to distinguish operations
performed on timers and the internal time accounting, but at this point
it does not appear much important.
This splits the hathreads.h file into types+macros and functions. Given
that most users of this file used to include it only to get the definition
of THREAD_LOCAL and MAXTHREADS, the bare minimum was placed into thread-t.h
(i.e. types and macros).
All the thread management was left to haproxy/thread.h. It's worth noting
the drop of the trailing "s" in the name, to remove the permanent confusion
that arises between this one and the system implementation (no "s") and the
makefile's option (no "s").
For consistency, src/hathreads.c was also renamed thread.c.
A number of files were updated to only include thread-t which is the one
they really needed.
Some future improvements are possible like replacing empty inlined
functions with macros for the thread-less case, as building at -O0 disables
inlining and causes these ones to be emitted. But this really is cosmetic.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
When checking the config validity of the http-check rulesets, the test on the
ruleset type is inverted. So a warning about ignored directive is emitted when
the config is valid and omitted when it should be reported.
No backport needed.
In issue #657, Coverity found a bug in the "nameserver" parser for the
resolv.conf when "parse-resolv-conf" is set. What happens is that if an
unparsable address appears on a "nameserver" line, it will destroy the
previously allocated pointer before reporting the warning, then the next
"nameserver" line will dereference it again and wlil cause a crash. If
the faulty nameserver is the last one, it will only be a memory leak.
Let's just make sure we preserve the pointer when handling the error.
The patch also fixes a typo in the warning.
The bug was introduced in 1.9 with commit 44e609bfa ("MINOR: dns:
Implement `parse-resolv-conf` directive") so the fix needs to be backported
up to 1.9 or 2.0.
This fixes OSS Fuzz issue https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=21931.
OSS Fuzz detected a hang on configuration parsing for a 200kB line with a large number of
invalid escape sequences. Most likely due to the amounts of error output generated.
This issue is very minor, because usually generated configurations are to be trusted.
The bug exists since at the very least HAProxy 1.4. The patch may be backported if desired.
During use_backend and use-server post-parsing, if the log-format string used to
specify the backend or the server is just a single string, the log-format string
(a list, internally) is replaced by the string itself. Because the field is an
union, the list is not emptied according to the rules of art. The element, when
released, is not removed from the list. There is no bug, but it is clearly not
obvious and error prone.
This patch should fix#544. The fix for the use_backend post-parsing may be
backported to all stable releases. use-server is static in 2.1 and prior.
HTTP health-checks are now internally based on tcp-checks. Of course all the
configuration parsing of the "http-check" keyword and the httpchk option has
been rewritten. But the main changes is that now, as for tcp-check ruleset, it
is possible to perform several send/expect sequences into the same
health-checks. Thus the connect rule is now also available from HTTP checks, jst
like set-var, unset-var and comment rules.
Because the request defined by the "option httpchk" line is used for the first
request only, it is now possible to set the method, the uri and the version on a
"http-check send" line.
All tcp-check rules are now stored in the globla shared list. The ones created
to parse a specific protocol, for instance redis, are already stored in this
list. Now pure tcp-check rules are also stored in it. The ruleset name is
created using the proxy name and its config file and line. tcp-check rules
declared in a defaults section are also stored this way using "defaults" as
proxy name.
For now, all tcp-check ruleset are stored in a list. But it could be a bit slow
to looks for a specific ruleset with a huge number of backends. So, it could be
a good idea to use a tree instead.
A shared tcp-check ruleset is now created to support ssl-hello check. This way
no extra memory is used if several backends use a ssl-hello check.
The following sequence is used :
tcp-check send-binary SSLV3_CLIENT_HELLO log-format
tcp-check expect rbinary "^1[56]" min-recv 5 \
error-status "L6RSP" tout-status "L6TOUT"
SSLV3_CLIENT_HELLO is a log-format hexa string representing a SSLv3 CLIENT HELLO
packet. It is the same than the one used by the old ssl-hello except the sample
expression "%[date(),htonl,hex]" is used to set the date field.
A global list to tcp-check ruleset can now be used to share common rulesets with
all backends without any duplication. It is mandatory to convert all specific
protocol checks (redis, pgsql...) to tcp-check healthchecks.
To do so, a flag is now attached to each tcp-check ruleset to know if it is a
shared ruleset or not. tcp-check rules defined in a backend are still directly
attached to the proxy and not shared. In addition a second flag is used to know
if the ruleset is inherited from the defaults section.
To allow reusing these blocks without consuming more memory, their list
should be static and share-able accross uses. The head of the list will
be shared as well.
It is thus necessary to extract the head of the rule list from the proxy
itself. Transform it into a pointer instead, that can be easily set to
an external dynamically allocated head.
The options and directives related to the configuration of checks in a backend
may be defined after the servers declarations. So, initialization of the check
of each server must not be performed during configuration parsing, because some
info may be missing. Instead, it must be done during the configuration validity
check.
Thus, callback functions are registered to be called for each server after the
config validity check, one for the server check and another one for the server
agent-check. In addition deinit callback functions are also registered to
release these checks.
This patch should be backported as far as 1.7. But per-server post_check
callback functions are only supported since the 2.1. And the initcall mechanism
does not exist before the 1.9. Finally, in 1.7, the code is totally
different. So the backport will be harder on older versions.
This options is used to force a non-SSL connection to check a SSL server or to
invert a check-ssl option inherited from the default section. The use_ssl field
in the check structure is used to know if a SSL connection must be used
(use_ssl=1) or not (use_ssl=0). The server configuration is used by default.
The problem is that we cannot distinguish the default case (no specific SSL
check option) and the case of an explicit non-SSL check. In both, use_ssl is set
to 0. So the server configuration is always used. For a SSL server, when
no-check-ssl option is set, the check is still performed using a SSL
configuration.
To fix the bug, instead of a boolean value (0=TCP, 1=SSL), we use a ternary value :
* 0 = use server config
* 1 = force SSL
* -1 = force non-SSL
The same is done for the server parameter. It is not really necessary for
now. But it is a good way to know is the server no-ssl option is set.
In addition, the PR_O_TCPCHK_SSL proxy option is no longer used to set use_ssl
to 1 for a check. Instead the flag is directly tested to prepare or destroy the
server SSL context.
This patch should be backported as far as 1.8.
Before supporting "server" line in "peers" section, such sections without
any local peer were removed from the configuration to get it validated.
This patch fixes the issue where a "server" line without address and port which
is a remote peer without address and port makes the configuration parsing fail.
When encoutering such cases we now ignore such lines remove them from the
configuration.
Thank you to Jrme Magnin for having reported this bug.
Must be backported to 2.1 and 2.0.
With server-template was introduced the possibility to scale the
number of servers in a backend without needing a configuration change
and associated reload. On the other hand it became impractical to
write use-server rules for these servers as they would only accept
existing server labels as argument. This patch allows the use of
log-format notation to describe targets of a use-server rules, such
as in the example below:
listen test
bind *:1234
use-server %[hdr(srv)] if { hdr(srv) -m found }
use-server s1 if { path / }
server s1 127.0.0.1:18080
server s2 127.0.0.1:18081
If a use-server rule is applied because it was conditionned by an
ACL returning true, but the target of the use-server rule cannot be
resolved, no other use-server rule is evaluated and we fall back to
load balancing.
This feature was requested on the ML, and bumped with issue #563.
When a "peers" section has not any local peer, it is removed of the list
of "peers" sections by check_config_validity(). But a stick-table which
refers to a "peers" section stores a pointer to this peers section.
These pointer must be reset to NULL value for each stick-table refering to
such a "peers" section to prevent stktable_init() to start the peers frontend
attached to the peers section dereferencing the invalid pointer.
Furthemore this patch stops the peers frontend as this is done for other
configurations invalidated by check_config_validity().
Thank you to Olivier D for having reported this issue with such a
simple configuration file which made haproxy crash when started with
-c option for configuration file validation.
defaults
mode http
peers mypeers
peer toto 127.0.0.1:1024
backend test
stick-table type ip size 10k expire 1h store http_req_rate(1h) peers mypeers
Must be backported to 2.1 and 2.0.
Fix an infinite loop which was added in an attempt to fix#558.
If the peers_fe is NULL, it will loop forever.
Must be backported with a2cfd7e as far as 1.8.
Tim reported that in master-worker mode, if a stick-table is declared
but not used in the configuration, its associated peers listener won't
bind.
This problem is due the fact that the master-worker and the daemon mode,
depend on the bind_proc field of the peers proxy to disable the listener.
Unfortunately the bind_proc is left to 0 if no stick-table were used in
the configuration, stopping the listener on all processes.
This fixes sets the bind_proc to the first process if it wasn't
initialized.
Should fix bug #558. Should be backported as far as 1.8.
Revamp the server connection lists. We know have 3 lists :
- idle_conns, which contains idling connections
- safe_conns, which contains idling connections that are safe to use even
for the first request
- available_conns, which contains connections that are not idling, but can
still accept new streams (those are HTTP/2 or fastcgi, and are always
considered safe).
Remove the list of private connections from server, it has been largely
unused, we only inserted connections in it, but we would never actually
use it.
The isalnum(), isalpha(), isdigit() etc functions from ctype.h are
supposed to take an int in argument which must either reflect an
unsigned char or EOF. In practice on some platforms they're implemented
as macros referencing an array, and when passed a char, they either cause
a warning "array subscript has type 'char'" when lucky, or cause random
segfaults when unlucky. It's quite unconvenient by the way since none of
them may return true for negative values. The recent introduction of
cygwin to the list of regularly tested build platforms revealed a lot
of breakage there due to the same issues again.
So this patch addresses the problem all over the code at once. It adds
unsigned char casts to every valid use case, and also drops the unneeded
double cast to int that was sometimes added on top of it.
It may be backported by dropping irrelevant changes if that helps better
support uncommon platforms. It's unlikely to fix bugs on platforms which
would already not emit any warning though.
`curr_idle_thr` is of type `unsigned int`, not `int`. Fix this issue by
taking the size of the dereferenced `curr_idle_thr` array.
This issue was introduced when adding the `curr_idle_thr` struct member
in commit f131481a0a. This commit is first
tagged in 2.0-dev1 and marked for backport to 1.9.
This patch introduces the 'http-after-response' rules. These rules are evaluated
at the end of the response analysis, just before the data forwarding, on ALL
HTTP responses, the server ones but also all responses generated by
HAProxy. Thanks to this ruleset, it is now possible for instance to add some
headers to the responses generated by the stats applet. Following actions are
supported :
* allow
* add-header
* del-header
* replace-header
* replace-value
* set-header
* set-status
* set-var
* strict-mode
* unset-var
A first patch was made during 2.0-dev to silence a bogus warning emitted
by gcc : dd1c8f1f72 ("MINOR: cfgparse: Add a cast to make gcc happier."),
but it happens it was not sufficient as the warning re-appeared on 32-bit
machines under gcc-8 and gcc-9 :
src/cfgparse.c: In function 'check_config_validity':
src/cfgparse.c:3642:33: warning: argument 1 range [2147483648, 4294967295] exceeds maximum object size 2147483647 [-Walloc-size-larger-than=]
newsrv->idle_orphan_conns = calloc((unsigned int)global.nbthread, sizeof(*newsrv->idle_orphan_conns));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This warning doesn't trigger in other locations, and it immediately
vanishes if the previous or subsequent loops do not depend on
global.nbthread anymore, or if the field ordering of the struct server
changes! As discussed in the thread at:
https://www.mail-archive.com/haproxy@formilux.org/msg36107.html
playing with -Walloc-size-larger-than has no effect. And a minimal
reproducer could be isolated, indicating it's pointless to circle around
this one. Let's just cast nbthread to ushort so that gcc cannot make
this wrong detection. It's unlikely we'll use more than 65535 threads in
the near future anyway.
This may be backported to older releases if they are also affected, at
least to ease the job of distro maintainers.
Thanks to Ilya for testing.
Since commit 1b8e68e89a ("MEDIUM: stick-table: Stop handling stick-tables
as proxies."), a rule referencing the current proxy with no table leads
to the following error :
[ALERT] 023/071924 (16479) : Proxy 'px': unable to find stick-table '(null)'.
[ALERT] 023/071914 (16479) : Fatal errors found in configuration.
for a config like this one:
backend px
stick on src
This patch fixes it and should be backported as far as 2.0.
Now, this action is use its own dedicated function and is no longer handled "in
place" during the TCP rules evaluation. Thus the action name ACT_TCP_CAPTURE is
removed. The action type is set to ACT_CUSTOM and a check function is used to
know if the rule depends on request contents while there is no inspect-delay.
Now, these actions use their own dedicated function and are no longer handled
"in place" during the TCP/HTTP rules evaluation. Thus the action names
ACT_ACTION_TRK_SC0 and ACT_ACTION_TRK_SCMAX are removed. The action type is now
the tracking index. Thus the function trk_idx() is no longer needed.
Some concerns are regularly raised about the risk to inherit some Lua
files which make use of a fork (e.g. via os.execute()) as well as
whether or not some of bugs we fix might or not be exploitable to run
some code. Given that haproxy is event-driven, any foreground activity
completely stops processing and is easy to detect, but background
activity is a different story. A Lua script could very well discretely
fork a sub-process connecting to a remote location and taking commands,
and some injected code could also try to hide its activity by creating
a process or a thread without blocking the rest of the processing. While
such activities should be extremely limited when run in an empty chroot
without any permission, it would be better to get a higher assurance
they cannot happen.
This patch introduces something very simple: it limits the number of
processes and threads to zero in the workers after the last thread was
created. By doing so, it effectively instructs the system to fail on
any fork() or clone() syscall. Thus any undesired activity has to happen
in the foreground and is way easier to detect.
This will obviously break external checks (whose concept is already
totally insecure), and for this reason a new option
"insecure-fork-wanted" was added to disable this protection, and it
is suggested in the fork() error report from the checks. It is
obviously recommended not to use it and to reconsider the reasons
leading to it being enabled in the first place.
If for any reason we fail to disable forks, we still start because it
could be imaginable that some operating systems refuse to set this
limit to zero, but in this case we emit a warning, that may or may not
be reported since we're after the fork point. Ideally over the long
term it should be conditionned by strict-limits and cause a hard fail.
This patch is easy to review: let's call parse_logsrv() function to parse
"log" directive as this is already for other sections for proxies.
This enable us to log incoming TCP connections for the listeners for "peers"
sections.
Update the documentation for "peers" section.
this patch introduces a strict-limits parameter which enforces the
setrlimit setting instead of a warning. This option can be forcingly
disable with the "no" keyword.
The general aim of this patch is to avoid bad surprises on a production
environment where you change the maxconn for example, a new fd limit is
calculated, but cannot be set because of sysfs setting. In that case you
might want to have an explicit failure to be aware of it before seeing
your traffic going down. During a global rollout it is also useful to
explictly fail as most progressive rollout would simply check the
general health check of the process.
As discussed, plan to use the strict by default mode starting from v2.3.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
in global config parsing, we currently expect to have a possible no
keyword (KWN_NO), but we never allow it in config parsing.
another patch could have been to simply remove the code handling a
possible KWN_NO.
take this opportunity to update documentation of set-dumpable.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
The idle cleanup tasks' masks are wrong for threads 32 to 64, which
causes the wrong thread to wake up and clean the connections that it
does not own, with a risk of crash or infinite loop depending on
concurrent accesses. For thread 32, any thread between 32 and 64 will
be woken up, but for threads 33 to 64, in fact threads 1 to 32 will
run the task instead.
This issue only affects deployments enabling more than 32 threads. While
is it not common in 1.9 where this has to be explicit, and can easily be
dealt with by lowering the number of threads, it can be more common in
2.0 since by default the thread count is determined based on the number
of available processors, hence the MAJOR tag which is mostly relevant
to 2.x.
The problem was first introduced into 1.9-dev9 by commit 0c18a6fe3
("MEDIUM: servers: Add a way to keep idle connections alive.") and was
later moved to cfgparse.c by commit 980855bd9 ("BUG/MEDIUM: server:
initialize the orphaned conns lists and tasks at the end").
This patch needs to be backported as far as 1.9, with care as 1.9 is
slightly different there (uses idle_task[] instead of idle_conn_cleanup[]
like in 2.x).
This flag was added in 1.4-rc1 by commit 329f74d463 ("[BUG] uri_auth: do
not attemp to convert uri_auth -> http-request more than once") to
address the case where two proxies inherit the stats settings from
the defaults instance, and the first one compiles the expression while
the second one uses it. In this case since they use the exact same
uri_auth pointer, only the first one should compile and the second one
must not fail the check. This was addressed by adding an ST_CONVDONE
flag indicating that the expression conversion was completed and didn't
need to be done again. But this is a hack and it becomes cumbersome in
the middle of the other flags which are all relevant to the stats
applet. Let's instead fix it by checking if we're dealing with an
alias of the defaults instance and refrain from compiling this twice.
This allows us to remove the ST_CONVDONE flag.
A typical config requiring this check is :
defaults
mode http
stats auth foo:bar
listen l1
bind :8080
listen l2
bind :8181
Without this (or previous) check it would cmoplain when checking l2's
validity since the rule was already built.
When we configure a "peers" section without local peer, this makes haproxy
old process crash on reload.
Such a configuration file allows to reproduce this issue:
global
stats socket /tmp/sock1 mode 666 level admin
stats timeout 10s
peers peers
peer localhost 127.0.0.1:1024
This bug was introduced by this commit:
"MINOR: cfgparse: Make "peer" lines be parsed as "server" lines"
This commit introduced a new condition to detect a "peers" section without
local peer. This is a "peers" section with a frontend struct which has no ->id
initialized member. Such a "peers" section must be removed.
This patch adds this new condition to remove such peers sections without local
peer as this was always done before.
Must be backported to 2.0.
Instead of using the same type for regular linked lists and "autolocked"
linked lists, use a separate type, "struct mt_list", for the autolocked one,
and introduce a set of macros, similar to the LIST_* macros, with the
MT_ prefix.
When we use the same entry for both regular list and autolocked list, as
is done for the "list" field in struct connection, we know have to explicitely
cast it to struct mt_list when using MT_ macros.
This bug came with 015e4d7 commit: "MINOR: stick-tables: Add peers process
binding computing" where the "stick" rules cases were missing when computing
the peer local listener process binding. At parsing time we store in the
stick-table struct ->proxies_list the proxies which refer to this stick-table.
The process binding is computed after having parsed the entire configuration file
with this simple loop in cfgparse.c:
/* compute the required process bindings for the peers from <stktables_list>
* for all the stick-tables, the ones coming with "peers" sections included.
*/
for (t = stktables_list; t; t = t->next) {
struct proxy *p;
for (p = t->proxies_list; p; p = p->next_stkt_ref) {
if (t->peers.p && t->peers.p->peers_fe) {
t->peers.p->peers_fe->bind_proc |= p->bind_proc;
}
}
}
Note that if this process binding is not correctly initialized, the child forked
by the master-worker stops the peer local listener. Should be also the case
when daemonizing haproxy.
Must be backported to 2.0.
The option 'http-tunnel' is deprecated and it was only used in the legacy HTTP
mode. So this option is now totally ignored and a warning is emitted during
HAProxy startup if it is found in a configuration file.
The old module proto_http does not exist anymore. All code dedicated to the HTTP
analysis is now grouped in the file proto_htx.c. So, to finish the polishing
after removing the legacy HTTP code, proto_htx.{c,h} files have been moved in
http_ana.{c,h} files.
In addition, all HTX analyzers and related functions prefixed with "htx_" have
been renamed to start with "http_" instead.
First of all, all legacy HTTP analyzers and all functions exclusively used by
them were removed. So the most of the functions in proto_http.{c,h} were
removed. Only functions to deal with the HTTP transaction have been kept. Then,
http_msg and hdr_idx modules were entirely removed. And finally the structure
http_msg was lightened of all its useless information about the legacy HTTP. The
structure hdr_ctx was also removed because unused now, just like unused states
in the enum h1_state. Note that the memory pool "hdr_idx" was removed and
"http_txn" is now smaller.
Since the legacy HTTP mode is disabled and no multiplexer relies on it anymore,
there is no reason to have 2 multiplexer protocols for the HTTP. So the protocol
PROTO_MODE_HTX was removed and all HTTP multiplexers use now PROTO_MODE_HTTP.
As reported in GH issue #109 and in discourse issue
https://discourse.haproxy.org/t/haproxy-returns-408-or-504-error-when-timeout-client-value-is-every-25d
the time parser doesn't error on overflows nor underflows. This is a
recurring problem which additionally has the bad taste of taking a long
time before hitting the user.
This patch makes parse_time_err() return special error codes for overflows
and underflows, and adds the control in the call places to report suitable
errors depending on the requested unit. In practice, underflows are almost
never returned as the parsing function takes care of rounding values up,
so this might possibly happen on 64-bit overflows returning exactly zero
after rounding though. It is not really possible to cut the patch into
pieces as it changes the function's API, hence all callers.
Tests were run on about every relevant part (cookie maxlife/maxidle,
server inter, stats timeout, timeout*, cli's set timeout command,
tcp-request/response inspect-delay).
Commit fb55365f9 ("MINOR: server: increase the default pool-purge-delay
to 5 seconds") did this but the setting placed in new_server() was
overwritten by srv_settings_cpy() from the default-server values preset
in init_default_instance(). Now let's put it at the right place.
Make usage of the APIs implemented for dictionaries (dict.c) and their LRU caches (struct dcache)
so that to send/receive server names used for the server by name stickiness. These
names are sent over the network as follows:
- in every case we send the encode length of the data (STD_T_DICT), then
- if the server names is not present in the cache used upon transmission (struct dcache_tx)
we cache it and we the ID of this TX cache entry followed the encode length of the
server name, and finally the sever name itseft (non NULL terminated string).
- if the server name is present, we repead these operations but we only send the TX cache
entry ID.
Upon receipt, the couple of (cache IDs, server name) are stored the LRU cache used
only upon receipt (struct dcache_rx). As the peers protocol is symetrical, the fact
that the server name is present in the received data (resp. or not) denotes if
the entry is absent (resp. or not).
When parsing sticking rules, with this patch we reserve some room for the new
"server_name" stick-table data type, as this is already done for "server_id",
setting the offset and used space (in bytes) in the stick-table entry thanks
to stkable_alloc_data_type().
We've been emitting warnings for over 5 years (since 1.5-dev22) about
configs accidently carrying multiple servers with the same name in the
same backend, and this starts to cause some real trouble in dynamic
environments since it's still very difficult to accurately process
a state-file and we still can't transport a server's name over the
peers protocol because of this.
It's about time to force users to fix their configs if they still
hadn't given that there is zero technical justification for doing this,
beyond the "yyp" (or copy-paste accident) when editing the config.
The message remains as clear as before, indicating the file and lines
of the conflict so that the user can easily fix it.
We still have quite a number of build macros which are mapped 1:1 to a
USE_something setting in the makefile but which have a different name.
This patch cleans this up by renaming them to use the USE_something
one, allowing to clean up the makefile and make it more obvious when
reading the code what build option needs to be added.
The following renames were done :
ENABLE_POLL -> USE_POLL
ENABLE_EPOLL -> USE_EPOLL
ENABLE_KQUEUE -> USE_KQUEUE
ENABLE_EVPORTS -> USE_EVPORTS
TPROXY -> USE_TPROXY
NETFILTER -> USE_NETFILTER
NEED_CRYPT_H -> USE_CRYPT_H
CONFIG_HAP_CRYPT -> USE_LIBCRYPT
CONFIG_HAP_NS -> DUSE_NS
CONFIG_HAP_LINUX_SPLICE -> USE_LINUX_SPLICE
CONFIG_HAP_LINUX_TPROXY -> USE_LINUX_TPROXY
CONFIG_HAP_LINUX_VSYSCALL -> USE_LINUX_VSYSCALL
This directive never appeared in a stable release and instead was
introduced and deprecated within 1.8-dev. While it technically could
be outright removed we detect it and error out for good measure.
cfg_parse_peers previously leaked the contents of the `kws` string,
as it was unconditionally filled using bind_dump_kws, but only used
(and freed) within the error case.
Move the dumping into the error case to:
1. Ensure that the registered keywords are actually printed as least once.
2. The contents of kws are not leaked.
This move allows to narrow the scope of `kws`, so this is done as well.
This bug was found using valgrind:
==28217== 590 bytes in 1 blocks are definitely lost in loss record 51 of 71
==28217== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==28217== by 0x4AD4C7: indent_msg (standard.c:3676)
==28217== by 0x47E962: cfg_parse_peers (cfgparse.c:700)
==28217== by 0x480273: readcfgfile (cfgparse.c:2147)
==28217== by 0x479D51: init (haproxy.c:1585)
==28217== by 0x404A02: main (haproxy.c:2585)
with this super simple configuration:
peers peers
bind :8081
server A
This bug exists since the introduction of cfg_parse_peers in commit
355b2033ec (which was introduced for HAProxy
2.0, but marked as backportable). It should be backported to all branches
containing that commit.
In commit 1b8e68e ("MEDIUM: stick-table: Stop handling stick-tables as
proxies."), the ->table member of proxy struct was replaced by a pointer
that is not always checked and in some situations can cause a segfault,
eg. during reload or while using "show table" on CLI socket.
No backport is needed.
This commit "MINOR: stick-table: Add prefixes to stick-table names"
prepended the "peers" section name to stick-table names declared in such "peers"
sections followed by a '/' character. This is not this name which must be sent
over the network to avoid collisions with stick-table name declared as backends.
As the '/' character is forbidden as first character of a backend name, we prefix
the stick-table names declared in peers sections only with a '/' character.
With such declarations:
peers mypeers
table t1
backend t1
stick-table ... peers mypeers
at peer protocol level, "t1" declared as stick-table in "mypeers" section is different
of "t1" stick-table declared as backend.
In src/peers.c, only two modifications were required: use ->nid stktable struct
member in place of ->id in peer_prepare_switchmsg() to prepare the stick-table
definition messages. Same thing in peer_treat_definemsg() to treat a stick-table
definition messages.
With this patch we add a prefix to stick-table names declared in "peers" sections
concatenating the "peers" section name followed by a '/' character with
the stick-table name. Consequently, "peers" sections have their own
namespace for their stick-tables. Obviously, these stick-table names are not the
ones which should be sent over the network. So these configurations must be
compatible and should make A and B peers communicate with peers protocol:
# haproxy A config, old way stick-table declerations
peers mypeers
peer A ...
peer B ...
backend t1
stick-table type string size 10m store gpc0 peers mypeers
# haproxy B config, new way stick-table declerations
peers mypeers
peer A ...
peer B ...
table t1 type string size store gpc0 10m
This "network" name is stored in ->nid new field of stktable struct. The "local"
stktable-name is still stored in ->id.
Add a list of proxies for all the stick-tables (->proxies_list struct stktable
member) so that to be able to compute the process bindings of the peers after having
parsed the configuration file.
The proxies are added to the stick-tables they reference when parsing
stick-tables lines in proxy sections, when checking the actions in
check_trk_action() and when resolving samples args for stick-tables
without checking is they are duplicates. We check only there is no loop.
Then, after having parsed everything, we add the proxy bindings to the
peers frontend bindings with stick-tables they reference.
This patch adds the support for the "table" line parsing in "peers" sections
to declare stick-table in such sections. This also prevents the user from having
to declare dummy backends sections with a unique stick-table inside.
Even if still supported, this usage will become deprecated.
To do so, the ->table member of proxy struct which is a stktable struct is replaced
by a pointer to a stktable struct allocated at parsing time in src/cfgparse-listen.c
for the dummy stick-table backends and in src/cfgparse.c for "peers" sections.
This has an impact on the code for stick-table sample converters and on the stickiness
rules parsers which first store the name of the dummy before resolving the rules.
This patch replaces proxy_tbl_by_name() calls by stktable_find_by_name() calls
to lookup for stick-tables stored in "stktable_by_name" ebtree at parsing time.
There is only one remaining place where proxy_tbl_by_name() is used: src/hlua.c.
At several places in the code we relied on the fact that ->size member of stick-table
was equal to zero to consider the stick-table was present by not configured,
this do not make sense anymore as ->table member of struct proxyis fow now on a pointer.
These tests are replaced by a test on ->table value itself.
In "peers" section we do not have to temporary store the name of the section the
stick-table are attached to because this name is obviously already known just after
having entered this "peers" section.
About the CLI stick-table I/O handler, the pointer to proxy struct is replaced by
a pointer to a stktable struct.
This implements support for the new API which relies on a call to
setsockopt().
On systems that support it (currently, only Linux >= 4.11), this enables
using TCP fast open when connecting to server.
Please note that you should use the retry-on "conn-failure", "empty-response"
and "response-timeout" keywords, or the request won't be able to be retried
on failure.
Co-authored-by: Olivier Houchard <ohouchard@haproxy.com>
When running in HTX mode, if we sent the request, but failed to get the
answer, either because the server just closed its socket, we hit a server
timeout, or we get a 404, 408, 425, 500, 501, 502, 503 or 504 error,
attempt to retry the request, exactly as if we just failed to connect to
the server.
To do so, add a new backend keyword, "retry-on".
It accepts a list of keywords, which can be "none" (never retry),
"conn-failure" (we failed to connect, or to do the SSL handshake),
"empty-response" (the server closed the connection without answering),
"response-timeout" (we timed out while waiting for the server response),
or "404", "408", "425", "500", "501", "502", "503" and "504".
The default is "conn-failure".
This patch only removes a useless calculation on listener->maxaccept when nbproc
is set to 1. Indeed, the following formula has no effet in such case:
listener->maxaccept = (listener->maxaccept + nbproc - 1) / nbproc;
This patch may be backported as far as 1.5.
When tests are performed on the HTX mode during HAProxy startup, only HTTP
proxies are considered. It is important because, since the commit 1d2b586cd
("MAJOR: htx: Enable the HTX mode by default for all proxies"), the HTX is
enabled on all proxies by default. But for TCP proxies, it is "deactivated".
This patch must be backported to 1.9.
The option http-tunnel disables any HTTP processing past the first
transaction. In HTX, it works for full h1 transactions. As for the legacy HTTP,
it is a workaround, but it works. But it is impossible to make it works with an
h2 connection. In such case, it has no effect, the stream is closed at the end
of the transaction. So to avoid any inconsistancies between h1 and h2
connections, this option is now always ignored when the HTX is enabled. It is
also a good opportinity to deprecate an old and ugly option. A warning is
emitted during HAProxy startup to encourage users to remove this option.
Note that in legacy HTTP, this option only works with full h1 transactions
too. If an h2 connection is established on a frontend with this option enabled,
it will have no effect at all. But we keep it for the legacy HTTP for
compatibility purpose. It will be removed with the legacy HTTP.
So to be short, if you have to really (REALLY) use it, it will only work for
legacy HTTP frontends with H1 clients.
The documentation has been updated accordingly.
This patch must be backported to 1.9. It is not strictly speaking required but
it will ease futur backports.
Now that the P2C algorithm for the accept queue is removed, we don't
need to map a number to a thread bit anymore, so let's remove all
these fields which are taking quite some space for no reason.
Historically the default frontend's maxconn used to be quite low (2000),
which was sufficient two decades ago but often proved to be a problem
when users had purposely set the global maxconn value but forgot to set
the frontend's.
There is no point in keeping this arbitrary limit for frontends : when
the global maxconn is lower, it's already too high and when the global
maxconn is much higher, it becomes a limiting factor which causes trouble
in production.
This commit allows the value to be set to zero, which becomes the new
default value, to mean it's not directly limited, or in fact it's set
to the global maxconn. Since this operation used to be performed before
computing a possibly automatic global maxconn based on memory limits,
the calculation of the maxconn value and its propagation to the backends'
fullconn has now moved to a dedicated function, proxy_adjust_all_maxconn(),
which is called once the global maxconn is stabilized.
This comes with two benefits :
1) a configuration missing "maxconn" in the defaults section will not
limit itself to a magically hardcoded value but will scale up to the
global maxconn ;
2) when the global maxconn is not set and memory limits are used instead,
the frontends' maxconn automatically adapts, and the backends' fullconn
as well.
It's pointless to always set and maintain l->maxconn because the accept
loop already enforces the frontend's limit anyway. Thus let's stop setting
this value by default and keep it to zero meaning "no limit". This way the
frontend's maxconn will be used by default. Of course if a value is set,
it will be enforced.
In an attempt to try to provide automatic maxconn settings, we need to
decorrelate a listner's backlog and maxconn so that these values can be
independent. This introduces a listener_backlog() function which retrieves
the backlog value from the listener's backlog, the frontend's, the
listener's maxconn, the frontend's or falls back to 1024. This
corresponds to what was done in cfgparse.c to force a value there except
the last fallback which was not set since the frontend's maxconn is always
known.
global.maxsock used to be augmented by the frontend's maxconn value
for each frontend listener, which is absurd when there are many
listeners in a frontend because the frontend's maxconn fixes an
upper limit to how many connections will be accepted on all of its
listeners anyway. What is needed instead is to add one to count the
listening socket.
In addition, the CLI's and peers' value was incremented twice, the
first time when creating the listener and the second time in the
main init code.
Let's now make sure we only increment global.maxsock by the required
amount of sockets. This means not adding maxconn for each listener,
and relying on the global values when they are correct.
Threads have long matured by now, still for most users their usage is
not trivial. It's about time to enable them by default on platforms
where we know the number of CPUs bound. This patch does this, it counts
the number of CPUs the process is bound to upon startup, and enables as
many threads by default. Of course, "nbthread" still overrides this, but
if it's not set the default behaviour is to start one thread per CPU.
The default number of threads is reported in "haproxy -vv". Simply using
"taskset -c" is now enough to adjust this number of threads so that there
is no more need for playing with cpu-map. And thanks to the previous
patches on the listener, the vast majority of configurations will not
need to duplicate "bind" lines with the "process x/y" statement anymore
either, so a simple config will automatically adapt to the number of
processors available.
In order to quickly pick a thread ID when accepting a connection, we'll
need to know certain pre-computed values derived from the thread mask,
which are counts of bits per position multiples of 1, 2, 4, 8, 16 and
32. In practice it is sufficient to compute only the 4 first ones and
store them in the bind_conf. We update the count every time the
bind_thread value is adjusted.
The fields in the bind_conf struct have been moved around a little bit
to make it easier to group all thread bit values into the same cache
line.
The function used to return a thread number is bind_map_thread_id(),
and it maps a number between 0 and 31/63 to a thread ID between 0 and
31/63, starting from the left.
Now that nbproc and nbthread are exclusive, we can still provide more
detailed explanations about what we've found in the config when a bind
line appears on multiple threads and processes at the same time, then
ignore the setting.
This patch reduces the listener's thread mask to a single mask instead
of an array of masks per process. Now we have only one thread mask and
one process mask per bind-conf. This removes ~504 bytes of RAM per
bind-conf and will simplify handling of thread masks.
If a "bind" line only refers to process numbers not found by its parent
frontend or not covered by the global nbproc directive, or to a thread
not covered by the global nbthread directive, a warning is emitted saying
what will be used instead.
When 1.8 was released, we wanted to support both nbthread and nbproc to
observe how things would go. Since then it appeared obvious that the two
are never used together because of the pain to configure affinity in this
case, and instead of bringing benefits, it brings the limitations of both
models, and causes multiple threads to compete for the same CPU. In
addition, it costs a lot to support both in parallel, so let's get rid
of this once for all.
When calling calloc(), cast global.nbthread to unsigned int, so that gcc
doesn't freak out, as it has no way of knowing global.nbthread can't be
negative.
Instead of having one task per thread and per server that does clean the
idling connections, have only one global task for every servers.
That tasks parses all the servers that currently have idling connections,
and remove half of them, to put them in a per-thread list of connections
to kill. For each thread that does have connections to kill, wake a task
to do so, so that the cleaning will be done in the context of said thread.
Add a per-thread counter of idling connections, and use it to determine
how many connections we should kill after the timeout, instead of using
the global counter, or we're likely to just kill most of the connections.
This should be backported to 1.9.
Initialize ->srv peer field for all the peers, the local peer included.
Indeed, a haproxy process needs to connect to the local peer of a remote
process. Furthermore, when a "peer" or "server" line is parsed by parse_server()
the address must be copied to ->addr field of the peer object only if this address
has been also parsed by parse_server(). This is not the case if this address belongs
to the local peer and is provided on a "server" line.
After having parsed the "peer" or "server" lines of a peer
sections, the ->srv part of all the peer must be initialized for SSL, if
enabled. Same thing for the binding part.
Revert 1417f0b commit which is no more required.
No backport is needed, this is purely 2.0.
Now, in the function parse_process_number(), when a process number or a set of
processes is parsed, an error is triggered if an invalid character is found. It
means following syntaxes are not forbidden and will emit an alert during the
HAProxy startup:
1a
1/2
1-2-3
This bug was reported on Github. See issue #36.
This patch may be backported to 1.9 and 1.8.
For some embedded systems, it's pointless to have 32- or even 64- large
arrays of processes when it's known that much fewer processes will be
used in the worst case. Let's introduce this MAX_PROCS define which
contains the highest number of processes allowed to run at once. It
still defaults to LONGBITS but may be lowered.
This also depends on the nbthread count, so it must only be performed after
parsing the whole config file. As a side effect, this removes some code
duplication between servers and server-templates.
This must be backported to 1.9.
The idle conns lists are sized according to the number of threads. As such
they cannot be initialized during the parsing since nbthread can be set
later, as revealed by this simple config which randomly crashes when used.
Let's do this at the end instead.
listen proxy
bind :4445
mode http
timeout client 10s
timeout server 10s
timeout connect 10s
http-reuse always
server s1 127.0.0.1:8000
global
nbthread 8
This fix must be backported to 1.9 and 1.8.
When commit 151e1ca98 ("BUG/MAJOR: config: verify that targets of track-sc
and stick rules are present") added a check for some process inconsistencies
between rules and their stick tables, some errors resulted in a "return 0"
statement, which is taken as "no error" in some cases. Let's fix this.
This must be backported to all versions using the above commit.
Stick and track-sc rules may optionally designate a table in a different
proxy. In this case, a number of verifications are made such as validating
that this proxy actually exists. However, in multi-process mode, the target
table might indeed exist but not be bound to the set of processes the rules
will execute on. This will definitely result in a random behaviour especially
if these tables do require peer synchronization, because some tasks will be
started to try to synchronize form uninitialized areas.
The typical issue looks like this :
peers my-peers
peer foo ...
listen proxy
bind-process 1
stick on src table ip
...
backend ip
bind-process 2
stick-table type ip size 1k peers my-peers
While it appears obvious that the example above will not work, there are
less obvious situations, such as having bind-process in a defaults section
and having a larger set of processes for the referencing proxy than the
referenced one.
The present patch adds checks for such situations by verifying that all
processes from the referencing proxy are present on the other one in all
track-sc* and stick-* rules, and in sample fetch / converters referencing
another table so that sc_inc_gpc0() and similar are safe as well.
This fix must be backported to all maintained versions. It may potentially
disrupt configurations which already randomly crash. There hardly is any
intermediary solution though, such configurations need to be fixed.
At a number of places we used to have null tests on bind_proc for
listeners and proxies. Let's simplify all these tests by always
having the proper bits reported via proc_mask().
When no nbproc is specified, a computation leads to reading bind_thread[-1]
before checking if the thread mask is valid for a bind conf. It may either
report a false warning and compute a wrong mask, or miss some incorrect
configs.
This must be backported to 1.9 and possibly 1.8.
This bug was introduced by 355b203 commit which prevented the peer
addresses to be parsed for the local peer of a "peers" section.
When adding "parse_addr" boolean parameter to parse_server(), this commit
missed the case where the syntax with "peer" keyword should still be
supported in addition to the new syntax with "server"+"bind" keyword.
May be backported as fas as 1.5.
Some servers may wish to limit the total number of requests they execute
over a connection because some of their components might leak resources.
In HTTP/1 it was easy, they just had to emit a "connection: close" header
field with the last response. In HTTP/2, it's less easy because the info
is not always shared with the component dealing with the H2 protocol and
it could be harder to advertise a GOAWAY with a stream limit.
This patch provides a solution to this by adding a new "max-reuse" parameter
to the server keyword. This parameter indicates how many times an idle
connection may be reused for new requests. The information is made available
and the underlying muxes will be able to use it at will.
This patch should be backported to 1.9.
Make "bind" keywork be supported in "peers" sections.
All "bind" settings are supported on this line.
Add "default-bind" option to parse the binding options excepted the bind address.
Do not parse anymore the bind address for local peers on "server" lines.
Do not use anymore list_for_each_entry() to set the "peers" section
listener parameters because there is only one listener by "peers" section.
May be backported to 1.5 and newer.
This patch adds pointer to a struct server to peer structure which
is initialized after having parsed a remote "peer" line.
After having parsed all peers section we run ->prepare_srv to initialize
all SSL/TLS stuff of remote perr (or server).
Remaining thing to do to completely support peer protocol over SSL/TLS:
make "bind" keyword be supported in "peers" sections to make SSL/TLS
incoming connections to local peers work.
May be backported to 1.5 and newer.
With this patch "default-server" lines are supported in "peers" sections
to setup the default settings of peers which are from now setup
when parsing both "peer" and "server" lines.
May be backported to 1.5 and newer.
Even if not already the case, we suppose that the frontend "peers" section
may have been already initialized outside of "peer" line, we seperate
their initializations from their binding initializations.
May be backported to 1.5 and newer.
Use ->local "peers" struct member to flag a "peers" section frontend
has being initialized. This is to be able to initialize the frontend
of "peers" sections on lines different from "peer" lines.
May be backported to 1.5 and newer.
Create init_peers_frontend() function to allocate and initialize
the frontend of "peers" sections (->peers_fe) so that to reuse it later.
May be backported to 1.5 and newer.
This one is a proxy option which can be inherited from defaults even
if the LB algo changes. Move it out of the lb_chash struct so that we
don't need to keep anything separate between these structs. This will
allow us to merge them into an union later. It even takes less room
now as it fills a hole and removes another one.
In session, don't keep an infinite number of connection that can idle.
Add a new frontend parameter, "max-session-srv-conns" to set a max number,
with a default value of 5.
Instead of the old "idle-timeout" mechanism, add a new option,
"pool-purge-delay", that sets the delay before purging idle connections.
Each time the delay happens, we destroy half of the idle connections.
Add a new command, "pool-max-conn" that sets the maximum number of connections
waiting in the orphan idling connections list (as activated with idle-timeout).
Using "-1" means unlimited. Using pools is now dependant on this.
Change the default for http-reuse from "never" to "safe", as it has been
the recommended setting for a few versions now and backend H2 makes little
sense without it.
Some warnings were removed from the config parser since it can dynamically
be disabled depending on the server's configuration, so there's no need to
disable it on a whole backend just for one server.
Currently a mux may be forced on a bind or server line by specifying the
"proto" keyword. The problem is that the mux may depend on the proxy's
mode, which is not known when parsing this keyword, so a wrong mux could
be picked.
Let's simply update the mux entry while checking its validity. We do have
the name and the side, we only need to see if a better mux fits based on
the proxy's mode. It also requires to remove the side check while parsing
the "proto" keyword since a wrong mux could be picked.
This way it becomes possible to declare multiple muxes with the same
protocol names and different sides or modes.
Wrong variable was used to know if we need to call the callback
post_section_parser() or not. We must use 'cs' and not 'pcs'.
This patch must be backported in 1.8 with the commit 7805e2b ("BUG/MINOR:
cfgparse: Fix transition between 2 sections with the same name").
When a section's parser is registered, it can also define a post section
callback, called at the end of the section parsing. But when 2 sections with the
same name followed each other, the transition between them was missed. This
induced 2 bugs. First, the call to the post section callback was skipped. Then,
the parsing of the second section was mixed with the first one.
This patch must be backported in 1.8.
In some situations, especially when dealing with low latency on processors
supporting a variable frequency or when running inside virtual machines,
each time the process waits for an I/O using the poller, the processor
goes back to sleep or is offered to another VM for a long time, and it
causes excessively high latencies.
A solution to this provided by this patch is to enable busy polling using
a global option. When busy polling is enabled, the pollers never sleep and
loop over themselves waiting for an I/O event to happen or for a timeout
to occur. On multi-processor machines it can significantly overheat the
processor but it usually results in much lower latencies.
A typical test consisting in injecting traffic over a single connection at
a time over the loopback shows a bump from 4640 to 8540 connections per
second on forwarded connections, indicating a latency reduction of 98
microseconds for each connection, and a bump from 12500 to 21250 for
locally terminated connections (redirects), indicating a reduction of
33 microseconds.
It is only usable with epoll and kqueue because select() and poll()'s
API is not convenient for such usages, and the level of performance they
are used in doesn't benefit from this anyway.
The option, which obviously remains disabled by default, can be turned
on using "busy-polling" in the global section, and turned off later
using "no busy-polling". Its status is reported in "show info" to help
troubleshooting suspicious CPU spikes.
Because the HTX is still experimental, we must add special cases during the
configuration check to be sure it is not enabled on a proxy with incompatible
options. Here, for HTX proxies, when a mux protocol is specified on a bind line
or a server line, we must force the HTX mode (PROTO_MODE_HTX).
Concretely, H2 is the only mux protocol that can be forced. And it doesn't yet
support the HTX. So forcing the H2 on an HTX proxy will always fail.
This was the largest function of the whole file, taking a rough second
to build alone. Let's move it to a distinct file along with a few
dependencies. Doing so saved about 2 seconds on the total build time.
The config parser is the largest file to build and its build dominates
the total project's build time. Let's start to split it into multiple
smaller pieces by extracting the "global" section parser into a new
file called "cfgparse-global.c". This removes 1/4th of the file's build
time.
To be used, error messages declared in a default section must be copied when the
parsing of a proxy section starts. But this was only done for frontends.
This patch may be backported to older versions.
In 1.8, commit 45a66cc ("MEDIUM: config: ensure that tune.bufsize is at
least 16384 when using HTTP/2") tried to avoid an annoying issue making
H2 fail when haproxy is built with default buffer sizes smaller than 16kB,
which used to be the case for a very long time. Sadly, the test only sees
when NPN/ALPN exactly match "h2" and not when it's combined like
"h2,http/1.1" nor "http/1.1,h2". We can safely use strstr() there because
the string is prefixed by the token's length (0x02) which is unambiguous
as it cannot be part of any other token.
This fix should be backported to 1.8 as a safety guard against bad
configurations.
This patch implements analysers for parsing the CLI and extra features
for the master's CLI.
For each command (sent alone, or separated by ; or \n) the request
analyser will determine to which server it should send the request.
The 'mode cli' proxy is able to parse a prefix for each command which is
used to select the apropriate server. The prefix start by @ and is
followed by "master", the PID preceded by ! or the relative PID. (e.g.
@master, @1, @!1234). The servers are not round-robined anymore.
The command is sent with a SHUTW which force the server to close the
connection after sending its response. However the proxy allows a
keepalive connection on the client side and does not close.
The response analyser does not do much stuff, it only reinits the
connection when it received a close from the server, and forward the
response. It does not analyze the response data.
The only guarantee of the end of the response is the close of the
server, we can't rely on the double \n since it's not send by every
command.
This could be reimplemented later as a filter.
This option makes a proxy use only HTX-compatible muxes instead of the
HTTP-compatible ones for HTTP modes. It must be set on both ends, this
is checked at parsing time.
