This was the first transparent proxy technology supported by haproxy
circa 2005 but it was obsoleted in 2007 by Tproxy 4.0 which removed a
lot of the earlier versions' shortcomings and was finally merged into
the kernel. Since nobody has been using cttproxy for many years now
and nobody has even just tried to compile the files, it's time to
remove it. The doc was updated as well.
This patch normalize the return code of the configuration parsers. Before
these changes, the tcp action parser returned -1 if fail and 0 for the
succes. The http action returned 0 if fail and 1 if succes.
The normalisation does:
- ACT_RET_PRS_OK for succes
- ACT_RET_PRS_ERR for failure
Each (http|tcp)-(request|response) action use the same method
for looking up the action keyword during the cofiguration parsing.
This patch mutualize the code.
This patch merges the conguration keyword struct. Each declared configuration
keyword struct are similar with the others. This patch simplify the code.
Action function can return 3 status:
- error if the action encounter fatal error (like out of memory)
- yield if the action must terminate his work later
- continue in other cases
For performances considerations, some actions are not processed by remote
function. They are directly processed by the function. Some of these actions
does the same things but for different processing part (request / response).
This patch give the same name for the same actions, and change the normalization
of the other actions names.
This patch is ONLY a rename, it doesn't modify the code.
This patch group the action name in one file. Some action are called
many times and need an action embedded in the action caller. The main
goal is to have only one header file grouping all definitions.
This patch is the first of a serie which merge all the action structs. The
function "tcp-request content", "tcp-response-content", "http-request" and
"http-response" have the same values and the same process for some defined
actions, but the struct and the prototype of the declared function are
different.
This patch try to unify all of these entries.
The union name "data" is a little bit heavy while we read the source
code because we can read "data.data.sint". The rename from "data" to "u"
makes the read easiest like "data.u.sint".
This patch remove the struct information stored both in the struct
sample_data and in the striuct sample. Now, only thestruct sample_data
contains data, and the struct sample use the struct sample_data for storing
his own data.
This flag is set on an outgoing connection when this connection gets
some properties that must not be shared with other connections, such
as dynamic transparent source binding, SNI or a proxy protocol header,
or an authentication challenge from the server. This will be needed
later to implement connection reuse.
This patch removes the 32 bits unsigned integer and the 32 bit signed
integer. It replaces these types by a unique type 64 bit signed.
This makes easy the usage of integer and clarify signed and unsigned use.
With the previous version, signed and unsigned are used ones in place of
others, and sometimes the converter loose the sign. For example, divisions
are processed with "unsigned", if one entry is negative, the result is
wrong.
Note that the integer pattern matching and dotted version pattern matching
are already working with signed 64 bits integer values.
There is one user-visible change : the "uint()" and "sint()" sample fetch
functions which used to return a constant integer have been replaced with
a new more natural, unified "int()" function. These functions were only
introduced in the latest 1.6-dev2 so there's no impact on regular
deployments.
This modification makes possible to use sample_fetch_string() in more places,
where we might need to fetch sample values which are not plain strings. This
way we don't need to fetch string, and convert it into another type afterwards.
When using aliased types, the caller should explicitly check which exact type
was returned (e.g. SMP_T_IPV4 or SMP_T_IPV6 for SMP_T_ADDR).
All usages of sample_fetch_string() are converted to use new function.
Commit cc87a11 ("MEDIUM: tcp: add register keyword system.") broke the
TCP ruleset by merging custom rules and accept. It was fixed a first time
by commit e91ffd0 ("BUG/MAJOR: tcp: only call registered actions when
they're registered") but the accept action still didn't work anymore
and was causing the matching rule to simply be ignored.
Since the code introduced a very fragile behaviour by not even mentionning
that accept and custom were silently merged, let's fix this once for all by
adding an explicit check for the accept action. Nevertheless, as previously
mentionned, the action should be changed so that custom is the only action
and the continue vs break indication directly comes from the callee.
No backport is needed, this bug only affects 1.6-dev.
This patch adds support of variables during the processing of each stream. The
variables scope can be set as 'session', 'transaction', 'request' or 'response'.
The variable type is the type returned by the assignment expression. The type
can change while the processing.
The allocated memory can be controlled for each scope and each request, and for
the global process.
This patch permits to register a new keyword with the keyword "tcp-request content"
'tcp-request connection", tcp-response content", http-request" and "http-response"
which is identified only by matching the start of the keyword.
for example, we register the keyword "set-var" with the option "match_pfx"
and the configuration keyword "set-var(var_name)" matchs this entry.
Actually, the tcp-request and tcp-response custom ation are always final
actions. This patch create a new type of action that can permit to
continue the evaluation of tcp-request and tcp-response processing.
This patch removes the structs "session", "stream" and "proxy" from
the sample-fetches and converters function prototypes.
This permits to remove some weight in the prototype call.
Commit cc87a11 ("MEDIUM: tcp: add register keyword system.") introduced
the registration of new keywords for TCP rulesets. Unfortunately it
replaced the "accept" action with an unconditionnal call to the rule's
action function, resulting in an immediate segfault when using the
"accept" action in a TCP ruleset.
This bug reported by Baptiste Assmann was introduced in 1.6-dev1, no
backport is needed.
Commit bc4c1ac ("MEDIUM: http/tcp: permit to resume http and tcp custom
actions") introduced the ability to interrupt and restart processing in
the middle of a TCP/HTTP ruleset. But it doesn't do it in a consistent
way : it checks current_rule_list, immediately dereferences current_rule,
which is only set in certain cases and never cleared. So that broke the
tcp-request content rules when the processing was interrupted due to
missing data, because current_rule was not yet set (segfault) or could
have been inherited from another ruleset if it was used in a backend
(random behaviour).
The proper way to do it is to always set current_rule before dereferencing
it. But we don't want to set it for all rules because we don't want any
action to provide a checkpointing mechanism. So current_rule is set to NULL
before entering the loop, and only used if not NULL and if current_rule_list
matches the current list. This way they both serve as a guard for the other
one. This fix also makes the current rule point to the rule instead of its
list element, as it's much easier to manipulate.
No backport is needed, this is 1.6-specific.
It passes a NULL wherever a stream was needed (acl_exec_cond() and
action_ptr mainly). It can still track the connection rate correctly
and block based on ACLs.
Many such function need a session, and till now they used to dereference
the stream. Once we remove the stream from the embryonic session, this
will not be possible anymore.
So as of now, sample fetch functions will be called with this :
- sess = NULL, strm = NULL : never
- sess = valid, strm = NULL : tcp-req connection
- sess = valid, strm = valid, strm->txn = NULL : tcp-req content
- sess = valid, strm = valid, strm->txn = valid : http-req / http-res
All of them can now retrieve the HTTP transaction *if it exists* from
the stream and be sure to get NULL there when called with an embryonic
session.
The patch is a bit large because many locations were touched (all fetch
functions had to have their prototype adjusted). The opportunity was
taken to also uniformize the call names (the stream is now always "strm"
instead of "l4") and to fix indent where it was broken. This way when
we later introduce the session here there will be less confusion.
Now this one is dynamically allocated. It means that 280 bytes of memory
are saved per TCP stream, but more importantly that it will become
possible to remove the l7 pointer from fetches and converters since
it will be deduced from the stream and will support being null.
A lot of care was taken because it's easy to forget a test somewhere,
and the previous code used to always trust s->txn for being valid, but
all places seem to have been visited.
All HTTP fetch functions check the txn first so we shouldn't have any
issue there even when called from TCP. When branching from a TCP frontend
to an HTTP backend, the txn is properly allocated at the same time as the
hdr_idx.
The header captures are now general purpose captures since tcp rules
can use them to capture various contents. That removes a dependency
on http_txn that appeared in some sample fetch functions and in the
order by which captures and http_txn were allocated.
Interestingly the reset of the header captures were done at too many
places as http_init_txn() used to do it while it was done previously
in every call place.
When s->si[0].end was dereferenced as a connection or anything in
order to retrieve information about the originating session, we'll
now use sess->origin instead so that when we have to chain multiple
streams in HTTP/2, we'll keep accessing the same origin.
Just like for the listener, the frontend is session-wide so let's move
it to the session. There are a lot of places which were changed but the
changes are minimal in fact.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
The purpose of these two macros will be to pass via the session to
find the relevant stream interfaces so that we don't need to store
the ->cons nor ->prod pointers anymore. Currently they're only defined
so that all references could be removed.
Note that many places need a second pass of clean up so that we don't
have any chn_prod(&s->req) anymore and only &s->si[0] instead, and
conversely for the 3 other cases.
The channels were pointers to outside structs and this is not needed
anymore since the buffers have moved, but this complicates operations.
Move them back into the session so that both channels and stream interfaces
are always allocated for a session. Some places (some early sample fetch
functions) used to validate that a channel was NULL prior to dereferencing
it. Now instead we check if chn->buf is NULL and we force it to remain NULL
until the channel is initialized.
Later, the processing of some actions needs to be interrupted and resumed
later. This patch permit to resume the actions. The actions that needs
to run with the resume mode are not yet avalaible. It will be soon with
Lua patches. So the code added by this patch is untestable for the moment.
The list of "tcp_exec_req_rules" cannot resme because is called by the
unresumable function "accept_session".
This patch introduces an action keyword registration system for TCP
rulesets similar to what is available for HTTP rulesets. This sytem
will be useful with lua.
On Linux since 2.6.37, it's possible to set the socket timeout for
pending outgoing data, with an accuracy of 1 millisecond. This is
pretty handy to deal with dead connections to clients and or servers.
For now we only implement it on the frontend side (bind line) so
that when a client disappears from the net, we're able to quickly
get rid of its connection and possibly release a server connection.
This can be useful with long-lived connections where an application
level timeout is not suited because long pauses are expected (remote
terminals, connection pools, etc).
Thanks to Thijs Houtenbos and John Eckersberg for the suggestion.
create_server_socket() used to dereference objt_server(conn->target),
but if the target is not a server (eg: a proxy) then it's NULL and we
get a segfault. This can be reproduced with a proxy using "dispatch"
with no server, even when namespaces are disabled, because that code
is not #ifdef'd. The fix consists in first checking if the target is
a server.
This fix does not need to be backported, this is 1.6-only.
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
There's an issue when using SO_ORIGINAL_DST to retrieve the original
destination of a connection's address before being translated by
Netfilter's DNAT/REDIRECT or the old TPROXY. SO_ORIGINAL_DST is
able to retrieve an IPv4 address when the original destination was
IPv4 mapped into IPv6. At first glance it's not a big deal, but it
is for logging and for the proxy protocol, because we then have
two different address families for the source and destination. In
this case, the proxy protocol correctly detects the issue and emits
"UNKNOWN".
In order to fix this, we perform getsockname() first, and only if
the address family is AF_INET, then we perform the getsockopt() call.
This fix must be backported to 1.5, and probably even to 1.4 and 1.3.
During a tcp connection setup in tcp_connect_server(), we check if
there are pending data to start polling for writes immediately. We
also use the same test to know if we can disable the quick ack and
merge the first data packet with the connection's ACK. This last
case is also valid for the proxy protocol.
The problem lies in the way it's done, as the "data" variable is
improperly completed with the presence of the proxy protocol, resulting
in the connection being polled for data writes if the proxy protocol is
enabled. It's not a big issue per se, except that the proxy protocol
uses the fact that we're polling for data to know if it can use MSG_MORE.
This causes no problem on HTTP/HTTPS, but with banner protocols, it
introduces a 200ms delay if the server waits for the PROXY header.
This has been caused by the connection management changes introduced in
1.5-dev12, specifically commit a1a7474 ("MEDIUM: proxy-proto: don't use
buffer flags in conn_si_send_proxy()"), so this fix must be backported
to 1.5.
MAX_SESS_STKCTR allows one to define the number of stick counters that can
be used in parallel in track-sc* rules. The naming of this macro creates
some confusion because the value there is sometimes used as a max instead
of a count, and the config parser accepts values from 0 to MAX_SESS_STKCTR
and the processing ignores anything tracked on the last one. This means
that by default, track-sc3 is allowed and ignored.
This fix must be backported to 1.5 where the problem there only affects
TCP rules.
A config where a tcp-request rule appears after an http-request rule
might seem valid but it is not. So let's report a warning about this
since this case is hard to detect by the naked eye.
