In the syslog applet, when there is no output data, nothing is performed and
the applet leaves by requesting more data. But it is an issue because a
client abort is only handled if it reported with the last bytes of the
message. If the abort occurs after the message was handled, it is ignored.
The session remains opened and inactive until the client timeout is being
triggered. It no such timeout is configured, given that the default maxconn
is 10, all slots can be quickly busy and make the applet unresponsive.
To fix the issue, the best is to always try to read a message when the I/O
handle is called. This way, the abort can be handled. And if there is no
data, we leave as usual.
This patch should fix the issue #2112. It must be backported as far as 2.4.
When the log applet is executed while a shut is pending, the remaining
output data must always be consumed. Otherwise, this can prevent the stream
to exit, leading to a spinning loop on the applet.
It is 2.8-specific. No backport needed.
Just like for other applets, we now use the SE descriptor instead of the
channel to report error and end-of-stream.
Here, the refactoring only reports errors by setting SE_FL_ERROR flag.
In the syslog applet, when a message was not fully received, we must request
for more data by calling appctx_need_more_data() and not by setting
CF_READ_DONTWAIT flag on the request channel. Indeed, this flag is only used
to only try a read at once.
This patch could be backported as far as 2.4. On 2.5 and 2.4,
applet_need_more_data() must be replaced by si_cant_get().
It was done by hand by callers when a shutdown for read or write was
performed. It is now always handled by the functions performing the
shutdown. This way the callers don't take care of it. This will avoid some
bugs.
This field is used by stream_new() to optionally set the applet the
stream will connect to for simple proxies like the CLI for example.
But it has never been configurable to anything and is always strictly
equal to the frontend's ->default_target. Let's just drop it and make
stream_new() only use the frontend's. It makes more sense anyway as
we don't want the proxy to work differently based on the "bind" line.
This idea was brought in 1.6 hoping that the h2 implementation would
use applets for decoding (which was dropped after the very first
attempt in 1.8).
The accept callback directly derives from the upper layer, generally
it's session_accept_fd(). As such it's also defined per bind line
so it makes sense to move it there.
Like for previous values, maxaccept is really per-bind_conf, so let's
move it there. Some frontends (peers, log) set it to 1 so the assignment
was slightly moved.
When bind_conf were created, some elements such as the analysers mask
ought to have moved there but that wasn't the case. Now that it's
getting clearer that bind_conf provides all binding parameters and
the listener is essentially a listener on an address, it's starting
to get really confusing to keep such parameters in the listener, so
let's move the mask to the bind_conf. We also take this opportunity
for pre-setting the mask to the frontend's upon initalization. Now
several loops have one less argument to take care of.
Add cum_sess_ver[] new array of counters to count the number of cumulated
HTTP sessions by version (h1, h2 or h3).
Implement proxy_inc_fe_cum_sess_ver_ctr() to increment these counter.
This function is called each a HTTP mux is correctly initialized. The QUIC
must before verify the application operations for the mux is for h3 before
calling proxy_inc_fe_cum_sess_ver_ctr().
ST_F_SESS_OTHER stat field for the cumulated of sessions others than
HTTP sessions is deduced from ->cum_sess_ver counter (for all the session,
not only HTTP sessions) from which the HTTP sessions counters are substracted.
Add cum_req[] new array of counters to count the number of cumulated HTTP
requests by version and others than HTTP requests. This new member replace ->cum_req.
Modify proxy_inc_fe_req_ctr() which increments these counters to pass an HTTP
version, 0 special values meaning "other than an HTTP request". This is the case
for instance for syslog.c from which proxy_inc_fe_req_ctr() is called with 0
as version parameter.
ST_F_REQ_TOT stat field compputing for the cumulated number of requests is modified
to count the sum of all the cum_req[] counters.
As this patch is useful for QUIC, it must be backported to 2.7.
CF_READ_NULL flag is not really useful and used. It is a transient event
used to wakeup the stream. As we will see, all read events on a channel may
be resumed to only one and are all used to wake up the stream.
In this patch, we introduce CF_READ_EVENT flag as a replacement to
CF_READ_NULL. There is no breaking change for now, it is just a
rename. Gradually, other read events will be merged with this one.
In parse_log_message(), if log is rfc5424 compliant, p pointer
is incremented and size is not. However size is still used in further
checks as if p pointer was not incremented.
This could lead to logic error or buffer overflow if input buf is not
null-terminated.
Fixing this by making sure size is up to date where it is needed.
It could be backported up to 2.4.
syslog_io_handler does specific treatment to handle syslog tcp octet
counting:
Logic was good, but a sneaky mistake prevented
rfc-6587 octet counting from working properly.
trash.area was used as an input buffer.
It does not make sense here since it is uninitialized.
Compilation was unaffected because trash is a thread
local "global" variable.
buf->area should definitely be used instead.
This should be backported as far as 2.4.
When a ring is used as log target, the original facility, if any, must be
preserved. The default facility must only be used if there no facility was
found in the incoming log message.
This patch should fix the issue #1901. It must be backported as far as 2.4.
Patrick Hemmer reported an improper log behavior when using
log-format to escape log data (+E option):
Some bytes were truncated from the output:
- escape_string() function now takes an extra parameter that
allow the caller to specify input string stop pointer in
case the input string is not guaranteed to be zero-terminated.
- Minors checks were added into lf_text_len() to make sure dst
string will not overflow.
- lf_text_len() now makes proper use of escape_string() function.
This should be backported as far as 1.8.
Since commit 2071a99df ("MINOR: listener/ssl: set the SSL xprt layer only
once the whole config is known") the xprt is initialized for ssl directly
from a generic funtion used to parse bind args.
But the 'bind' lines from 'log-forward' sections were forgotten in commit
55f0f7bb5 ("MINOR: config: use the new bind_parse_args_list() to parse a
"bind" line").
This patch re-works 'log-forward' section parsing to use the generic
function to parse bind args and fix the issue.
Since the generic way to parse was introduced in 2.6, this patch
should be backported as far as this version.
The commit 731c8e6cf ("MINOR: stream: Simplify retries counter calculation")
introduced a regression. It broke the dontlog-normal option because the test
on the connection retries counter was not updated accordingly.
This patch should fix the issue #1754. It must be backported to 2.6.
The check struct had a "cs" field renamed to "sc", which also required
a tiny update to a few functions using it to distinguish a check from
a stream (log.c, payload.c, ssl_sample.c, tcp_sample.c, tcpcheck.c,
connection.c).
Function arguments and local variables called "cs" were renamed to "sc".
The presence of one "cs=" in the debugging traces was also turned to
"sc=" for consistency.
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
These functions return the app-layer associated with an stconn, which
is a check, a stream or a stream's task. They're used a lot to access
channels, flags and for waking up tasks. Let's just name them
appropriately for the stream connector.
We're starting to propagate the stream connector's new name through the
API. Most call places of these functions that retrieve the channel or its
buffer are in applets. The local variable names are not changed in order
to keep the changes small and reviewable. There were ~92 uses of cs_ic(),
~96 of cs_oc() (due to co_get*() being less factorizable than ci_put*),
and ~5 accesses to the buffer itself.
This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
There's been some great confusion between proto_type, ctrl_type and
sock_type. It turns out that ctrl_type was improperly chosen because
it's not the control layer that is of this or that type, but the
transport layer, and it turns out that the transport layer doesn't
(normally) denaturate the underlying control layer, except for QUIC
which turns dgrams to streams. The fact that the SOCK_{DGRAM|STREAM}
set of values was used added to the confusion.
Let's replace it with xprt_type which reuses the later introduced
PROTO_TYPE_* values, and update the comments to explain which one
works at what level.
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
This gets rid of most open-coded fcntl() calls, some of which were passed
through DISGUISE() to avoid a useless test. The FD_CLOEXEC was most often
set without preserving previous flags, which could become a problem once
new flags are created. Now this will not happen anymore.
Some older systems may routinely return EWOULDBLOCK for some syscalls
while we tend to check only for EAGAIN nowadays. Modern systems define
EWOULDBLOCK as EAGAIN so that solves it, but on a few older ones (AIX,
VMS etc) both are different, and for portability we'd need to test for
both or we never know if we risk to confuse some status codes with
plain errors.
There were few entries, the most annoying ones are the switch/case
because they require to only add the entry when it differs, but the
other ones are really trivial.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
The source and destination addresses at the applicative layer are moved from
the stream-interface to the conn-stream. This simplifies a bit the code and
it is a logicial step to remove the stream-interface.
The conn_retries counter was set to the max value and decremented at each
connection retry. Thus the counter reflected the number of retries left and
not the real number of retries. All calculations of redispatch or reporting
of number of retries experienced were made using subtracts from the
configured retries, which was complicated and didn't bring any benefit.
Now, this counter is set to 0 and incremented at each retry. We know we've
reached the maximum allowed connection retries by comparing it to the
configured value. In all other cases, we directly use the counter.
This patch should address the feature request #1608.
The conn_retries counter may be moved into the stream structure. It only
concerns the connection establishment. The frontend stream-interface does not
use it. So it is a logical change.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
We used to check if the transport layer was ssl_sock to decide to log
"~" after a frontend's name. Now that QUIC is present, this doesn't work
anymore. Better rely on the transport layer's get_ssl_sock_ctx() method.
211ea252d ("BUG/MINOR: logs: fix logsrv leaks on clean exit") introduced a
regression because the list element of a new log server is not intialized. Thus
HAProxy crashes on error path when an invalid log server is released.
This patch shoud fix the issue #1636. It must be backported if the above commit
is backported. For now, it is 2.6-specific and no backport is needed.
Previous uses of `ist.cocci` did not add `--include-headers-for-types` and
`--recursive-includes` preventing Coccinelle seeing `struct ist` members of
other structs.
Reapply the patch with proper flags to further clean up the use of the ist API.
The command used was:
spatch -sp_file dev/coccinelle/ist.cocci -in_place --include-headers --include-headers-for-types --recursive-includes --dir src/
Log servers are a real mess because:
- entries are duplicated using memcpy() without their strings being
reallocated, which results in these ones not being freeable every
time.
- a new field, ring_name, was added in 2.2 by commit 99c453df9
("MEDIUM: ring: new section ring to declare custom ring buffers.")
but it's never initialized during copies, causing the same issue
- no attempt is made at freeing all that.
Of course, running "haproxy -c" under ASAN quickly notices that and
dumps a core.
This patch adds the missing strdup() and initialization where required,
adds a new free_logsrv() function to cleanly free() such a structure,
calls it from the proxy when iterating over logsrvs instead of silently
leaking their file names and ring names, and adds the same logsrv loop
to the proxy_free_defaults() function so that we don't leak defaults
sections on exit.
It looks a bit entangled, but it comes as a whole because all this stuff
is inter-dependent and was missing.
It's probably preferable not to backport this in the foreseable future
as it may reveal other jokes if some obscure parts continue to memcpy()
the logsrv struct.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the log part.
frontend and backend conn-streams are now directly accesible from the
stream. This way, and with some other changes, it will be possible to remove
the stream-interfaces from the stream structure.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
For each new log forward section, the proxy was added to the log forward
proxy list but the ref on the previous log forward section's proxy was
scratched using "init_new_proxy" which performs a memset. After configuration
parsing this list contains only the last section's proxy.
The post processing walk through this list to resolve "ring" names.
Since some section's proxies are missing in this list, the resolving
is not done for those ones and the pointer on the ring is kept to null
causing a segfault at runtime trying to write a log message
into the ring.
This patch shift the "init_new_proxy" before adding the ref on the
previous log forward section's proxy on currently parsed one.
This patch shoud fix github issue #1464
This patch should be backported to 2.3
