Instead of storing a couple of (int, ptr) in the struct connection
and the struct session, we use a different method : we only store a
pointer to an integer which is stored inside the target object and
which contains a unique type identifier. That way, the pointer allows
us to retrieve the object type (by dereferencing it) and the object's
address (by computing the displacement in the target structure). The
NULL pointer always corresponds to OBJ_TYPE_NONE.
This reduces the size of the connection and session structs. It also
simplifies target assignment and compare.
In order to improve the generated code, we try to put the obj_type
element at the beginning of all the structs (listener, server, proxy,
si_applet), so that the original and target pointers are always equal.
A lot of code was touched by massive replaces, but the changes are not
that important.
si_fd() is not used a lot, and breaks builds on OpenBSD 5.2 which
defines this name for its own purpose. It's easy enough to remove
this one-liner function, so let's do it.
This patch adds input and output rate calcutation on the HTTP compresion
feature.
Compression can be limited with a maximum rate value in kilobytes per
second. The rate is set with the global 'maxcomprate' option. You can
change this value dynamicaly with 'set rate-limit http-compression
global' on the UNIX socket.
Keys are copied from samples to stick_table_key. If a key is larger
than the stick_table_key, we have an overflow. In pratice it does not
happen because it requires :
1) a configuration with tune.bufsize larger than BUFSIZE (common)
2) a stick-table configured with keys strictly larger than buffers
3) extraction of data larger than BUFSIZE (eg: using payload())
Points 2 and 3 don't make any sense for a real world configuration. That
said the issue needs be fixed. The solution consists in allocating it the
same size as the global buffer size, just like the samples. This fixes the
issue.
The trash is used everywhere to store the results of temporary strings
built out of s(n)printf, or as a storage for a chunk when chunks are
needed.
Using global.tune.bufsize is not the most convenient thing either.
So let's replace trash with a chunk and directly use it as such. We can
then use trash.size as the natural way to get its size, and get rid of
many intermediary chunks that were previously used.
The patch is huge because it touches many areas but it makes the code
a lot more clear and even outlines places where trash was used without
being that obvious.
This function's naming was misleading as it is used to append data
at the end of a string, causing some surprizes when used for the
first time!
Add a chunk_printf() function which does what its name suggests.
We will need to be able to switch server connections on a session and
to keep idle connections. In order to achieve this, the preliminary
requirement is that the connections can survive the session and be
detached from them.
Right now they're still allocated at exactly the same place, so when
there is a session, there are always 2 connections. We could soon
improve on this by allocating the outgoing connection only during a
connect().
This current patch touches a lot of code and intentionally does not
change any functionnality. Performance tests show no regression (even
a very minor improvement). The doc has not yet been updated.
Using "stats bind-process", it becomes possible to indicate to haproxy which
process will get the incoming connections to the stats socket. It will also
shut down the warning when nbproc > 1.
With this commit, we now separate the channel from the buffer. This will
allow us to replace buffers on the fly without touching the channel. Since
nobody is supposed to keep a reference to a buffer anymore, doing so is not
a problem and will also permit some copy-less data manipulation.
Interestingly, these changes have shown a 2% performance increase on some
workloads, probably due to a better cache placement of data.
The health checks in the servers are becoming a real mess, move them
into their own subsection. We'll soon need to have a struct buffer to
replace the char * as well as check-specific protocol and transport
layers.
While working on the changes required to make the health checks use the
new connections, it started to become obvious that some naming was not
logical at all in the connections. Specifically, it is not logical to
call the "data layer" the layer which is in charge for all the handshake
and which does not yet provide a data layer once established until a
session has allocated all the required buffers.
In fact, it's more a transport layer, which makes much more sense. The
transport layer offers a medium on which data can transit, and it offers
the functions to move these data when the upper layer requests this. And
it is the upper layer which iterates over the transport layer's functions
to move data which should be called the data layer.
The use case where it's obvious is with embryonic sessions : an incoming
SSL connection is accepted. Only the connection is allocated, not the
buffers nor stream interface, etc... The connection handles the SSL
handshake by itself. Once this handshake is complete, we can't use the
data functions because the buffers and stream interface are not there
yet. Hence we have to first call a specific function to complete the
session initialization, after which we'll be able to use the data
functions. This clearly proves that SSL here is only a transport layer
and that the stream interface constitutes the data layer.
A similar change will be performed to rename app_cb => data, but the
two could not be in the same commit for obvious reasons.
Since recent changes on the global frontend, it was not possible anymore
to soft-reload a process which had a stats socket because the socket would
not be disabled upon reload. The only solution to this endless madness is
to have the global frontend part of normal proxies.
Since we don't want to get an ID that shifts all other proxies and causes
trouble in deployed environments, we assign it ID #0 which other proxies
can't grab, and we don't report it in the stats pages.
It is sometimes useful to completely disable accepting new connections
on a frontend during maintenance operations. By setting a frontend's
maxconn to zero, connections are not accepted anymore until the limit
is increased again.
Recent commit 4348fad1 (listeners: use dual-linked lists to chain listeners
with frontends) broke frontend lookup in stats sockets by using the wrong
iterator in the listeners.
The global stats socket statement now makes use of the standard bind parsers.
This results in all UNIX socket options being set by proto_uxst and in all
TCP and SSL options being inherited and usable. For example it is now possible
to enable a stats socket over SSL/TCP by appending the "ssl" keyword and a
certificate after "crt".
The code is simplified since we don't have a special case to parse this config
keyword anymore.
Now the stats socket is allocated when the 'stats socket' line is parsed,
and assigned using the standard str2listener(). This has two effects :
- more than one stats socket can now be declared
- stats socket now support protocols other than UNIX
The next step is to remove the duplicate bind config parsing.
Unix permissions are per-bind configuration line and not per listener,
so let's concretize this in the way the config is stored. This avoids
some unneeded loops to set permissions on all listeners.
The access level is not part of the unix perms so it has been moved
away. Once we can use str2listener() to set all listener addresses,
we'll have a bind keyword parser for this one.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
We need to have the source and destination addresses in the connection.
They were lying in the stream interface so let's move them. The flags
SI_FL_FROM_SET and SI_FL_TO_SET have been moved as well.
It's worth noting that tcp_connect_server() almost does not use the
stream interface anymore except for a few flags.
It has been identified that once we detach the connection from the SI,
it will probably be needed to keep a copy of the server-side addresses
in the SI just for logging purposes. This has not been implemented right
now though.
Get rid of these confusing BF_* flags. Now channel naming should clearly
be used everywhere appropriate.
No code was changed, only a renaming was performed. The comments about
channel operations was updated.
Some parts of the sock_ops structure were only used by the stream
interface and have been moved into si_ops. Some of them were callbacks
to the stream interface from the connection and have been moved into
app_cp as they're the application seen from the connection (later,
health-checks will need to use them). The rest has moved to data_ops.
Normally at this point the connection could live without knowing about
stream interfaces at all.
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
At the moment, the struct is still embedded into the struct channel, but
all the functions have been updated to use struct buffer only when possible,
otherwise struct channel. Some functions would likely need to be splitted
between a buffer-layer primitive and a channel-layer function.
Later the buffer should become a pointer in the struct buffer, but doing so
requires a few changes to the buffer allocation calls.
This is a massive rename. We'll then split channel and buffer.
This change needs a lot of cleanups. At many locations, the parameter
or variable is still called "buf" which will become ambiguous. Also,
the "struct channel" is still defined in buffers.h.
This is used to enter values for stick tables. The most likely usage
is to set gpc0 for a specific IP address in order to block traffic
for abusers without having to reload. Since all data types are
supported, other usages are possible (eg: replace a users's assigned
server).
Right now we only support show/clear on a table. In order to introduce
the "set" keyword we need to get rid of the "show" boolean arg. There
is no functional change up to this commit.
It was not possible to kill remaining sessions from the admin interface,
which is annoying especially when switching to maintenance mode. Now it's
possible.
The listener struct is now aware of the socket layer to use upon accept().
At the moment, only sock_raw is supported so this patch should not change
anything.
The state and the private pointer are not specific to the applets, since SSL
will require exactly both of them. Move them to the connection layer now and
rename them. We also now ensure that both are NULL on first call.
We start to move everything needed to manage a connection to a special
entity "struct connection". We have the data layer operations and the
control operations there. We'll also have more info in the future such
as file descriptors and applet contexts, so that in the end it becomes
detachable from the stream interface, which will allow connections to
be reused between sessions.
For now on, we start with minimal changes.
David Touzeau reported that haproxy dies when a server is checked and is
used in a farm with only "option transparent" and no LB algo. This is
because the LB params are NULL, the functions should be checked before
being called.
The same bug is present in 1.4 so this patch must be backported.
Before it was possible to resize the buffers using global.tune.bufsize,
the trash has always been the size of a buffer by design. Unfortunately,
the recent buffer sizing at runtime forgot to adjust the trash, resulting
in it being too short for content rewriting if buffers were enlarged from
the default value.
The bug was encountered in 1.4 so the fix must be backported there.
Commit e164e7a removed get_src/get_dst setting in the stream interfaces but
forgot to set it in proto_tcp. Get the feature back because we need it for
logging, transparent mode, ACLs etc... We now rely on the stream interface
direction to know what syscall to use.
One benefit of doing it this way is that we don't use getsockopt() anymore
on outgoing stream interfaces nor on UNIX sockets.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
All keywords registered using a cfg_kw_list now make use of the new error reporting
framework. This allows easier and more precise error reporting without having to
deal with complex buffer allocation issues.
A number of important information were missing from the error captures, so
let's improve them. Now we also log source port, session flags, transaction
flags, message flags, pending output bytes, expected buffer wrapping position,
total bytes transferred, message chunk length, and message body length.
As such, the output format has slightly evolved and the source address moved
to the third line :
[08/May/2012:11:14:36.341] frontend echo (#1): invalid request
backend echo (#1), server <NONE> (#-1), event #1
src 127.0.0.1:40616, session #4, session flags 0x00000000
HTTP msg state 26, msg flags 0x00000000, tx flags 0x00000000
HTTP chunk len 0 bytes, HTTP body len 0 bytes
buffer flags 0x00909002, out 0 bytes, total 28 bytes
pending 28 bytes, wrapping at 8030, error at position 7:
00000 GET / /?t=20000 HTTP/1.1\r\n
00026 \r\n
[08/May/2012:11:13:13.426] backend echo (#1) : invalid response
frontend echo (#1), server local (#1), event #0
src 127.0.0.1:40615, session #1, session flags 0x0000044e
HTTP msg state 32, msg flags 0x0000000e, tx flags 0x08200000
HTTP chunk len 0 bytes, HTTP body len 20 bytes
buffer flags 0x00008002, out 81 bytes, total 92 bytes
pending 11 bytes, wrapping at 7949, error at position 9:
00000 Foo: bar\r\r\n
These operators are used regardless of the socket protocol family. Move
them to a "sock_ops" struct. ->read and ->write have been moved there too
as they have no reason to remain at the protocol level.
