htx_get_head_blk() is used at plenty of places, many of which are known
to be safe, but the function checks for the presence of a first block
and returns NULL if it doesn't exist. While it's properly used, it makes
compilers complain at -Os on stream.c and mux_fcgi.c because they probably
don't propagate variables far enough to see that there's no risk.
Let's add an unchecked version for these use cases.
Add ->inc_err_cnt new callback to qcc_app_ops struct which can
be called from xprt to increment the application level error code counters.
It take the application context as first parameter to be generic and support
new QUIC applications to come.
Add h3_stats.c module with counters for all the frame types and error codes.
Add new counters to count the number of dropped packet upon parsing error, lost
sent packets and the number of stateless reset packet sent.
Take the oppportunity of this patch to rename CONN_OPENINGS to QUIC_ST_HALF_OPEN_CONN
(total number of half open connections) and QUIC_ST_HDSHK_FAILS to QUIC_ST_HDSHK_FAIL.
This is becoming difficult to distinguish the default values for
transport parameters which come with the RFC from our implementation
default values when not set by configuration (tunable parameters).
Add a comment to distinguish them.
Prefix these default values by QUIC_TP_DFLT_ to distinguish them from
QUIC_DFLT_* value even if there are not numerous.
Furthermore ->max_udp_payload_size must be first initialized to
QUIC_TP_DFLT_MAX_UDP_PAYLOAD_SIZE especially for received value.
Add tunable "tune.quic.frontend.max_streams_bidi" setting for QUIC frontends
to set the "initial_max_streams_bidi" transport parameter.
Add some documentation for this new setting.
Add two tunable settings both for backends and frontends "max_idle_timeout"
QUIC transport parameter, "tune.quic.frontend.max-idle-timeout" and
"tune.quic.backend.max-idle-timeout" respectively.
cfg_parse_quic_time() has been implemented to parse a time value thanks
to parse_time_err(). It should be reused for any tunable time value to be
parsed.
Add the documentation for this tunable setting only for frontend.
Add quic_transport_params_dump() static inline function to do so for
a quic_transport_parameters struct as parameter.
We use the trace API do dump these transport parameters both
after they have been initialized (RX/local) or received (TX/remote).
Make the transport parameters be standlone as much as possible as
it consists only in encoding/decoding data into/from buffers.
Reduce the size of xprt_quic.h. Unfortunalety, I think we will
have to continue to include <xprt_quic-t.h> to use the trace API
into this module.
The only two places where it was used was to carefully preserve the
SE_FL_WILL_CONSUME flag (since others are irrelevant there and the
previous RXBLK* flags moved to the stconn). Now that the flag is
cleared by default there's no need to re-created a fresh new one
when replacing the descriptor, so we can eliminate that remaining
trick.
This flag was the only remaining one that was inverted as a blocking
condition, requiring special handling to preset it on sedesc allocation.
Let's flip it in its definition and accessors.
Function arguments and local variables called "cs" were renamed to "sc"
to avoid future confusion. Both the core functions and the ones in the
resolvers files were updated.
Function arguments and local variables called "cs" were renamed to "sc"
to avoid future confusion. The HTTP analyser and the backend functions
were all updated after being reviewed. Function stream_update_both_cs()
was renamed to stream_update_both_sc()
Function arguments and local variables called "cs" were renamed to "sc"
to avoid future confusion. The "nb_cs" stream-connector counter was
renamed to "nb_sc" and qc_attach_cs() was renamed to qc_attach_sc().
Function arguments and local variables called "cs" were renamed to "sc"
to avoid future confusion. The change is huge (~580 lines), so extreme
care was given not to change anything else.
The check struct had a "cs" field renamed to "sc", which also required
a tiny update to a few functions using it to distinguish a check from
a stream (log.c, payload.c, ssl_sample.c, tcp_sample.c, tcpcheck.c,
connection.c).
Function arguments and local variables called "cs" were renamed to "sc".
The presence of one "cs=" in the debugging traces was also turned to
"sc=" for consistency.
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
An equivalent applet_need_more_data() was added as well since that function
is mostly used from applet code. It makes it much clearer that the applet
is waiting for data from the stream layer.
These ones are essentially for the stream endpoint, let's give them a
name that matches the intent. Equivalent versions were provided in the
applet namespace to ease code legibility.
These ones were used exactly once and together, in sc_is_send_allowed().
No need to give them confusing names, instead let's just put the flags,
they're way more explicit, and drop the two functions.
This flag indicates the that stream endpoint is willing to consume output
data from the stream. Its new name makes this more explicit. The function
names will be updated accordingly, which will remove the disturbing "get"
everywhere.
The following flags are not at all related to the endpoint but to the
connector itself:
- SE_FL_RXBLK_ROOM
- SE_FL_RXBLK_BUFF
- SE_FL_RXBLK_CHAN
As such they have no business staying in the endpoint descriptor and
they must move to the stream connector. They've also been renamed
accordingly to better match what they correspond to (the same name
as the function that sets them).
The rare occurrences of cs_rx_blocked() were replaced by an explicit
test on the list of flags. The reason is that cs_rx_blocked() used to
preserve some tests that are not needed at certain places since already
known. For the same reason SE_FL_RXBLK_ANY wasn't converted. As such it
will later be possible to carefully review these few locations and
eliminate the unneeded flags from the tests. No particular function
was made to test them since they're explicit enough.
It now looks like ci_putchk() and friends could very well place the flag
themselves on the connector when they detect a buffer full condition, as
this would significantly simplify the high-level API. But all usages must
first be reviewed before this simplification can be done. For now it
remains done by applet_put*() instead.
It's more explicit this way. The cs_rx_endp_ready() function could be
removed so that the flag is directly tested. In the future it should
be inverted and the few places where it's set (or preserved via
SE_FL_APP_MASK) could be dropped.
At plenty of places we combine multiple flags checks to determine if we
can receive (endp_ready, rx_blocked, cf_shutr etc). Let's group them
under a single function that is meant to replace existing tests.
Some tests were only checking the rxblk flags at the connection level,
so for now they were not converted, this requires a bit of auditing
first, and probably a test to determine whether or not to check for
cf_shutr (e.g. there is none if no stream is present).
The analysis of cs_rx_endp_more() showed that the purpose is for a stream
endpoint to inform the connector that it's ready to deliver more data to
that one, and conversely cs_rx_endp_done() that it's done delivering data
so it should not be bothered again for this.
This was modified two ways:
- the operation is no longer performed on the connector but on the
endpoint so that there is no more doubt when reading applet code
about what this rx refers to; it's the endpoint that has more or
no more data.
- an applet implementation is also provided and mostly used from
applet code since it saves the caller from having to access the
endpoint descriptor.
It's visible that the flag ought to be inverted because some places
have to set it by default for no reason.
These functions are used by the application layer to disable or enable
reading at the stream connector's level when the input buffer failed to
be allocated (or was finally allocated). The new names makes things
clearer.
These functions were used by the channel to inform the lower layer
whether reading was acceptable or not. Usually this directly mimmicks
the CF_DONT_READ flag from the channel, which may be set when it's
desired not to buffer incoming data that will not be processed, or
that the buffer wants to be flushed before starting to read again,
or that bandwidth limiting might be enforced, etc. It's always a
policy reason, not a purely resource-based one.
The new name mor eclearly indicates that a stream connector cannot make
any more progress because it needs room in the channel buffer, or that
it may be unblocked because the buffer now has more room available. The
testing function is sc_waiting_room(). This is mostly used by applets.
Note that the flags will change soon.
This makes SE_FL_APPLET_NEED_CONN autonomous, in that we check for it
everywhere we have a relevant cs_rx_blocked(), so that the flag doesn't
need anymore to be covered by cs_rx_blocked(). Indeed, this flag doesn't
really translate a receive blocking condition but rather a refusal to
wake up an applet that is waiting for a connection to finish to setup.
This also ensures we will not risk to set it back on a new endpoint
after cs_reset_endp() via SE_FL_APP_MASK, because the flag being
specific to the endpoint only and not to the connector, we don't
want to preserve it when replacing the endpoint.
It's possible that cs_chk_rcv() could later be further simplified if
we can demonstrate that the two tests in it can be merged.
This flag is exclusively used when a front applet needs to wait for the
other side to connect (or fail to). Let's give it a more explicit name
and remove the ambiguous function that was used only once.
This also ensures we will not risk to set it back on a new endpoint
after cs_reset_endp() via SE_FL_APP_MASK, because the flag being
specific to the endpoint only and not to the connector, we don't
want to preserve it when replacing the endpoint.
This flag is no more needed, it was only set on shut read to be tested
by cs_rx_blocked() which is now properly tested for shutr as well. The
cs_rx_blk_shut() calls were removed. Interestingly it allowed to remove
a special case in the L7 retry code.
This also ensures we will not risk to set it back on a new endpoint
after cs_reset_endp() via SE_FL_APP_MASK.
