Samples fetches were relying on two flags SMP_CAP_REQ/SMP_CAP_RES to describe
whether they were compatible with requests rules or with response rules. This
was never reliable because we need a finer granularity (eg: an HTTP request
method needs to parse an HTTP request, and is available past this point).
Some fetches are also dependant on the context (eg: "hdr" uses request or
response depending where it's involved, causing some abiguity).
In order to solve this, we need to precisely indicate in fetches what they
use, and their users will have to compare with what they have.
So now we have a bunch of bits indicating where the sample is fetched in the
processing chain, with a few variants indicating for some of them if it is
permanent or volatile (eg: an HTTP status is stored into the transaction so
it is permanent, despite being caught in the response contents).
The fetches also have a second mask indicating their validity domain. This one
is computed from a conversion table at registration time, so there is no need
for doing it by hand. This validity domain consists in a bitmask with one bit
set for each usage point in the processing chain. Some provisions were made
for upcoming controls such as connection-based TCP rules which apply on top of
the connection layer but before instantiating the session.
Then everywhere a fetch is used, the bit for the control point is checked in
the fetch's validity domain, and it becomes possible to finely ensure that a
fetch will work or not.
Note that we need these two separate bitfields because some fetches are usable
both in request and response (eg: "hdr", "payload"). So the keyword will have
a "use" field made of a combination of several SMP_USE_* values, which will be
converted into a wider list of SMP_VAL_* flags.
The knowledge of permanent vs dynamic information has disappeared for now, as
it was never used. Later we'll probably reintroduce it differently when
dealing with variables. Its only use at the moment could have been to avoid
caching a dynamic rate measurement, but nothing is cached as of now.
Commit 2b0108ad accidently got rid of the ability to emit a "-" for
empty log fields. This can happen for captured request and response
cookies, as well as for fetches. Since we don't want to have this done
for headers however, we set the default log method when parsing the
format. It is still possible to force the desired mode using +M/-M.
utoa_pad() is directly fed into tmplog, which is checked for NULL.
First, when NULLs are possible, they should be put into a temp variable
in order to preserve tmplog, and second, this return value can never be
NULL because the value passed is tv_usec/1000 (between "0" and "999")
with a 4-char output. However better fix the check in case this code gets
improperly copy-pasted for another usage later.
Reported-by: Dinko Korunic <dkorunic@reflected.net>
When using log-format to log the result of sample fetch functions
which rely on the transport layer (eg: ssl*), we have no way to tell
the proxy not to release the connection before logs have caught the
necessary information. As a result, it happens that logging SSL fetch
functions sometimes doesn't return anything for example if the server
is not available and the connection is immediately aborted.
This issue will be fixed with the upcoming patches to finish handling
of sample fetches.
So for the moment, always mark the LW_XPRT flag on the proxy so that
when any fetch method is used, the proxy does not release the transport
layer too fast.
It happens that all of them call parse_logformat_line() which sets
proxy->to_log with a number of flags affecting the line format for
all three users. For example, having a unique-id specified disables
the default log-format since fe->to_log is tested when the session
is established.
Similarly, having "option logasap" will cause "+" to be inserted in
unique-id or headers referencing some of the fields depending on
LW_BYTES.
This patch first removes most of the dependency on fe->to_log whenever
possible. The first possible cleanup is to stop checking fe->to_log
for being null, considering that it always contains at least LW_INIT
when any such usage is made of the log-format!
Also, some checks are wrong. s->logs.logwait cannot be nulled by
"logwait &= ~LW_*" since LW_INIT is always there. This results in
getting the wrong log at the end of a request or session when a
unique-id or add-header is set, because logwait is still not null
but the log-format is not checked.
Further cleanups are required. Most LW_* flags should be removed or at
least replaced with what they really mean (eg: depend on client-side
connection, depend on server-side connection, etc...) and this should
only affect logging, not other mechanisms.
This patch fixes the default log-format and tries to limit interferences
between the log formats, but does not pretend to do more for the moment,
since it's the most visible breakage.
David BERARD reported that http-request add-header passes a \0 along
with the header field, which of course is not appropriate. This is
caused by build_logline() which sometimes returns the size with the
trailing zero and sometimes can return an empty string. Let's fix
this function instead of fixing the places where it's used.
The commit above improved error reporting during log parsing, but as
a result, some shared strings such as httplog_format are truncated
during parsing. This is observable upon startup because the second
proxy to use httplog emits a warning.
Let's have the logformat parser duplicate the string while parsing it.
Using %[expression] it becomes possible to make the log engine fetch
some samples from the request or the response and provide them in the
logs. Note that this feature is still limited, it does not yet allow
to apply converters, to limit the output length, nor to specify the
direction which should be fetched when a fetch function works in both
directions.
However it's quite convenient to log SSL information or to include some
information that are used in stick tables.
It is worth noting that this has been done in the generic log format
handler, which means that the same information may be used to build the
unique-id header and to pass the information to a backend server.
The log-format parser reached a limit making it hard to add new features.
It also suffers from a weak handling of certain incorrect corner cases,
for example "%{foo}" is emitted as a litteral while syntactically it's an
argument to no variable. Also the argument parser had to redo some of the
job with some cases causing minor memory leaks (eg: ignored args).
This work aims at improving the situation so that slightly better reporting
is possible and that it becomes possible to extend the log format. The code
has a few more states but looks significantly simpler. The parser is now
capable of reporting ignored arguments and truncated lines.
The <type> argument was checked against LOG_FMT_* but it was passed as
LF_* which are two independant enums. It happens that the 3 first entries
in these enums do match, but this broke some experimental changes which
required another state, so let's fix this now.
Some log tokens have evolved in a way that is not completely logical.
For example, frontend tokens sometimes begin with an 'f' and sometimes
with an 'F'. Same for backend and server.
So let's change a few cases without disrupting compatibility with existing
setups :
Bi => bi
Bp => bp
Ci => ci
Cp => cp
Fi => fi
Fp => fp
Si => si
Sp => sp
cc => CC
cs => CS
st => ST
The old ones are still supported but deprecated and will be unsupported by
the 1.5 release. However, a warning message is emitted when they're encounterd
and it indicates what token should be used to replace them.
When log format arguments are specified within braces with no '+' nor '-'
prefix, the NULL string is compared with known keywords causing a crash.
This only happens during parsing so it does not affect runtime processing.
Instead of storing a couple of (int, ptr) in the struct connection
and the struct session, we use a different method : we only store a
pointer to an integer which is stored inside the target object and
which contains a unique type identifier. That way, the pointer allows
us to retrieve the object type (by dereferencing it) and the object's
address (by computing the displacement in the target structure). The
NULL pointer always corresponds to OBJ_TYPE_NONE.
This reduces the size of the connection and session structs. It also
simplifies target assignment and compare.
In order to improve the generated code, we try to put the obj_type
element at the beginning of all the structs (listener, server, proxy,
si_applet), so that the original and target pointers are always equal.
A lot of code was touched by massive replaces, but the changes are not
that important.
We will need to be able to switch server connections on a session and
to keep idle connections. In order to achieve this, the preliminary
requirement is that the connections can survive the session and be
detached from them.
Right now they're still allocated at exactly the same place, so when
there is a session, there are always 2 connections. We could soon
improve on this by allocating the outgoing connection only during a
connect().
This current patch touches a lot of code and intentionally does not
change any functionnality. Performance tests show no regression (even
a very minor improvement). The doc has not yet been updated.
These two new log-format tags report the SSL protocol version (%sslv) and the
SSL ciphers (%sslc) used for the connection with the client. For instance, to
append these information just after the client's IP/port address information
on an HTTP log line, use the following configuration :
log-format %Ci:%Cp\ %sslv:%sslc\ [%t]\ %ft\ %b/%s\ %Tq/%Tw/%Tc/%Tr/%Tt\ %st\ %B\ %cc\ \ %cs\ %tsc\ %ac/%fc/%bc/%sc/%rc\ %sq/%bq\ %hr\ %hs\ %{+Q}r
It will report a line such as the following one :
Oct 12 20:47:30 haproxy[9643]: 127.0.0.1:43602 TLSv1:AES-SHA [12/Oct/2012:20:47:30.303] stick2~ stick2/s1 7/0/12/0/19 200 145 - - ---- 0/0/0/0/0 0/0 "GET /?t=0 HTTP/1.0"
Until now it was not possible to know from the logs whether the incoming
connection was made over SSL or not. In order to address this in the existing
log formats, a new log format %ft was introduced, to log the frontend's name
suffixed with its transport layer. The only transport layer in use right now
is '~' for SSL, so that existing log formats for non-SSL traffic are not
affected at all, and SSL log formats have the frontend's name suffixed with
'~'.
The TCP, HTTP and CLF log format now use %ft instead of %f. This does not
affect existing log formats which still make use of %f however.
We need to have the source and destination addresses in the connection.
They were lying in the stream interface so let's move them. The flags
SI_FL_FROM_SET and SI_FL_TO_SET have been moved as well.
It's worth noting that tcp_connect_server() almost does not use the
stream interface anymore except for a few flags.
It has been identified that once we detach the connection from the SI,
it will probably be needed to keep a copy of the server-side addresses
in the SI just for logging purposes. This has not been implemented right
now though.
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
This implements the feature discussed in the earlier thread of killing
connections on backup servers when a non-backup server comes back up. For
example, you can use this to route to a mysql master & slave and ensure
clients don't stay on the slave after the master goes from down->up. I've done
some minimal testing and it seems to work.
[WT: added session flag & doc, moved the killing after logging the server UP,
and ensured that the new server is really usable]
Cookies were mixed with many other options while they're not used as options.
Move them to a dedicated bitmask (ck_opts). This has released 7 flags in the
proxy options and leaves some room for new proxy flags.
Commit e164e7a removed get_src/get_dst setting in the stream interfaces but
forgot to set it in proto_tcp. Get the feature back because we need it for
logging, transparent mode, ACLs etc... We now rely on the stream interface
direction to know what syscall to use.
One benefit of doing it this way is that we don't use getsockopt() anymore
on outgoing stream interfaces nor on UNIX sockets.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
These callbacks are used to retrieve the source and destination address
of a socket. The address flags are not hold on the stream interface and
not on the session anymore. The addresses are collected when needed.
This still needs to be improved to store the IP and port separately so
that it is not needed to perform a getsockname() when only the IP address
is desired for outgoing traffic.
The Unique ID, is an ID generated with several informations. You can use
a log-format string to customize it, with the "unique-id-format" keyword,
and insert it in the request header, with the "unique-id-header" keyword.
%Fi: Frontend IP
%Fp: Frontend Port
%Si: Server IP
%Sp: Server Port
%Ts: Timestamp
%rt: HTTP request counter
%H: hostname
%pid: PID
+X: Hexadecimal represenation
The +X mode in logformat displays hexadecimal for the following flags
%Ci %Cp %Fi %Fp %Bi %Bp %Si %Sp %Ts %ct %pid
rename logformat_write_string() to lf_text()
Optimize size computation
* logformat functions now take a format linked list as argument
* build_logline() build a logline using a format linked list
* rename LOG_* by LOG_FMT_* in enum
* improve error management in build_logline()
Possible zero-pointer deference in sess_log().
Checks of return values in sess_log() fix the issue.
Fix bad computation in logformat_write_string().
This issue is 1.5-specific and was introduced just before 1.5-dev8.
No backport is needed.
__send_log(): the size of the buffer sent is wrong when the facility
is lower than 3 digits.
logformat_write_string(): computation of size is wrong
Note: this was introduced after 1.5-dev7, no backport needed.
Commit a1cc38 introduced a regression which was easy to trigger till ad4cd58
(snapshots 20120222 to 20120311 included). The bug was still present after
that but harder to trigger.
The bug is caused by the use of two distinct log buffers due to intermediary
changes. The issue happens when an HTTP request is logged just after a TCP
request during the same second and the HTTP request is too large for the buffer.
In this case, it happens that the HTTP request is logged into the TCP buffer
instead and that length controls can't detect anything.
Starting with bddd4f, the issue is still possible when logging too large an
HTTP request just after a send_log() call (typically a server status change).
We owe a big thanks to Sander Klein for testing several snapshots and more
specifically for taking significant risks in production by letting the buggy
version crash several times in order to provide an exploitable core ! The bug
could not have been found without this precious help. Thank you Sander !
This fix does not need to be backported, it did not affect any released version.
The difference could be seen when logging a request in HTTP mode with option
tcplog, as it would keep emitting 4 chars. Better use two distinct flags to
clear the confusion.
%Bi return the backend source IP
%Bp return the backend source port
Add a function pointer in logformat_type to do additional configuration
during the log-format variable parsing.
Merge http_sess_log() and tcp_sess_log() to sess_log() and move it to
log.c
A new field in logformat_type define if you can use a logformat
variable in TCP or HTTP mode.
doc: log-format in tcp mode
Note that due to the way log buffer allocation currently works, trying to
log an HTTP request without "option httplog" is still not possible. This
will change in the near future.
commit a1cc3811 introduced an undesirable \0\n ending on HTTP log messages. This
is because of an extra character count passed to __send_log() which causes the LF
to be appended past the \0. Some syslog daemons thus log an extra empty line. The
fix is obvious. Fix the function comments to remind what they expect on their input.
This is past 1.5-dev7 regression so there's no backport needed.
http_sess_log now use the logformat linked list to make the log
string, snprintf is not used for speed issue.
CLF mode also uses logformat.
NOTE: as of now, empty fields in CLF now are "" not "-" anymore.
parse_logformat_string: parse the string, detect the type: text,
separator or variable
parse_logformat_var: dectect variable name
parse_logformat_var_args: parse arguments and flags
add_to_logformat_list: add to the logformat linked list
send_log function is now splited in 3 functions
* hdr_log: generate the syslog header
* send_log: send a syslog message with a printf format string
* __send_log: send a syslog message
This patch settles the 2 loggers limitation.
Loggers are now stored in linked lists.
Using "global log", the global loggers list content is added at the end
of the current proxy list. Each "log" entries are added at the end of
the proxy list.
"no log" flush a logger list.
Stream interfaces used to distinguish between client and server addresses
because they were previously of different types (sockaddr_storage for the
client, sockaddr_in for the server). This is not the case anymore, and this
distinction is confusing at best and has caused a number of regressions to
be introduced in the process of converting everything to full-ipv6. We can
now remove this and have a much cleaner code.
We already had the ability to kill a connection, but it was only
for the checks. Now we can do this for any session, and for this we
add a specific flag "K" to the logs.
Many inet_ntop calls were partially right, which was hard to detect given
the complex combinations. Some of them were relying on the listener's proto
instead of the address itself, which could have been different when dealing
with an accept-proxy connection.
The new addr_to_str() function does the dirty job and returns the family, which
makes it particularly suited to calls from switch/case statements. A large number
of if/else statements were removed and the stats output could even be cleaned up
in the case of session dump.
As a side effect of doing this, the resulting code is smaller by almost 1kB.
All changed parts have been tested and provided expected output.
If a connection is closed by because the backend became unavailable
then log 'D' as the termination condition.
Signed-off-by: Simon Horman <horms@verge.net.au>
John Helliwell reported a runtime issue on Solaris since 1.5-dev5. Traces
show that connect() returns EINVAL, which means the socket length is not
appropriate for the family. Solaris does not like being called with sizeof
and needs the address family's size on sockaddr_storage.
The fix consists in adding a get_addr_len() function which returns the
socket's address length based on its family. Tests show that this works
for both IPv4 and IPv6 addresses.
Since we now have the copy of the target in the session, use it instead
of relying on the SI for it. The SI drops the target upon unregister()
so applets such as stats were logged as "NOSRV".
This one has been removed and is now totally superseded by ->target.
To get the server, one must use target_srv(&s->target) instead of
s->srv now.
The function ensures that non-server targets still return NULL.
With HTTP keep-alive, logging the right server name will be quite
complex because the assigned server will possibly change before we log.
Also, when we want to log accesses to an applet, it's not easy because
the applet becomes NULL again before logging.
The logged server's name is now taken from the target stored in the
stream interface. That way we can log an applet, a server name, or we
could even log a proxy or anything else if we wanted to. Ideally the
session should contain a desired target which is the one which should
be logged.
One of the requirements we have is to run multiple instances of haproxy on a
single host; this is so that we can split the responsibilities (and change
permissions) between product teams. An issue we ran up against is how we
would distinguish between the logs generated by each instance. The solution
we came up with (please let me know if there is a better way) is to override
the application tag written to syslog. We can then configure syslog to write
these to different files.
I have attached a patch adding a global option 'log-tag' to override the
default syslog tag 'haproxy' (actually defaults to argv[0]).
Haproxy does not include the hostname rather the IP of the machine in
the syslog headers it sends. Unfortunately this means that for each log
line rsyslog does a reverse dns on the client IP and in the case of
non-routable IPs one gets the public hostname not the internal one.
While this is valid according to RFC3164 as one might imagine this is
troublsome if you have some machines with public IPs, internal IPs, no
reverse DNS entries, etc and you want a standardized hostname based log
directory structure. The rfc says the preferred value is the hostname.
This patch adds a global "log-send-hostname" statement which accepts an
optional string to force the host name. If unset, the local host name
is used.
The conn_retries still lies in the session and its initialization depends
on the backend when it may not yet be known. Let's first move it to the
stream interface.
Romuald du Song reported a strange bug causing "option tcplog" to
unexpectedly use global log parameters if no log server was declared.
Eventhough it can be useful in some circumstances, it only hides
configuration bugs and can even cause traffic logs to be sent to
the wrong logger, since global settings are just for the process.
This has been fixed and a warning has been added for configurations
where tcplog or httplog are set without any logger. This fix must
be backported to 1.3.20, but not to 1.3.15.X in order not to risk
any regression on old configurations.
Some people are using haproxy in a shared environment where the
system logger by default sends alert and emerg messages to all
consoles, which happens when all servers go down on a backend for
instance. These people can not always change the system configuration
and would like to limit the outgoing messages level in order not to
disturb the local users.
The addition of an optional 4th field on the "log" line permits
exactly this. The minimal log level ensures that all outgoing logs
will have at least this level. So the logs are not filtered out,
just set to this level.
Some big traffic sites have trouble dealing with logs and tend to
disable them. Here are two new options to help cope with massive
logs.
- dontlog-normal only disables logging for 100% successful
connections, other ones will still be logged
- log-separate-errors will cause non-100% successful connections
to be logged at level "err" instead of level "info" so that a
properly configured syslog daemon can send them to a different
file for longer conservation.
It should be stated as a rule that a C file should never
include types/xxx.h when proto/xxx.h exists, as it gives
less exposure to declaration conflicts (one of which was
caught and fixed here) and it complicates the file headers
for nothing.
Only types/global.h, types/capture.h and types/polling.h
have been found to be valid includes from C files.
If the system date is set backwards while haproxy is running,
some scheduled events are delayed by the amount of time the
clock went backwards. This is particularly problematic on
systems where the date is set at boot, because it seldom
happens that health-checks do not get sent for a few hours.
Before switching to use clock_gettime() on systems which
provide it, we can at least ensure that the clock is not
going backwards and maintain two clocks : the "date" which
represents what the user wants to see (mostly for logs),
and an internal date stored in "now", used for scheduled
events.
This patch extends a little previously added functionality to also
count retries and redispatches for servers. Now it is possible to know
which server causes redispatches as it is not always the same that takes
most retries.
While working with the code I found that redistribute_pending() does not increment
srv->redispatches && be->redispatches. I don't know how to test it but
I think the fix is correct. If not I can withdraw it.
I also extended logs to show how many retries were done and if redispatching
was necessary ('+'). I'm using an additional session flag SN_REDISP to match
redispatched connections. I had to rearrange all defines in session.h to make
more room for it.
The documentation about logs was also fixed a little (sorry, english only),
as current version uses totally different format. BTW: examples are still
outdated, maybe next time...
Finally, I changed %d -> %u for retries/redispatches as those variables
are declared as unsigned.
Solaris, as well as many other unixes doesn't know about sun_len
for UNIX domain sockets. It does not honnor the __SOCKADDR_COMMON
macro either. After looking at MacOS-X man (which is the same as
BSD man), OpenBSD man, and examples on the net, it appears that
those which support sun_len do not actually use it, or at least
ignore it as long as it's zero. Since all the sockaddr structures
are zeroed prior to being filled, it causes no problem not to set
sun_len, and this fixes build on other platforms.
Another problem on Solaris was that the "sun" name is already
defined as a macro returning a number, so it was necessary to
rename it.
The code in haproxy-1.3.13.1 only supports syslogging to an internet
address. The attached patch:
- Adds support for syslogging to a UNIX domain socket (e.g., /dev/log).
If the address field begins with '/' (absolute file path), then
AF_UNIX is used to construct the socket. Otherwise, AF_INET is used.
- Achieves clean single-source build on both Mac OS X and Linux
(sockaddr_in.sin_len and sockaddr_un.sun_len field aren't always present).
For handling sendto() failures in send_log(), it appears that the existing
code is fine (no need to close/recreate socket) for both UDP and UNIX-domain
syslog server. So I left things alone (did not close/recreate socket).
Closing/recreating socket after each failure would also work, but would lead
to increased amount of unnecessary socket creation/destruction if syslog is
temporarily unavailable for some reason (especially for verbose loggers).
Please consider this patch for inclusion into the upstream haproxy codebase.
AIX does not know about MSG_DONTWAIT. Fortunately, nearly all sockets
are already set to O_NONBLOCK, so it's not even required to change the
code. It was only necessary to add this fcntl to the log socket which
lacked it. The MSG_DONTWAIT value has been defined to zero when unset
in order to make the code cleaner and more portable.
Also, on AIX, "hz" is defined, which causes a problem with one function
parameter in time.c. It's enough to rename the parameter there. Last,
fix a missing #include <string.h> in proxy.c.
localtime() was called with pointers to tv_sec, which is time_t on
some platforms and long on others. A problem was encountered on
Sparc64 under OpenBSD where tv_sec is long (64 bits) and time_t is
32 bits. Since this architecture is big-endian, it exhibited the
bug because localtime() always worked with the high part of the
value which is always zero. This problem was identified and debugged
by Thierry Fournier.
The correct solution is to pass the date by value and not by pointer,
through an intermediate function. The use of localtime_r() instead of
localtime() also made it possible to get rid of the first call to
localtime() since it does not need to allocate memory anymore.
The syslog UDP socket may receive data, which is not cool because those
data accumulate in the system buffers up to the receive socket buffer size.
To prevent this, we set the receive window to zero and try to shutdown(SHUT_RD)
the socket.
logs are handled better with dedicated functions. The HTTP implementation
moved to proto_http.c. It has been cleaned up a bit. Now a frontend with
option httplog and no log will not call the function anymore.
The fiprm and beprm were added to ease the transition between
a single listener mode to frontends+backends. They are no longer
needed and make the code a bit more complicated. Remove them.
Some session flags were clearly related to HTTP transactions.
A new 'flags' field has been added to http_txn, and the
associated flags moved to proto_http.h.
Some parts of HTTP processing were incorrectly called "request" while
they are messages or transactions. The following structure members
have changed :
http_msg.hdr_state => msg_state
http_msg.sor => som
http_req.req_state => removed
http_req => http_txn
If captures were configured in a TCP-only listener, and
the logs were enabled, the proxy could segfault when
trying to scan the capture buffer which was NULL. Such
an erroneous configuration will not be possible anymore
soon, but let's avoid the problem for now by detecting
the NULL condition.
The HTTP parser has been rewritten for better compliance to RFC2616.
The same parser is now usable for both requests and responses, and
it now supports HTTP/0.9 as well as multi-line headers. It has also
been improved for speed ; a typicial HTTP request is parsed in about
2 microseconds on a 1 GHz processor.
The monitor-uri check has been moved so that the requests are not
logged. The httpclose option now tries to change as little as
possible in the request, and does not affect the first header if
it is already set to 'close'. HTTP/0.9 requests are converted to
HTTP/1.0 before being forwarded.
Headers and request transformations are now distinct. The headers
list is updated after each insertion/removal/transformation. The
request is re-parsed and checked after each transformation. It is
not possible anymore to remove a request, and requests which lead
to invalid request lines are now rejected.
A struct http_req has been created to collect every information
related to an HTTP request being processed. Right now, it is
still in the struct session but the frontier is clear now.
The stats page could not tell the difference between a FE and a BE.
It has been revamped to indicate all relevant information. The font
is also slightly smaller in order for all the info to fit into small
screens. The data output path has been greatly simplified to use
string chunks.
The log format has been slightly updated to separately report the name
of the frontend and the name of the backend. The accept date has been
enhanced to report the millisecond. The number of remaining connections
has also been updated and their order reversed, to include the number
of connections on the frontend. The new log format is now :
- $1: IP:port
- $2: accept date in this format : [dd/mm/YYYY:HH:MM:SS.ttt]
- $3: frontend name
- $4: backend name '/' server name
- $5: req time '/' queue time '/' conn time '/' header time '/' total time
- $6: HTTP status code
- $7: number of bytes returned
- $8: captures (request)
- $9: captures (response)
- $10: completion flags
- $11: remaining conns on process '/' frontend '/' backend '/' server
- $12: srv queue size '/' backend queue size
- $13..: '"' full request '"'
To solve the logging maze, it has been decided that the frontend
and nothing else will define how a session will be logged. It might
change in the future but at least this choice allows all sort of
fantasies.
The logs have become a real mess. It is now very hard to tell which
frontend/backend will impose its configuration for the logs. This
needs a complete rework but at least it should work.
The nbconn attribute in the proxies was not relevant anymore because
a frontend A may use backend B and both of them must account for their
respective connections. For this reason, there now are two separate
counters for frontend and backend connections.
The stats page has been updated to reflect the backend, but a separate
line entry for the frontend with error counts would be good.
Note that as of now, beconn may be higher than maxconn, because maxconn
applies to the frontend, while beconn may be increased due to sessions
passed from another frontend.
There was a confusion about the way to find filters and backend
parameters from sessions. The chaining has been changed between
the session and the proxy.
Now, a session knows only two proxies : one frontend (->fe) and
one backend (->be). Each proxy has a link to the proxy providing
filters and to the proxy providing backend parameters (both self
by default).
The captures (cookies and headers) have been attached to the
frontend's filters for now.
The uri_auth and the statistics are attached to the backend's
filters so that the uri can depend on a hostname for instance.
The req_cap, hdr_state, hdr_idx, auth_hdr and req_line have been moved
to a dedicated hreq structure in the session. It makes is easier to
add HTTP-specific fields such as SOR (start of request) and EOF (end
of headers).
It also made it possible to fix two bugs introduced by last commit :
- end of headers not correctly detected
- hdr_idx not freed upon one specific error during session creation
When the backend side will be reworked, it should rely on a similar
structure.
The references to the proxy from the session have been turned into
Frontend (fe), Filters (fi) and Backend (be). This should ease the
migration to the L7 switching features. Next step will be to kill
the struct proxy and have 3 independant structs instead, each
referenced from entities called listener, frontend, filters and
backend.
Some of the tv_* functions are called very often. Passing their
arguments as registers is quite faster. This can be disabled
by setting CONFIG_HAP_DISABLE_REGPARM.
As suggested by Markus Elfring, a few "const char *" have replaced
some "char *" declarations where a function is not expected to
modify a value. It does not change the code but it helps detecting
coding errors.
It is now possible to tarpit connections based on regex matches.
The tarpit timeout is equal to the contimeout. A 500 server error
response is faked, and the logs show the status flags as "PT" which
indicate the connection has been tarpitted.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
