Do not allocate cs_endpoint for every QCS instances in qcs_new().
Instead, this is delayed to qc_attach_cs() function.
In effect, with H3 as app protocol, cs_endpoint will be allocated on
HEADERS parsing. Thus, no cs_endpoint is allocated for H3 unidirectional
streams which do not convey any HTTP data.
The wake handler detects if the frontend is closed. This can happen if
the proxy has been disabled individually or even on process soft-stop.
Before this patch, in this condition QCS instances were freed before
being detached from the cs_endpoint. This clearly violates the haproxy
connection architecture and cause a BUG_ON statement crash in cs_free().
To handle this properly, cs_endpoint is notified by setting RD_SH|WR_SH
on connection flags. The cs_endpoint will thus use the detach operation
which allows the QCS instance to be freed.
This code allows the soft-stop process to complete as soon as possible.
However, the client is not notified about the connection closing. It
should be done by emitting a H3 GOAWAY + CONNECTION_CLOSE. Sadly, this
is impossible at this stage because the listener sockets are closed so
the quic-conn cannot use it to emit new frames. At this stage the client
will most probably detect connection closing on its idle timeout
expiration.
Thus, to completely support proxy closing/soft-stop, important
architecture changes are required in QUIC socket management. This is
also linked with the reload feature.
In order to be able to check compatibility between muxes and transport
layers, we'll need a new flag to tag muxes that work on framed transport
layers like QUIC. Only QUIC has this flag now.
As specified by the RFC reception of different STREAM data for the same
offset should be treated with a CONNECTION_CLOSE with error
PROTOCOL_VIOLATION.
Use ncbuf API to detect this case : if add operation fails with
NCB_RET_DATA_REJ with add mode NCB_ADD_COMPARE.
Send a CONNECTION_CLOSE on reception of a STREAM frame for a STREAM id
exceeding the maximum value enforced. Only implemented for bidirectional
streams for the moment.
Send a CONNECTION_CLOSE if the peer emits more data than authorized by
our flow-control. This is implemented for both stream and connection
level.
Fields have been added in qcc/qcs structures to differentiate received
offsets for limit enforcing with consumed offsets for sending of
MAX_DATA/MAX_STREAM_DATA frames.
Define an API to easily set a CONNECTION_CLOSE. This will mainly be
useful for the MUX when an error is detected which require to close the
whole connection.
On the MUX side, a new flag is added when a CONNECTION_CLOSE has been
prepared. This will disable add future send operations.
Release the QCS RX buffer if emptied afer qcs_consume(). This improves
memory usage and avoids a QCS to keep an allocated buffer, particularly
when no data is received anymore. Buffer is automatically reallocated if
needed via qc_get_ncbuf().
qc_free_ncbuf() may now be used with a NCBUF_NULL buffer as parameter.
This is useful when using this function on a QCS with no allocated
buffer. This case was not reproduced for the moment, but it will soon
become more present as buffers will be released if emptied.
Also a call to offer_buffers() is added to conform with the dynamic
buffer management of haproxy.
This commit is similar to the previous one but deals with MAX_DATA for
connection-level data flow control. It uses the same function
qcc_consume_qcs() to update flow control level and generate a MAX_DATA
frame if needed.
Send MAX_STREAM_DATA frames when at least half of the allocated
flow-control has been demuxed, frame and cleared. This is necessary to
support QUIC STREAM with received data greater than a buffer.
Transcoders must use the new function qcc_consume_qcs() to empty the QCS
buffer. This will allow to monitor current flow-control level and
generate a MAX_STREAM_DATA frame if required. This frame will be emitted
via qc_io_cb().
Adjust the mechanism for MAX_STREAMS_BIDI emission. When a bidirectional
stream is removed, current flow-control level is checked. If needed, a
MAX_STREAMS_BIDI frame is generated and inserted in a new list in the
QCS instance. The new frames will be emitted at the start of qc_send().
This has no impact on the current MAX_STREAMS_BIDI behavior. However,
this mechanism is more flexible and will allow to implement quickly
MAX_STREAM_DATA/MAX_DATA emission.
Slightly change the interface for qcc_recv() between MUX and XPRT. The
MUX is now responsible to call qcc_decode_qcs(). This is cleaner as now
the XPRT does not have to deal with an extra QCS parameter and the MUX
will call qcc_decode_qcs() only if really needed.
This change is possible since there is no extra buffering for
out-of-order STREAM frames and the XPRT does not have to handle buffered
frames.
Previously, qc_io_cb() of mux-quic only dealt with TX. Add support for
RX in it. This is done through a new function qc_recv(qcc). It loops
over all QCS instances and call qcc_decode_qcs(qcs).
This has no impact from the quic-conn layer as qcc_decode_qcs(qcs) is
called directly. However, this allows to have a resume point when demux
is blocked on the upper layer HTX full buffer.
Note that for the moment, only RX for bidirectional streams is managed
in qc_io_cb(). Unidirectional streams use their own mechanism for both
TX/RX. It should be unified in the near future in a refactoring.
Rx has been simplified since the conversion of buffer to a ncbuf. The
old buffer can now be removed. The frms tree is also removed. It was
used previously to stored out-of-order received STREAM frames. Now the
MUX is able to buffer them directly into the ncbuf.
Add a ncbuf for data reception on qcs. Thanks to this, the MUX is able
to buffered all received frame directly into the buffer. Flow control
parameters will be used to ensure there is never an overflow.
This change will simplify Rx path with the future deletion of acked
frames tree previously used for frames out of order.
Fred & Amaury found that I messed up with qc_detach() in commit 4201ab791
("CLEANUP: muxes: make mux->attach/detach take a conn_stream endpoint"),
causing a segv in this case with endp->cs == NULL being passed to
__cs_mux(). It obviously ought to have been endp->target like in other
muxes.
No backport needed.
The mux ->detach() function currently takes a conn_stream. This causes
an awkward situation where the caller cs_detach_endp() has to partially
mark it as released but not completely so that ->detach() finds its
endpoint and context, and it cannot be done later since it's possible
that ->detach() deletes the endpoint. As such the endpoint link between
the conn_stream and the mux's stream is in a transient situation while
we'd like it to be clean so that the mux's ->detach() code can call any
regular function it wants that knows the regular semantics of the
relation between the CS and the endpoint.
A better approach consists in slightly modifying the detach() API to
better match the reality, which is that the endpoint is detached but
still alive and that it's the only part the function is interested in.
As such, this patch modifies the function to take an endpoint there,
and by analogy (or simplicity) does the same for ->attach(), even
though it looks less important there since we're always attaching an
endpoint to a conn_stream anyway. It is possible that in the future
the API could evolve to use more endpoints that provide a bit more
flexibility in the API, but at this point we don't need to go further.
At a few places the endpoint pointer was retrieved from the conn_stream
while it's safer and more long-term proof to take it from the qcs. Let's
just do that.
We rely on the largest ID which was used to open streams to know if the
stream we received STREAM frames for is closed or not. If closed, we return the
same status as the one for a STREAM frame which was a already received one for
on open stream.
This is required when the retransmitted frame types when the mux is released.
We add a counter for the number of streams which were opened or closed by the mux.
After the mux has been released, we can rely on this counter to know if the STREAM
frames are retransmitted ones or not.
If the request channel buffer is full, H3 demuxing must be interrupted
on the stream until some read is performed. This condition is reported
if the HTX stream buffer qcs.rx.app_buf is full.
In this case, qcs instance is marked with a new flag QC_SF_DEM_FULL.
This flag cause the H3 demuxing to be interrupted. It is cleared when
the HTX buffer is read by the conn-stream layer through rcv_buf
operation.
When the flag is cleared, the MUX tasklet is woken up. However, as MUX
iocb does not treat Rx for the moment, this is useless. It must be fix
to prevent possible freeze on POST transfers.
In practice, for the moment the HTX buffer is never full as the current
Rx code is limited by the quic-conn receive buffer size and the
incomplete flow-control implementation. So for now this patch is not
testable under the current conditions.
If the MUX cannot handle immediately nor buffer a STREAM frame, the
packet containing it must not be acknowledge. This is in conformance
with the RFC9000.
qcc_recv() return codes have been adjusted to differentiate an invalid
frame with an already fully received offset which must be acknowledged.
Modify qc_send_app_pkt() to distinguish the case where it sends new data
against the case where it sends old data during probing retransmissions.
We add <old_data> boolean parameter to this function to do so. The mux
never directly send old data when probing retransmissions are needed by
the connection.
We want to track the frames which have been duplicated during retransmissions so
that to avoid uselessly retransmitting frames which would already have been
acknowledged. ->origin new member is there to store the frame from which a copy
was done, ->reflist is a list to store the frames which are copies.
Also ensure all the frames are zeroed and that their ->reflist list member is
initialized.
Add QUIC_FL_TX_FRAME_ACKED flag definition to mark a TX frame as acknowledged.
Define 2 new callback for qcc_app_ops : attach and detach. They are
called when a qcs instance is respectively allocated and freed. If
implemented, they can allocate a custom context stored in the new
abstract field ctx of qcs.
For now, h3 and hq-interop does not use these new callbacks. They will
be soon implemented by the h3 layer to allocate a context used for
stateful demuxing.
This change is required to support the demuxing of H3 frames bigger than
a buffer.
Improve the reception for STREAM frames. In qcc_recv(), if the frame is
bigger than the remaining space in rx buffer, do not reject it wholly.
Instead, copy as much data as possible. The rest of the data is
buffered.
This is necessary to handle H3 frames bigger than a buffer. The H3 code
does not demux until the frame is complete or the buffer is full.
Without this, the transfer on payload larger than the Rx buffer can
rapidly freeze.
Add new qcs fields to count the sum of bytes received for each stream.
This is necessary to enforce flow-control for reception on the peer.
For the moment, the implementation is partial. No MAX_STREAM_DATA or
FLOW_CONTROL_ERROR are emitted. BUG_ON statements are here as a
remainder.
This means that for the moment we do not support POST payloads greater
that the initial max-stream-data announced (256k currently).
At least, we now ensure that we never buffer a frame which overflows the
flow-control limit : this ensures that the memory consumption per stream
should stay under control.
qcs and its field are not properly freed if the conn-stream allocation
fail in qcs_new(). Fix this by having a proper deinit code with a
dedicated label.
Comments were not properly edited since the splitting of functions for
stream emission. Also "payload" argument has been renamed to "in" as it
better reflects the function purpose.
Remove CS_EP_EOS set erroneously on qc_rcv_buf().
This fixes POST with abortonclose. Previously, request was preemptively
aborted by haproxy due to the incorrect EOS flag.
For the moment, EOS flag is not set anymore. It should be set to warn
about a premature close from the client.
Since previous patch
MINOR: mux-quic: split xfer and STREAM frames build
there is no way to report an error in qcs_xfer_data().
This should fix github issue #1669.
Do not initialize mux task timeout if timeout client is set to 0 in the
configuration. Check for the task before queuing it in qc_io_cb() or
qc_detach().
This fix a crash when timeout client is 0 or undefined.
Unsubscribe from lower layer on qc_release. This ensures that the lower
layer won't wake up a null tasklet after the MUX has been released and
may prevent a crash.
Complete qc_send function. After having processed each qcs emission, it
will now retry send on qcs where transfer can continue. This is useful
when qc_stream_desc buffer is full and there is still data present in
qcs buf.
To implement this, each eligible qcs is inserted in a new list
<qcc.send_retry_list>. This is done on send notification from the
transport layer through qcc_streams_sent_done(). Retry emission until
send_retry_list is empty or the transport layer cannot proceed more
data.
Several send operations are now called on two different places. Thus a
new _qc_send_qcs() function is defined to factorize the code.
This change should maximize the throughput during QUIC transfers.
MUX streams can now allocate multiple buffers for sending. quic-conn is
responsible to limit the total count of allowed allocated buffers. A
counter is stored in the new field <stream_buf_count>.
For the moment, the value is hardcoded to 30.
On stream buffer allocation failure, the qcc MUX is flagged with
QC_CF_CONN_FULL. The MUX is then woken up as soon as a buffer is freed,
most notably on ACK reception.
Complete the qc_stream_desc type to support multiple buffers on
emission. The main objective is to increase the transfer throughput.
The MUX is now able to transfer more data without having to wait ACKs.
To implement this feature, a new type qc_stream_buf is declared. it
encapsulates a buffer with a list element. New functions are defined to
retrieve the current buffer, release it or allocate a new one. Each
buffer is kept in the qc_stream_desc list until all of its data is
acknowledged.
On the MUX side, a qcs uses the current stream buffer to transfer data.
Once the buffer is full, it is released and a new one will be allocated
on a future qc_send() invocation.
Simplify the model qcs/qc_stream_desc. Each types has now its own tree
node, stored respectively in qcc and quic-conn trees. It is still
necessary to mark the stream as detached by the MUX once all data is
transfered to the lower layer.
This might improve slightly the performance on ACK management as now
only the lookup in quic-conn is necessary. On the other hand, memory
size of qcs structure is increased.
Regroup all type definitions and functions related to qc_stream_desc in
the source file src/quic_stream.c.
qc_stream_desc complexity will be increased with the development of Tx
multi-buffers. Having a dedicated module is useful to mix it with
pure transport/quic-conn code.
Split qcs_push_frame() in two functions.
The first one is qcs_xfer_data(). Its purpose is to transfer data from
qcs.tx.buf to qc_stream_desc buffer. The second function is named
qcs_build_stream_frm(). It generates a STREAM frame using qc_stream_desc
buffer as payload.
The trace events previously associated with qcs_push_frame() has also
been split in two to reflect the new code structure.
The purpose of this refactoring is first to better reflect how sending
is implemented. It will also simplify the implementation of Tx
multi-buffer per streams.
Implement qc_destroy. This callback is used to quickly release all MUX
resources.
session_free uses this callback. Currently, it can only be called if
there was an error during connection initialization. If not defined, the
process crashes.
For all muxes, the function responsible to release a mux is always called
with a defined mux. Thus there is no reason to test if it is defined or not.
Note the patch may seem huge but it is just because of indentation changes.
Several muxes (h2, fcgi, quic) don't support the protocol upgrade. For these
muxes, there is no reason to have code to support it. Thus in the destroy
callback, there is now a BUG_ON() and the release function is simplified
because the connection is always owned by the mux..
All old flags CS_FL_* are now moved in the endpoint scope and renamed
CS_EP_* accordingly. It is a systematic replacement. There is no true change
except for the health-check and the endpoint reset. Here it is a bit special
because the same conn-stream is reused. Thus, we must handle endpoint
allocation errors. To do so, cs_reset_endp() has been adapted.
Thanks to this last change, it will now be possible to simplify the
multiplexer and probably the applets too. A review must also be performed to
remove some flags in the channel or the stream-interface. The HTX will
probably be simplified too. Finally, there is now some place in the
conn-stream to move info from the stream-interface.
