Just like for the last commit, we need to fix the ACL argument parser so
that it lets the lower layer do the job of referencing unresolved arguments
and correctly report the type of missing arguments.
Some errors may be reported about missing mandatory arguments when some
sample fetch arguments are marked as mandatory and implicit (eg: proxy
names such as in table_cnt or be_conn).
In practice the argument parser already handles all the situations very
well, it's just that the sample fetch parser want to go beyond its role
and starts some controls that it should not do. Simply removing these
useless controls lets make_arg_list() create the correct argument types
when such types are encountered.
This regression was introduced by the recent use of sample_parse_expr()
in ACLs which makes use of its own argument parser, while previously
the arguments were parsed in the ACL function itself. No backport is
needed.
Doing so ensures that we're consistent between all the functions in the whole
chain. This is important so that we can extract the argument parsing from this
function.
This patch adds map manipulation commands to the socket interface.
add map <map> <key> <value>
Add the value <value> in the map <map>, at the entry corresponding to
the key <key>. This command does not verify if the entry already
exists.
clear map <map>
Remove entries from the map <map>
del map <map> <key>
Delete all the map entries corresponding to the <key> value in the map
<map>.
set map <map> <key> <value>
Modify the value corresponding to each key <key> in a map <map>. The
new value is <value>.
show map [<map>]
Dump info about map converters. Without argument, the list of all
available maps are returned. If a <map> is specified, is content is
dumped.
We'll need to pass patterns on the CLI for lookups. Till now there was no
need for a backslash, so it's still time to support them just like in the
config file.
With this patch, patterns can be compiled for two modes :
- match
- lookup
The match mode is used for example in ACLs or maps. The lookup mode
is used to lookup a key for pattern maintenance. For example, looking
up a network is different from looking up one address belonging to
this network.
A special case is made for regex. In lookup mode they return the input
regex string and do not compile the regex.
Now, the pat_parse_*() functions parses the incoming data. The input
"pattern" struct can be preallocated. If the parser needs to add some
buffers, it allocates memory.
The function pattern_register() runs the call to the parser, process
the key indexation and associate the "sample_storage" used by maps.
This patch remove the compatibility check from the input type and the
match method. Now, it checks if a casts from the input type to output
type exists and the pattern_exec_match() function apply casts before
each pattern matching.
This is used later for increasing the compability with incoming
sample types. When multiple compatible types are supported, one
is arbitrarily used (eg: UINT).
Applying inet_pton() to input contents is not reliable because the
function requires a zero-terminated string. While inet_pton() will
stop when contents do not match an IPv6 address anymore, it could
theorically read past the end of a buffer if the data to be converted
was at the end of a buffer (this cannot happen right now thanks to
the reserve at the end of the buffer). At least the conversion does
not work.
Fix this by using buf2ip6() instead, which copies the string into a
padded aread.
This bug came with recent commit b805f71 (MEDIUM: sample: let the
cast functions set their output type), no backport is needed.
There is a mix-up between input type of the data and input type of the
map file. This mix-up causes that all pattern matching function based
on "string" (reg, beg, end, ...) don't run.
This bug came with commit d5f624d (MEDIUM: sample: add the "map" converter),
no backport is needed.
The agent refrains from reading the server's response until the server
closes, but if the server waits for the client to close, the response
is never read. Let's try to fetch a whole line before deciding to wait
more.
The function stktable_init() will return 0 if create_pool() returns NULL. Since
the returned value of this function is ignored, HAProxy will crash if the pool
of stick table is NULL and stksess_new() is called to allocate a new stick
session. It is a better choice to check the returned value and make HAProxy exit
with alert message if any error is caught.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
The original codes are indented by spaces and not aligned with the former line.
It should be a convention to indent by tabs in HAProxy.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
We must not report incomplete data if the buffer is not full, otherwise
we can abort some processing on the stats socket when dealing with massive
amounts of commands.
There is a compiler warning after commit 1b6e75fa84 ("MEDIUM: haproxy-
systemd-wrapper: Use haproxy in same directory"):
src/haproxy-systemd-wrapper.c: In function ‘locate_haproxy’:
src/haproxy-systemd-wrapper.c:28:10: warning: ignoring return value of ‘readlink’, declared with attribute warn_unused_result [-Wunused-result]
Fix the compiler warning by checking the return value of readlink().
SSL and keep-alive will need to be able to fail on allocation errors,
and the stream interface did not allow to report such a cause. The flag
will then be "RC" as already documented.
This reduces its size which is not reused by anything else. However it
will significantly improve the debugger's output since we'll now get
real state values.
The default case had to be enabled in the parsers because gcc tries
to optimize the switch/case and noticed some values were missing from
the enums and emitted a warning.
Here again we had some oversized and misaligned entries. The method
and the status don't need 4 bytes each, and there was a hole after
the status that does not exist anymore. That's 8 additional bytes
saved from http_txn and as much for the session.
Also some fields were slightly moved to present better memory access
patterns resulting in a steady 0.5% performance increase.
When dumping a session, it can be useful to know what applet it is
connected to instead of having just the appctx pointer. We also
report st0/st1/st2 to help debugging.
Currently, all states, all status codes and a few constants used in
the peers are all prefixed with "PEER_SESSION_". It's confusing because
there is no way to know which one is a state, a status code or anything
else. Thus, let's rename them this way :
PEER_SESS_ST_* : states
PEER_SESS_SC_* : status codes
Additionally the states have been numbered from zero and contigously.
This will allow us not to have to deal with the stream interface
initialization anymore and to ease debugging using enums.
Some applet users don't need to initialize their applet, they just want
to route the traffic there just as if it were a server. Since applets
are now connected to from session.c, let's simply ensure that when
connecting, the applet in si->end matches the target, and allocate
one there if it's not already done. In case of error, we force the
status code to resource and connection so that it's clear that it
happens because of a memory shortage.
From now on, a call to stream_int_register_handler() causes a call
to si_alloc_appctx() and returns an initialized appctx for the
current stream interface. If one was previously allocated, it is
released. If the stream interface was attached to a connection, it
is released as well.
The appctx are allocated from the same pools as the connections, because
they're substantially smaller in size, and we can't have both a connection
and an appctx on an interface at any moment.
In case of memory shortage, the call may return NULL, which is already
handled by all consumers of stream_int_register_handler().
The field appctx was removed from the stream interface since we only
rely on the endpoint now. On 32-bit, the stream_interface size went down
from 108 to 44 bytes. On 64-bit, it went down from 144 to 64 bytes. This
represents a memory saving of 160 bytes per session.
It seems that a later improvement could be to move the call to
stream_int_register_handler() to session.c for most cases.
The task returned by stream_int_register_handler() is never used, however we
always need to access the appctx afterwards. So make it return the appctx
instead. We already plan for it to fail, which is the reason for the addition
of a few tests and the possibility for the HTTP analyser to return a status
code 500.
We're about to remove si->appctx, so first let's replace all occurrences
of its usage with a dynamic extract from si->end. A lot of code was changed
by search-n-replace, but the behaviour was intentionally not altered.
The code surrounding calls to stream_int_register_handler() was slightly
changed since we can only use si->end *after* the registration.
We used to have two very similar functions for sending a PROXY protocol
line header. The reason is that the default one relies on the stream
interface to retrieve the other end's address, while the "local" one
performs a local address lookup and sends that instead (used by health
checks).
Now that the send_proxy_ofs is stored in the connection and not the
stream interface, we can make the local_send_proxy rely on it and
support partial sends. This also simplifies the code by removing the
local_send_proxy function, making health checks use send_proxy_ofs,
resulting in the removal of the CO_FL_LOCAL_SPROXY flag, and the
associated test in the connection handler. The other flag,
CO_FL_SI_SEND_PROXY was renamed without the "SI" part so that it
is clear that it is not dedicated anymore to a usage with a stream
interface.
Till now the send_proxy_ofs field remained in the stream interface,
but since the dynamic allocation of the connection, it makes a lot
of sense to move that into the connection instead of the stream
interface, since it will not be statically allocated for each
session.
Also, it turns out that moving it to the connection fils an alignment
hole on 64 bit architectures so it does not consume more memory, and
removing it from the stream interface was an opportunity to correctly
reorder fields and reduce the stream interface's size from 160 to 144
bytes (-10%). This is 32 bytes saved per session.
The outgoing connection is now allocated dynamically upon the first attempt
to touch the connection's source or destination address. If this allocation
fails, we fail on SN_ERR_RESOURCE.
As we didn't use si->conn anymore, it was removed. The endpoints are released
upon session_free(), on the error path, and upon a new transaction. That way
we are able to carry the existing server's address across retries.
The stream interfaces are not initialized anymore before session_complete(),
so we could even think about allocating them dynamically as well, though
that would not provide much savings.
The session initialization now makes use of conn_new()/conn_free(). This
slightly simplifies the code and makes it more logical. The connection
initialization code is now shorter by about 120 bytes because it's done
at once, allowing the compiler to remove all redundant initializations.
The si_attach_applet() function now takes care of first detaching the
existing endpoint, and it is called from stream_int_register_handler(),
so we can safely remove the calls to si_release_endpoint() in the
application code around this call.
A call to si_detach() was made upon stream_int_unregister_handler() to
ensure we always free the allocated connection if one was allocated in
parallel to setting an applet (eg: detect HTTP proxy while proceeding
with stats maybe).
si_prepare_conn() is not appropriate in our case as it both initializes and
attaches the connection to the stream interface. Due to the asymmetry between
accept() and connect(), it causes some fields such as the control and transport
layers to be reinitialized.
Now that we can separately initialize these fields using conn_prepare(), let's
break this function to only attach the connection to the stream interface.
Also, by analogy, si_prepare_none() was renamed si_detach(), and
si_prepare_applet() was renamed si_attach_applet().
We don't want to assign the control nor transport layers anymore
at the same time as the data layer, because it prevents one from
keeping existing settings when reattaching a connection to an
existing stream interface.
Let's have conn_attach() replace conn_assign() for this purpose.
Thus, conn_prepare() + conn_attach() do exactly the same as the
previous conn_assign().
Now that we can assign conn->xprt regardless of the initialization state,
we can reintroduce conn_prepare() to set only the protocol, the transport
layer and initialize the transport layer's state.
The first function is used to (re)initialize a stream interface and
the second to force it into a known state. These are intended for
cleaning up the stream interface initialization code in session.c
and peers.c and avoiding future issues with missing initializations.
Currently the control and transport layers of a connection are supposed
to be initialized when their respective pointers are not NULL. This will
not work anymore when we plan to reuse connections, because there is an
asymmetry between the accept() side and the connect() side :
- on accept() side, the fd is set first, then the ctrl layer then the
transport layer ; upon error, they must be undone in the reverse order,
then the FD must be closed. The FD must not be deleted if the control
layer was not yet initialized ;
- on the connect() side, the fd is set last and there is no reliable way
to know if it has been initialized or not. In practice it's initialized
to -1 first but this is hackish and supposes that local FDs only will
be used forever. Also, there are even less solutions for keeping trace
of the transport layer's state.
Also it is possible to support delayed close() when something (eg: logs)
tracks some information requiring the transport and/or control layers,
making it even more difficult to clean them.
So the proposed solution is to add two flags to the connection :
- CO_FL_CTRL_READY is set when the control layer is initialized (fd_insert)
and cleared after it's released (fd_delete).
- CO_FL_XPRT_READY is set when the control layer is initialized (xprt->init)
and cleared after it's released (xprt->close).
The functions have been adapted to rely on this and not on the pointers
anymore. conn_xprt_close() was unused and dangerous : it did not close
the control layer (eg: the socket itself) but still marks the transport
layer as closed, preventing any future call to conn_full_close() from
finishing the job.
The problem comes from conn_full_close() in fact. It needs to close the
xprt and ctrl layers independantly. After that we're still having an issue :
we don't know based on ->ctrl alone whether the fd was registered or not.
For this we use the two new flags CO_FL_XPRT_READY and CO_FL_CTRL_READY. We
now rely on this and not on conn->xprt nor conn->ctrl anymore to decide what
remains to be done on the connection.
In order not to miss some flag assignments, we introduce conn_ctrl_init()
to initialize the control layer, register the fd using fd_insert() and set
the flag, and conn_ctrl_close() which unregisters the fd and removes the
flag, but only if the transport layer was closed.
Similarly, at the transport layer, conn_xprt_init() calls ->init and sets
the flag, while conn_xprt_close() checks the flag, calls ->close and clears
the flag, regardless xprt_ctx or xprt_st. This also ensures that the ->init
and the ->close functions are called only once each and in the correct order.
Note that conn_xprt_close() does nothing if the transport layer is still
tracked.
conn_full_close() now simply calls conn_xprt_close() then conn_full_close()
in turn, which do nothing if CO_FL_XPRT_TRACKED is set.
In order to handle the error path, we also provide conn_force_close() which
ignores CO_FL_XPRT_TRACKED and closes the transport and the control layers
in turns. All relevant instances of fd_delete() have been replaced with
conn_force_close(). Now we always know what state the connection is in and
we can expect to split its initialization.
