Having it in the ifdef complicates certain operations which require
additional ifdefs just to access a member which could remain zero in
non-ssl cases. Let's move it out, it will not even increase the
struct size on 64-bit machines due to alignment.
This one will be set by the transport layers which want to destroy
a bind_conf. It will typically be used by SSL to release certificates,
CAs and so on.
This one will be set by the transport layers which want to initialize
a bind_conf. It will typically be used by SSL to load certificates, CAs
and so on.
Historically, all listeners have a pointer to the frontend. But since
the introduction of SSL, we now have an intermediary layer called
bind_conf corresponding to a "bind" line. It makes no sense to have
the frontend on each listener given that it's the same for all
listeners belonging to a same bind_conf. Also certain parts like
SSL can only operate on bind_conf and need the frontend.
This patch fixes this by moving the frontend pointer from the listener
to the bind_conf. The extra indirection is quite cheap given and the
places were this is used are very scarce.
A mistake was made when the socket layer was cut into proto and
transport, the transport was attached to the listener while all
listeners in a single "bind" line always have exactly the same
transport. It doesn't seem obvious but this is the reason why there
are so many #ifdefs USE_OPENSSL in cfgparse : a lot of operations
have to be open-coded because cfgparse only manipulates bind_conf
and we don't have the information of the transport layer here.
Very little code makes use of the transport layer, mainly session
setup and log. These places can afford an extra pointer indirection
(the listener points to the bind_conf). This change is thus very small,
it saves a little bit of memory (8B per listener) and makes the code
more flexible.
This finishes to clean up the zlib-specific parts. It also unbreaks recent
commit b97c6fb ("CLEANUP: compression: use the build options list to report
the algos") which broke USE_ZLIB due to MAXWBITS not being defined anymore
in haproxy.c.
We replaced global.deviceatlas with global_deviceatlas since there's no need
to store all this into the global section. This removes the last #ifdefs,
and now the code is 100% self-contained in da.c. The file da.h was now
removed because it was only used to load dac.h, which is more easily
loaded directly from da.c. It provides another good example of how to
integrate code in the future without touching the core parts.
We replaced global._51degrees with global_51degrees since there's no need
to store all this into the global section. This removes the last #ifdefs,
and now the code is 100% self-contained in 51d.c. The file 51d.h was now
removed because it was only used to load 51Degrees.h, which is more easily
loaded from 51d.c. It provides a good example of how to integrate code in
the future without touching the core parts.
We replaced global.wurfl with global_wurfl since there's no need to store
all this into the global section. This removes the last #ifdefs, and now
the code is 100% self-contained in wurfl.c. It provides a good example of
how to integrate code in the future without touching the core parts.
The 3 device detection engines stop at the same place in deinit()
with the usual #ifdefs. Similar to the other functions we can have
some late deinitialization functions. These functions do not return
anything however so we have to use a different type.
There's a significant amount of late initialization calls which are
performed after the point where we exit in check mode. These calls
are used to allocate resource and perform certain slow operations.
Let's have a way to register some functions which need to be called
there instead of having this multitude of #ifdef in the init path.
Many extensions now report some build options to ease debugging, but
this is now being done at the expense of code maintainability. Let's
provide a registration function to do this so that we can start to
remove most of the #ifdefs from haproxy.c (18 currently just for a
single function).
This one now migrates to the general purpose cli.p0 for the ref pointer,
cli.i0 for the dump_all flag and cli.i1 for the dump_keys_index. A few
comments were added.
The applet.h file doesn't depend on openssl anymore. It's worth noting
that the previous dependency was accidental and only used to work because
all files including this one used to have openssl included prior to
loading this file.
This one now migrates to the general purpose cli.p0 for the proxy pointer,
cli.p1 for the server pointer, and cli.i0 for the proxy's instance if only
one has to be dumped.
Most of the keywords don't need to have their own entry in the appctx
union, they just need to reuse some generic pointers like we've been
used to do in the appctx with st{0,1,2}. This patch adds p0, p1, i0, i1
and initializes them to zero before calling the parser. This way some
of the simplest existing keywords will be able to disappear from the
union.
It's worth noting that this is an extension to what was initially
attempted via the "private" member that I removed a few patches ago by
not understanding how it was supposed to be used. Here the fact that
we share the same union will force us to be stricter: the code either
uses the general purpose variables or it uses its own fields but not
both.
The appctx storage became a real mess along the years. It now contains
mostly CLI-specific parts that share the same storage as the "cli" part
which in fact only contains the fields needed to pass an error message
to the caller, and it also has room a few other regular applets which
may become more and more common.
This first patch moves the parts around in the union so that all
standard applet parts are grouped together and the CLI-specific ones
are grouped together. It also adds a few comments to indicate what
certain parts are used for since it's sometimes a bit confusing.
The struct hlua size is 128 bytes. The size is the biggest of all the elements
of the union embedded in the appctx struct. With HTTP2, it is possible that this
appctx struct will be use many times for each connection, so the 128 bytes are
a little bit heavy for the global memory consomation.
This patch replace the embbeded hlua struct by a pointer and an associated memory
pool. Now, the memory for lua is allocated only if it is required.
[wt: the appctx is now down to 160 bytes]
Just like previous patch, this was the only other user of the "private"
field of the applet. It used to store a copy of the keyword's action.
Let's just put it into ->table->action and use it from there. It also
slightly simplifies the code by removing a few pointer to integer casts.
We have very few users of the appctx's private field which was introduced
prior to the split of the CLI. Unfortunately it was not removed after the
end. This commit simply introduces hlua_cli->fcn which is the pointer to
the Lua function that the Lua code used to store in this private pointer.
This problem is already detected here:
8dc7316a6f
Another case raises. Now HAProxy sends a final message (typically
with "http-request deny"). Once the the message is sent, the response
channel flags are not modified.
HAProxy executes a Lua sample-fecthes for building logs, and the
result is ignored because the response flag remains set to the value
HTTP_MSG_RPBEFORE. So the Lua function hlua_check_proto() want to
guarantee the valid state of the buffer and ask for aborting the
request.
The function check_proto() is not the good way to ensure request
consistency. The real question is not "Are the message valid ?", but
"Are the validity of message unchanged ?"
This patch memorize the parser state before entering int the Lua
code, and perform a check when it go out of the Lua code. If the parser
state change for down, the request is aborted because the HTTP message
is degraded.
This patch should be backported in version 1.6 and 1.7
When an entity tries to get a buffer, if it cannot be allocted, for example
because the number of buffers which may be allocated per process is limited,
this entity is added in a list (called <buffer_wq>) and wait for an available
buffer.
Historically, the <buffer_wq> list was logically attached to streams because it
were the only entities likely to be added in it. Now, applets can also be
waiting for a free buffer. And with filters, we could imagine to have more other
entities waiting for a buffer. So it make sense to have a generic list.
Anyway, with the current design there is a bug. When an applet failed to get a
buffer, it will wait. But we add the stream attached to the applet in
<buffer_wq>, instead of the applet itself. So when a buffer is available, we
wake up the stream and not the waiting applet. So, it is possible to have
waiting applets and never awakened.
So, now, <buffer_wq> is independant from streams. And we really add the waiting
entity in <buffer_wq>. To be generic, the entity is responsible to define the
callback used to awaken it.
In addition, applets will still request an input buffer when they become
active. But they will not be sleeped anymore if no buffer are available. So this
is the responsibility to the applet I/O handler to check if this buffer is
allocated or not. This way, an applet can decide if this buffer is required or
not and can do additional processing if not.
[wt: backport to 1.7 and 1.6]
A stream can be awakened for different reasons. During its processing, it can be
early stopped if no buffer is available. In this situation, the reason why the
stream was awakened is lost, because we rely on the task state, which is reset
after each processing loop.
In many cases, that's not a big deal. But it can be useful to accumulate the
task states if the stream processing is interrupted, especially if some filters
need to be called.
To be clearer, here is an simple example:
1) A stream is awakened with the reason TASK_WOKEN_MSG.
2) Because no buffer is available, the processing is interrupted, the stream
is back to sleep. And the task state is reset.
3) Some buffers become available, so the stream is awakened with the reason
TASK_WOKEN_RES. At this step, the previous reason (TASK_WOKEN_MSG) is lost.
Now, the task states are saved for a stream and reset only when the stream
processing is not interrupted. The correspoing bitfield represents the pending
events for a stream. And we use this one instead of the task state during the
stream processing.
Note that TASK_WOKEN_TIMER and TASK_WOKEN_RES are always removed because these
events are always handled during the stream processing.
[wt: backport to 1.7 and 1.6]
(http|tcp)-(request|response) action cannot take arguments from the
configuration file. Arguments are useful for executing the action with
a special context.
This patch adds the possibility of passing arguments to an action. It
runs exactly like sample fetches and other Lua wrappers.
Note that this patch implements a 'TODO'.
We used to have 3 types of counters with a huge overlap :
- listener counters : stats collected for each bind line
- proxy counters : union of the frontend and backend counters
- server counters : stats collected per server
It happens that quite a good part was common between listeners and
proxies due to the frontend counters being updated at the two locations,
and that similarly the server and proxy counters were overlapping and
being updated together.
This patch cleans this up to propose only two types of counters :
- fe_counters: used by frontends and listeners, related to
incoming connections activity
- be_counters: used by backends and servers, related to outgoing
connections activity
This allowed to remove some non-sensical counters from both parts. For
frontends, the following entries were removed :
cum_lbconn, last_sess, nbpend_max, failed_conns, failed_resp,
retries, redispatches, q_time, c_time, d_time, t_time
For backends, this ones was removed : intercepted_req.
While doing this it was discovered that we used to incorrectly report
intercepted_req for backends in the HTML stats, which was always zero
since it's never updated.
Also it revealed a few inconsistencies (which were not fixed as they
are harmless). For example, backends count connections (cum_conn)
instead of sessions while servers count sessions and not connections.
Over the long term, some extra cleanups may be performed by having
some counters update functions touching both the server and backend
at the same time, as well as both the frontend and listener, to
ensure that all sides have all their stats properly filled. The stats
dump will also be able to factor the dump functions by counter types.
When dealing with many proxies, it's hard to spot response errors because
all internet-facing frontends constantly receive attacks. This patch now
makes it possible to demand that only request or response errors are dumped
by appending "request" or "reponse" to the show errors command.
This way we don't have any more state specific to a given yieldable
command. The other commands should be easier to move as they only
involve a parser.
It really belongs to proto_http.c since it's a dump for HTTP request
and response errors. Note that it's possible that some parts do not
need to be exported anymore since it really is the only place where
errors are manipulated.
The table dump code was a horrible mess, with common parts interleaved
all the way to deal with the various actions (set/clear/show). A few
error messages were still incorrect, as the "set" operation did not
update them so they would still report "unknown action" (now fixed).
The action was now passed as a private argument to the CLI keyword
which itself is copied into the appctx private field. It's just an
int cast to a pointer.
Some minor issues were noticed while doing this, for example when dumping
an entry by key, if the key doesn't exist, nothing is printed, not even
the table's header. It's unclear whether this was intentional but it
doesn't really match what is done for data-based dumps. It was left
unchanged for now so that a later fix can be backported if needed.
Enum entries STAT_CLI_O_TAB, STAT_CLI_O_CLR and STAT_CLI_O_SET were
removed.
Move the "show info" command to stats.c using the CLI keyword API
to register it on the CLI. The stats_dump_info_to_buffer() function
is now static again. Note, we don't need proto_ssl anymore in cli.c.
Move the "show stat" command to stats.c using the CLI keyword API
to register it on the CLI. The stats_dump_stat_to_buffer() function
is now static again.
Move 'show sess' CLI functions to stream.c and use the cli keyword API
to register it on the CLI.
[wt: the choice of stream vs session makes sense because since 1.6 these
really are streams that we're dumping and not sessions anymore]
Move map and acl CLI functions to map.c and use the cli keyword API to
register actions on the CLI. Then remove the now unused individual
"add" and "del" keywords.
proto/dumpstats.h has been split in 4 files:
* proto/cli.h contains protypes for the CLI
* proto/stats.h contains prototypes for the stats
* types/cli.h contains definition for the CLI
* types/stats.h contains definition for the stats
uint16_t instead of u_int16_t
None ISO fields of struct tm are not present, but
by zeroyfing it, on GNU and BSD systems tm_gmtoff
field will be set.
[wt: moved the memset into each of the date functions]
