This basically reverts 3507d5d ("MEDIUM: proxy: only adjust the backend's
bind-process when already set"). It was needed during the transition to
the new process binding method but is causing trouble now because frontend
to backend binding is not properly propagated.
This fix should be backported to 1.5.
When an unknown encryption algorithm is used in userlists or the password is
not pasted correctly in the configuration, http authentication silently fails.
An initial check is now performed during the configuration parsing, in order to
verify that the encrypted password is supported. An unsupported password will
fail with a fatal error.
This patch should be backported to 1.4 and 1.5.
Add support for http-request track-sc, similar to what is done in
tcp-request for backends. A new act_prm field was added to HTTP
request rules to store the track params (table, counter). Just
like for TCP rules, the table is resolved while checking for
config validity. The code was mostly copied from the TCP code
with the exception that here we also count the HTTP request count
and rate by hand. Probably that something could be factored out in
the future.
It seems like tracking flags should be improved to mark each hook
which tracks a key so that we can have some check points where to
increase counters of the past if not done yet, a bit like is done
for TRACK_BACKEND.
With all the goodies supported by logformat, people find that the limit
of 1024 chars for log lines is too short. Some servers do not support
larger lines and can simply drop them, so changing the default value is
not always the best choice.
This patch takes a different approach. Log line length is specified per
log server on the "log" line, with a value between 80 and 65535. That
way it's possibly to satisfy all needs, even with some fat local servers
and small remote ones.
This patch remove all references of standard regex in haproxy. The last
remaining references are only in the regex.[ch] files.
In the file src/checks.c, the original function uses a "pmatch" array.
In fact this array is unused. This patch remove it.
Similar to previous patches, HTTP header captures are performed when
a TCP frontend switches to an HTTP backend, but are not possible to
report. So let's relax the check to explicitly allow them to be present
in TCP frontends.
When no static DH parameters are specified, this patch makes haproxy
use standardized (rfc 2409 / rfc 3526) DH parameters with prime lenghts
of 1024, 2048, 4096 or 8192 bits for DHE key exchange. The size of the
temporary/ephemeral DH key is computed as the minimum of the RSA/DSA server
key size and the value of a new option named tune.ssl.default-dh-param.
MySQL will in stop supporting pre-4.1 authentication packets in the future
and is already giving us a hard time regarding non-silencable warnings
which are logged on each health check. Warnings look like the following:
"[Warning] Client failed to provide its character set. 'latin1' will be used
as client character set."
This patch adds basic support for post-4.1 authentication by sending the proper
authentication packet with the character set, along with the QUIT command.
Now that it is possible to know whether a server is in forced maintenance
or inherits its maintenance status from another one, it is possible to
allow server tracking at more than one level. We still provide a loop
detection however.
Note that for the stats it's a bit trickier since we have to report the
check state which corresponds to the state of the server at the end of
the chain.
This change now involves a new flag SRV_ADMF_IMAINT to note that the
maintenance status of a server is inherited from another server. Thus,
we know at each server level in the chain if it's running, in forced
maintenance or in a maintenance status because it tracks another server,
or even in both states.
Disabling a server propagates this flag down to other servers. Enabling
a server flushes the flag down. A server becomes up again once both of
its flags are cleared.
Two new functions "srv_adm_set_maint()" and "srv_adm_set_ready()" are used to
manipulate this maintenance status. They're used by the CLI and the stats
page.
Now the stats page always says "MAINT" instead of "MAINT(via)" and it's
only the chk/down field which reports "via x/y" when the status is
inherited from another server, but it doesn't say it when a server was
forced into maintenance. The CSV output indicates "MAINT (via x/y)"
instead of only "MAINT(via)". This is the most accurate representation.
One important thing is that now entering/leaving maintenance for a
tracking server correctly follows the state of the tracked server.
Servers used to have 3 flags to store a state, now they have 4 states
instead. This avoids lots of confusion for the 4 remaining undefined
states.
The encoding from the previous to the new states can be represented
this way :
SRV_STF_RUNNING
| SRV_STF_GOINGDOWN
| | SRV_STF_WARMINGUP
| | |
0 x x SRV_ST_STOPPED
1 0 0 SRV_ST_RUNNING
1 0 1 SRV_ST_STARTING
1 1 x SRV_ST_STOPPING
Note that the case where all bits were set used to exist and was randomly
dealt with. For example, the task was not stopped, the throttle value was
still updated and reported in the stats and in the http_server_state header.
It was the same if the server was stopped by the agent or for maintenance.
It's worth noting that the internal function names are still quite confusing.
Now we introduce srv->admin and srv->prev_admin which are bitfields
containing one bit per source of administrative status (maintenance only
for now). For the sake of backwards compatibility we implement a single
source (ADMF_FMAINT) but the code already checks any source (ADMF_MAINT)
where the STF_MAINTAIN bit was previously checked. This will later allow
us to add ADMF_IMAINT for maintenance mode inherited from tracked servers.
Along doing these changes, it appeared that some places will need to be
revisited when implementing the inherited bit, this concerns all those
modifying the ADMF_FMAINT bit (enable/disable actions on the CLI or stats
page), and the checks to report "via" on the stats page. But currently
the code is harmless.
Till now, the server's state and flags were all saved as a single bit
field. It causes some difficulties because we'd like to have an enum
for the state and separate flags.
This commit starts by splitting them in two distinct fields. The first
one is srv->state (with its counter-part srv->prev_state) which are now
enums, but which still contain bits (SRV_STF_*).
The flags now lie in their own field (srv->flags).
The function srv_is_usable() was updated to use the enum as input, since
it already used to deal only with the state.
Note that currently, the maintenance mode is still in the state for
simplicity, but it must move as well.
Thomas Heil reported that previous commit 07fcaaa ("MINOR: fix a few
memory usage errors") make haproxy crash when req* rules are used. As
diagnosed by Cyril Bonté, this commit introduced a regression which
makes haproxy free the memory areas allocated for regex even when
they're going to be used, resulting in the crashes.
This patch does three things :
- undo the free() on the valid path
- add regfree() on the error path but only when regcomp() succeeds
- rename err_code to ret_code to avoid confusing the valid return
path with an error path.
John-Paul Bader reported a stupid regression in 1.5-dev25, we
forget to check that global.stats_fe is initialized before visiting
its sockets, resulting in a crash.
No backport is needed.
We used to have is_addr() in place to validate sometimes the existence
of an address, sometimes a valid IPv4 or IPv6 address. Replace them
carefully so that is_inet_addr() is used wherever we can only use an
IPv4/IPv6 address.
Till now a warning was emitted if the "stats bind-process" was not
specified when nbproc was greater than 1. Now we can be much finer
and only emit a warning when at least of the stats socket is bound
to more than one process at a time.
When a process list is specified on either the proxy or the bind lines,
the latter is refined to the intersection of the two. A warning is emitted
if no intersection is found, and the situation is fixed by either falling
back to the first process of the proxy or to all processes.
When a bind-process setting is present in a frontend or backend, we
now verify that the specified process range at least shares one common
process with those defined globally by nbproc. Then if the value is
set, it is reduced to the one enforced by nbproc.
A warning is emitted if process count does not match, and the fix is
done the following way :
- if a single process was specified in the range, it's remapped to
process #1
- if more than one process was specified, the binding is removed
and all processes are usable.
Note that since backends may inherit their settings from frontends,
depending on the declaration order, they may or may not be reported
as warnings.
Some consistency checks cannot be performed between frontends, backends
and peers at the moment because there is no way to check for intersection
between processes bound to some processes when the number of processes is
higher than the number of bits in a word.
So first, let's limit the number of processes to the machine's word size.
This means nbproc will be limited to 32 on 32-bit machines and 64 on 64-bit
machines. This is far more than enough considering that configs rarely go
above 16 processes due to scalability and management issues, so 32 or 64
should be fine.
This way we'll ensure we can always build a mask of all the processes a
section is bound to.
By default, a proxy's bind_proc is zero, meaning "bind to all processes".
It's only when not zero that its process list is restricted. So we don't
want the frontends to enforce the value on the backends when the backends
are still set to zero.
Now, haproxy exit an error saying:
Unable to initialize the lock for the shared SSL session cache. You can retry using
the global statement 'tune.ssl.force-private-cache' but it could increase the CPU
usage due to renegotiation if nbproc > 1.
Process shared mutex seems not supported on some OSs (FreeBSD).
This patch checks errors on mutex lock init to fallback
on a private session cache (per process cache) in error cases.
Commit fc6c032 ("MEDIUM: global: add support for CPU binding on Linux ("cpu-map")")
merged into 1.5-dev13 involves a useless test that clang reports as a warning. The
"low" variable cannot be negative here. Issue reported by Charles Carter.
The "block" rules are redundant with http-request rules because they
are performed immediately before and do exactly the same thing as
"http-request deny". Moreover, this duplication has led to a few
minor stats accounting issues fixed lately.
Instead of keeping the two rule sets, we now build a list of "block"
rules that we compile as "http-request block" and that we later insert
at the beginning of the "http-request" rules.
The only user-visible change is that in case of a parsing error, the
config parser will now report "http-request block rule" instead of
"blocking condition".
Finn Arne Gangstad suggested that we should have the ability to break
keep-alive when the target server has reached its maxconn and that a
number of connections are present in the queue. After some discussion
around his proposed patch, the following solution was suggested : have
a per-proxy setting to fix a limit to the number of queued connections
on a server after which we break keep-alive. This ensures that even in
high latency networks where keep-alive is beneficial, we try to find a
different server.
This patch is partially based on his original proposal and implements
this configurable threshold.
In version 1.3.4, we got the ability to split configuration parts between
frontends and backends. The stats was attached to the backend and a control
was made to ensure that it was used only in a listen or backend section, but
not in a frontend.
The documentation clearly says that the statement may only be used in the
backend.
But since that same version above, the defaults stats configuration is
only filled in the frontend part of the proxy and not in the backend's.
So a backend will not get stats which are enabled in a defaults section,
despite what the doc says. However, a frontend configured after a defaults
section will get stats and will not emit the warning!
There were many technical limitations in 1.3.4 making it impossible to
have the stats working both in the frontend and backend, but now this has
become a total mess.
It's common however to see people create a frontend with a perfectly
working stats configuration which only emits a warning stating that it
might not work, adding to the confusion. Most people workaround the tricky
behaviour by declaring a "listen" section with no server, which was the
recommended solution in 1.3 where it was even suggested to add a dispatch
address to avoid a warning.
So the right solution seems to do the following :
- ensure that the defaults section's settings apply to the backends,
as documented ;
- let the frontends work in order not to break existing setups relying
on the defaults section ;
- officially allow stats to be declared in frontends and remove the
warninng
This patch should probably not be backported since it's not certain that
1.4 is fully compatible with having stats in frontends and backends (which
was really made possible thanks to applets).
Till now there was no check against misplaced use-server rules, and
no warning was emitted, adding to the confusion. They're processed
just after the use_backend rules, or more exactly at the same level
but for the backend.
Recently, the http-request ruleset started to be used a lot and some
bug reports were caused by misplaced http-request rules because there
was no warning if they're after a redirect or use_backend rule. Let's
fix this now. http-request rules are just after the block rules.
Since it became possible to use log-format expressions in use_backend,
having a mandatory condition becomes annoying because configurations
are full of "if TRUE". Let's relax the check to accept no condition
like many other keywords (eg: redirect).
When compiled with USE_GETADDRINFO, make sure we use getaddrinfo(3) to
perform name lookups. On default dual-stack setups this will change the
behavior of using IPv6 first. Global configuration option
'nogetaddrinfo' can be used to revert to deprecated gethostbyname(3).
A few occurrences of sprintf() were causing harmless warnings on OpenBSD :
src/cfgparse.o(.text+0x259e): In function `cfg_parse_global':
src/cfgparse.c:1044: warning: sprintf() is often misused, please use snprintf()
These ones were easy to get rid of, so better do it.
The cfgparse.c file becomes huge, and a large part of it comes from the
server keyword parser. Since the configuration is a bit more modular now,
move this parser to server.c.
This patch also moves the check of the "server" keyword earlier in the
supported keywords list, resulting in a slightly faster config parsing
for configs with large numbers of servers (about 10%).
No functional change was made, only the code was moved.
We have a use case where we look up a customer ID in an HTTP header
and direct it to the corresponding server. This can easily be done
using ACLs and use_backend rules, but the configuration becomes
painful to maintain when the number of customers grows to a few
tens or even a several hundreds.
We realized it would be nice if we could make the use_backend
resolve its name at run time instead of config parsing time, and
use a similar expression as http-request add-header to decide on
the proper backend to use. This permits the use of prefixes or
even complex names in backend expressions. If no name matches,
then the default backend is used. Doing so allowed us to get rid
of all the use_backend rules.
Since there are some config checks on the use_backend rules to see
if the referenced backend exists, we want to keep them to detect
config errors in normal config. So this patch does not modify the
default behaviour and proceeds this way :
- if the backend name in the use_backend directive parses as a log
format rule, it's used as-is and is resolved at run time ;
- otherwise it's a static name which must be valid at config time.
There was the possibility of doing this with the use-server directive
instead of use_backend, but it seems like use_backend is more suited
to this task, as it can be used for other purposes. For example, it
becomes easy to serve a customer-specific proxy.pac file based on the
customer ID by abusing the errorfile primitive :
use_backend bk_cust_%[hdr(X-Cust-Id)] if { hdr(X-Cust-Id) -m found }
default_backend bk_err_404
backend bk_cust_1
errorfile 200 /etc/haproxy/static/proxy.pac.cust1
Signed-off-by: Bertrand Jacquin <bjacquin@exosec.fr>
This patch permit to register new sections in the haproxy's
configuration file. This run like all the "keyword" registration, it is
used during the haproxy initialization, typically with the
"__attribute__((constructor))" functions.
The function str2net runs DNS resolution if valid ip cannot be parsed.
The DNS function used is the standard function of the libc and it
performs asynchronous request.
The asynchronous request is not compatible with the haproxy
archictecture.
str2net() is used during the runtime throught the "socket".
This patch remove the DNS resolution during the runtime.
This patch remove the limit of 32 groups. It also permit to use standard
"pat_parse_str()" function in place of "pat_parse_strcat()". The
"pat_parse_strcat()" is no longer used and its removed. Before this
patch, the groups are stored in a bitfield, now they are stored in a
list of strings. The matching is slower, but the number of groups is
low and generally the list of allowed groups is short.
The fetch function "smp_fetch_http_auth_grp()" used with the name
"http_auth_group" return valid username. It can be used as string for
displaying the username or with the acl "http_auth_group" for checking
the group of the user.
Maybe the names of the ACL and fetch methods are no longer suitable, but
I keep the current names for conserving the compatibility with existing
configurations.
The function "userlist_postinit()" is created from verification code
stored in the big function "check_config_validity()". The code is
adapted to the new authentication storage system and it is moved in the
"src/auth.c" file. This function is used to check the validity of the
users declared in groups and to check the validity of groups declared
on the "user" entries.
This resolve function is executed before the check of all proxy because
many acl needs solved users and groups.
The binary samples are sometimes copied as is into http headers.
A sample can contain bytes unallowed by the http rfc concerning
header content, for example if it was extracted from binary data.
The resulting http request can thus be invalid.
This issue does not yet happen because haproxy currently (mistakenly)
hex-encodes binary data, so it is not really possible to retrieve
invalid HTTP chars.
The solution consists in hex-encoding all non-printable chars prefixed
by a '%' sign.
No backport is needed since existing code is not affected yet.
cfg_parse_listen() currently checks for duplicated proxy names.
Now that we have a tree for this, we can use it.
The config load time was further reduced by 1.6, which is now
about 4.5 times faster than what it was without the trees.
In fact it was the last CPU-intensive processing involving proxy
names. Now the only remaining point is the automatic fullconn
computation which can be bypassed by having a fullconn in the
defaults section, reducing the load time by another 10x.
Large configurations can take time to parse when thousands of backends
are in use. Let's store all the proxies in trees.
findproxy_mode() has been modified to use the tree for lookups, which
has divided the parsing time by about 2.5. But many lookups are still
present at many places and need to be dealt with.
Disabled backends don't have their symbols resolved. We must not initialize
their peers section since they're not valid and instead still contain the
section's name.
There are other places where such unions are still in use, and other similar
errors might still happen. Ideally we should get rid of all of them in the
quite sensible config stage.
Commits e0d1bfb ("[MINOR] Allow shutdown of sessions when a server
becomes unavailable") and eb2c24a ("MINOR: checks: add on-marked-up
option") mentionned that the directive was supported in default-server
but while it can be stated there, it's ignored because the config value
is not copied from the default server upon creation of a new server.
Moving the statement to the "server" lines works fine though. Thanks
to Baptiste Assmann for reporting and diagnosing this bug.
These features were introduced in 1.5-dev6 and 1.5-dev10 respectively,
so no backport is needed.
Cyril Bonté reported that despite commit 0dbbf317 which attempted
to fix the crash when a peers section has no name, we still get a
segfault after the error message when parsing the peers. The reason
is that the returned error code is ERR_FATAL and not ERR_ABORT, so
the parsing continues while the section was not initialized.
This is 1.5-specific, no backport is needed.
The ability to globally override the default client and server cipher
suites has been requested multiple times since the introduction of SSL.
This commit adds two new keywords to the global section for this :
- ssl-default-bind-ciphers
- ssl-default-server-ciphers
It is still possible to preset them at build time by setting the macros
LISTEN_DEFAULT_CIPHERS and CONNECT_DEFAULT_CIPHERS.
The new tune.idletimer value allows one to set a different value for
idle stream detection. The default value remains set to one second.
It is possible to disable it using zero, and to change the default
value at build time using DEFAULT_IDLE_TIMER.
A new tcp-check rule type: connect.
It allows HAProxy to test applications which stand on multiple ports or
multiple applications load-balanced through the same backend.
At the very beginning of haproxy, there was "option httpclose" to make
haproxy add a "Connection: close" header in both directions to invite
both sides to agree on closing the connection. It did not work with some
rare products, so "option forceclose" was added to do the same and actively
close the connection. Then client-side keep-alive was supported, so option
http-server-close was introduced. Now we have keep-alive with a fourth
option, not to mention the implicit tunnel mode.
The connection configuration has become a total mess because all the
options above may be combined together, despite almost everyone thinking
they cancel each other, as judging from the common problem reports on the
mailing list. Unfortunately, re-reading the doc shows that it's not clear
at all that options may be combined, and the opposite seems more obvious
since they're compared. The most common issue is options being set in the
defaults section that are not negated in other sections, but are just
combined when the user expects them to be overloaded. The migration to
keep-alive by default will only make things worse.
So let's start to address the first problem. A transaction can only work in
5 modes today :
- tunnel : haproxy doesn't bother with what follows the first req/resp
- passive close : option http-close
- forced close : option forceclose
- server close : option http-server-close with keep-alive on the client side
- keep-alive : option http-keep-alive, end to end
All 16 combination for each section fall into one of these cases. Same for
the 256 combinations resulting from frontend+backend different modes.
With this patch, we're doing something slightly different, which will not
change anything for users with valid configs, and will only change the
behaviour for users with unsafe configs. The principle is that these options
may not combined anymore, and that the latest one always overrides all the
other ones, including those inherited from the defaults section. The "no
option xxx" statement is still supported to cancel one option and fall back
to the default one. It is mainly needed to ignore defaults sections (eg:
force the tunnel mode). The frontend+backend combinations have not changed.
So for examplen the following configuration used to put the connection
into forceclose :
defaults http
mode http
option httpclose
frontend foo.
option http-server-close
=> http-server-close+httpclose = forceclose before this patch! Now
the frontend's config replaces the defaults config and results in
the more expected http-server-close.
All 25 combinations of the 5 modes in (frontend,backend) have been
successfully tested.
In order to prepare for upcoming changes, a new "option http-tunnel" was
added. It currently only voids all other options, and has the lowest
precedence when mixed with another option in another frontend/backend.
If no CA file specified on a server line, the config parser will show an error.
Adds an cmdline option '-dV' to re-set verify 'none' as global default on
servers side (previous behavior).
Also adds 'ssl-server-verify' global statement to set global default to
'none' or 'required'.
WARNING: this changes the default verify mode from "none" to "required" on
the server side, and it *will* break insecure setups.
Just like the previous commit, we sometimes want to limit the rate of
incoming SSL connections. While it can be done for a frontend, it was
not possible for a whole process, which makes sense when multiple
processes are running on a system to server multiple customers.
The new global "maxsslrate" setting is usable to fix a limit on the
session rate going to the SSL frontends. The limits applies before
the SSL handshake and not after, so that it saves the SSL stack from
expensive key computations that would finally be aborted before being
accounted for.
The same setting may be changed at run time on the CLI using
"set rate-limit ssl-session global".
It's sometimes useful to be able to limit the connection rate on a machine
running many haproxy instances (eg: per customer) but it removes the ability
for that machine to defend itself against a DoS. Thus, better also provide a
limit on the session rate, which does not include the connections rejected by
"tcp-request connection" rules. This permits to have much higher limits on
the connection rate without having to raise the session rate limit to insane
values.
The limit can be changed on the CLI using "set rate-limit sessions global",
or in the global section using "maxsessrate".
A config where multiple servers have the same name in the same backend is
prone to a number of issues : logs are not really exploitable, stats get
really tricky and even harder to change, etc...
In fact, it can be safe to have the same name between multiple servers only
when their respective IDs are known and used. So now we detect this situation
and emit a warning for the first conflict detected per server if any of the
servers uses an automatic ID.
When the load balancing algorithm in use is not deterministic, and a previous
request was sent to a server to which haproxy still holds a connection, it is
sometimes desirable that subsequent requests on a same session go to the same
server as much as possible. Note that this is different from persistence, as
we only indicate a preference which haproxy tries to apply without any form
of warranty. The real use is for keep-alive connections sent to servers. When
this option is used, haproxy will try to reuse the same connection that is
attached to the server instead of rebalancing to another server, causing a
close of the connection. This can make sense for static file servers. It does
not make much sense to use this in combination with hashing algorithms.
This new option enables HTTP keep-alive processing on the connections.
It can be overwritten by http-server-close, httpclose and forceclose.
Right now full-chain keep-alive is not yet implemented, but we need
the option to work on it. The doc will come later.
If a server is disabled in configuration and another one tracks it,
this last one must not inherit the MAINT flag otherwise it needs to
be explicitly enabled afterwards. Just remove this to fix the issue.
Health checks can now be paused. This is the status they get when the
server is put into maintenance mode, which is more logical than relying
on the server's state at some places. It will be needed to allow agent
checks to run when health checks are disabled (currently not possible).
Having the check state partially stored in the server doesn't help.
Some functions such as srv_getinter() rely on the server being checked
to decide what check frequency to use, instead of relying on the check
being configured. So let's get rid of SRV_CHECKED and SRV_AGENT_CHECKED
and only use the check's states instead.
At the moment, health checks and agent checks are tied : no agent
check is emitted if no health check is enabled. Other parameters
are considered in the condition for letting checks run. It will
help us selectively enable checks (agent and regular checks) to be
know whether they're enabled/disabled and configured or not. Now
we can already emit an error when trying to enable an unconfigured
agent.
Server tracking uses the same "tracknext" list for servers tracking
another one and for the servers being tracked. This caused an issue
which was fixed by commit f39c71c ([CRITICAL] fix server state tracking:
it was O(n!) instead of O(n)), consisting in ensuring that a server is
being checked before walking down the list, so that we don't propagate
the up/down information via servers being part of the track chain.
But the root cause is the fact that all servers share the same list.
The correct solution consists in having a list head for the tracked
servers and a list of next tracking servers. This simplifies the
propagation logic, especially for the case where status changes might
be passed to individual servers via the CLI.
Doing so ensures that we're consistent between all the functions in the whole
chain. This is important so that we can extract the argument parsing from this
function.
The function stktable_init() will return 0 if create_pool() returns NULL. Since
the returned value of this function is ignored, HAProxy will crash if the pool
of stick table is NULL and stksess_new() is called to allocate a new stick
session. It is a better choice to check the returned value and make HAProxy exit
with alert message if any error is caught.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
The original codes are indented by spaces and not aligned with the former line.
It should be a convention to indent by tabs in HAProxy.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
This is a generic health check which can be used to match a
banner or send a request and analyse a server response.
It works in a send/expect ways and many exchange can be done between
HAProxy and a server to decide the server status, making HAProxy able to
speak the server's protocol.
It can send arbitrary regular or binary strings and match content as a
regular or binary string or a regex.
Signed-off-by: Baptiste Assmann <bedis9@gmail.com>
Since commit 4a74143 (MEDIUM: Paramatise functions over the check of a
server), the check type is inherited from the current proxy's check type
at the moment where the server is declared instead of when reviewing
server configs. This causes an issue where a health check is disabled
when the server is declared before the checks. In fact the server will
inherit the last known check type declared before the "server" line :
backend foo
# this server is not checked at all
server s1 1.1.1.1:80 check
option tcpchk
# this server is tcp-checked :
server s2 1.1.1.2:80 check
option httpchk
# this server is http-checked :
server s3 1.1.1.3:80 check
The fix consists in assigning the check type during the config review
phase where the config is stable. No backport is nedeed.
We handle "http-request redirect" with a log-format string now, but we
leave "redirect" unaffected.
Note that the control of the special "/" case is move from the runtime
execution to the configuration parsing. If the format rule list is
empty, the build_logline() function does nothing.
When parsing track-sc* actions in tcp-request rules, we now automatically
compute the track-sc identifier number using %d when displaying an error
message. But the ID has become wrong since we introduced sc0, we continue
to report id+1 in error messages causing some confusion.
No backport is needed.
Add a DRAIN sub-state for a server which
will be shown on the stats page instead of UP if
its effective weight is zero.
Also, log if a server enters or leaves the DRAIN state
as the result of an agent check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is achieved by moving rise and fall from struct server to struct check.
After this move the behaviour of the primary check, server->check is
unchanged. However, the secondary agent check, server->agent now has
independent rise and fall values each of which are set to 1.
The result is that receiving "fail", "stopped" or "down" just once from the
agent will mark the server as down. And receiving a weight just once will
allow the server to be marked up if its primary check is in good health.
This opens up the scope to allow the rise and fall values of the agent
check to be configurable, however this has not been implemented at this
stage.
Signed-off-by: Simon Horman <horms@verge.net.au>
Allow an auxiliary agent check to be run independently of the
regular a regular health check. This is enabled by the agent-check
server setting.
The agent-port, which specifies the TCP port to use for the agent's
connections, is required.
The agent-inter, which specifies the interval between agent checks and
timeout of agent checks, is optional. If not set the value for regular
checks is used.
e.g.
server web1_1 127.0.0.1:80 check agent-port 10000
If either the health or agent check determines that a server is down
then it is marked as being down, otherwise it is marked as being up.
An agent health check performed by opening a TCP socket and reading an
ASCII string. The string should have one of the following forms:
* An ASCII representation of an positive integer percentage.
e.g. "75%"
Values in this format will set the weight proportional to the initial
weight of a server as configured when haproxy starts.
* The string "drain".
This will cause the weight of a server to be set to 0, and thus it
will not accept any new connections other than those that are
accepted via persistence.
* The string "down", optionally followed by a description string.
Mark the server as down and log the description string as the reason.
* The string "stopped", optionally followed by a description string.
This currently has the same behaviour as "down".
* The string "fail", optionally followed by a description string.
This currently has the same behaviour as "down".
Signed-off-by: Simon Horman <horms@verge.net.au>
Remove option lb-agent-chk and thus the facility to configure
a stand-alone agent health check. This feature was added by
"MEDIUM: checks: Add agent health check". It will be replaced
by subsequent patches with a features to allow an agent check
to be run as either a secondary check, along with any of the existing
checks, or as part of an http check with the status returned
in an HTTP header.
This patch does not entirely revert "MEDIUM: checks: Add agent health
check". The infrastructure it provides to parse the results of an
agent health check remains and will be re-used by the planned features
that are mentioned above.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms@verge.net.au>
Paramatise the following functions over the check of a server
* set_server_down
* set_server_up
* srv_getinter
* server_status_printf
* set_server_check_status
* set_server_disabled
* set_server_enabled
Generally the server parameter of these functions has been removed.
Where it is still needed it is obtained using check->server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
By paramatising these functions they may act on each of the checks
without further significant modification.
Explanation of the SSP_O_HCHK portion of this change:
* Prior to this patch SSP_O_HCHK serves a single purpose which
is to tell server_status_printf() weather it should print
the details of the check of a server or not.
With the paramatisation that this patch adds there are two cases.
1) Printing the details of the check in which case a
valid check parameter is needed.
2) Not printing the details of the check in which case
the contents check parameter are unused.
In case 1) we could pass SSP_O_HCHK and a valid check and;
In case 2) we could pass !SSP_O_HCHK and any value for check
including NULL.
If NULL is used for case 2) then SSP_O_HCHK becomes supurfulous
and as NULL is used for case 2) SSP_O_HCHK has been removed.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
The split has been made by:
* Moving elements of struct server's check element that will
be shared by both checks into a new check_common element
of struct server.
* Moving the remaining elements to a new struct check and
making struct server's check element a struct check.
* Adding a server element to struct check, a back-pointer
to the server element it is a member of.
- At this time the server could be obtained using
container_of, however, this will not be so easy
once a second struct check element is added to struct server
to accommodate an agent health check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This function was designed for haproxy while testing other functions
in the past. Initially it was not planned to be used given the not
very interesting numbers it showed on real URL data : it is not as
smooth as the other ones. But later tests showed that the other ones
are extremely sensible to the server count and the type of input data,
especially DJB2 which must not be used on numeric input. So in fact
this function is still a generally average performer and it can make
sense to merge it in the end, as it can provide an alternative to
sdbm+avalanche or djb2+avalanche for consistent hashing or when hashing
on numeric data such as a source IP address or a visitor identifier in
a URL parameter.
Summary:
Avalanche is supported not as a native hashing choice, but a modifier
on the hashing function. Note that this means that possible configs
written after 1.5-dev4 using "hash-type avalanche" will get an informative
error instead. But as discussed on the mailing list it seems nobody ever
used it anyway, so let's fix it before the final 1.5 release.
The default values were selected for backward compatibility with previous
releases, as discussed on the mailing list, which means that the consistent
hashing will still apply the avalanche hash by default when no explicit
algorithm is specified.
Examples
(default) hash-type map-based
Map based hashing using sdbm without avalanche
(default) hash-type consistent
Consistent hashing using sdbm with avalanche
Additional Examples:
(a) hash-type map-based sdbm
Same as default for map-based above
(b) hash-type map-based sdbm avalanche
Map based hashing using sdbm with avalanche
(c) hash-type map-based djb2
Map based hashing using djb2 without avalanche
(d) hash-type map-based djb2 avalanche
Map based hashing using djb2 with avalanche
(e) hash-type consistent sdbm avalanche
Same as default for consistent above
(f) hash-type consistent sdbm
Consistent hashing using sdbm without avalanche
(g) hash-type consistent djb2
Consistent hashing using djb2 without avalanche
(h) hash-type consistent djb2 avalanche
Consistent hashing using djb2 with avalanche
Summary:
In testing at tumblr, we found that using djb2 hashing instead of the
default sdbm hashing resulted is better workload distribution to our backends.
This commit implements a change, that allows the user to specify the hash
function they want to use. It does not limit itself to consistent hashing
scenarios.
The supported hash functions are sdbm (default), and djb2.
For a discussion of the feature and analysis, see mailing list thread
"Consistent hashing alternative to sdbm" :
http://marc.info/?l=haproxy&m=138213693909219
Note: This change does NOT make changes to new features, for instance,
applying an avalance hashing always being performed before applying
consistent hashing.
Mathew Levett reported an issue which is a bit nasty and hard to track
down. RDP cookies contain both the IP and the port, and haproxy matches
them exactly. So if a server has no port specified (or a remapped port),
it will never match a port specified in a cookie. Better warn the user
when this is detected.
In preparation of more flexibility in the stick counters, make their
number configurable. It still defaults to 3 which is the minimum
accepted value. Changing the value alone is not sufficient to get
more counters, some bitfields still need to be updated and the TCP
actions need to be updated as well, but this update tries to be
easier, which is nice for experimentation purposes.
The max weight of server is 256 now, but SRV_UWGHT_MAX is still 255. As a result,
FWRR will not work well when server's weight is 256. The description is as below:
There are some macros related to server's weight in include/types/server.h:
#define SRV_UWGHT_RANGE 256
#define SRV_UWGHT_MAX (SRV_UWGHT_RANGE - 1)
#define SRV_EWGHT_MAX (SRV_UWGHT_MAX * BE_WEIGHT_SCALE)
Since weight of server can be reach to 256 and BE_WEIGHT_SCALE equals to 16,
the max eweight of server should be 256*16 = 4096, it will exceed SRV_EWGHT_MAX
which equals to SRV_UWGHT_MAX*BE_WEIGHT_SCALE = 255*16 = 4080. When a server
with weight 256 is insterted into FWRR tree during initialization, the key value
of this server should be SRV_EWGHT_MAX - s->eweight = 4080 - 4096 = -16 which
is closed to UINT_MAX in unsigned type, so the server with highest weight will
be not elected as the first server to process request.
In addition, it is a better choice to compare with SRV_UWGHT_MAX than a magic
number 256 while doing check for the weight. The max number of servers for
round-robin algorithm is also updated.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
It was a bit inconsistent to have gpc start at 0 and sc start at 1,
so make sc start at zero like gpc. No previous release was issued
with sc3 anyway, so no existing setup should be affected.
Some actions were clearly missing to process response headers. This
patch adds a new "http-response" ruleset which provides the following
actions :
- allow : stop evaluating http-response rules
- deny : stop and reject the response with a 502
- add-header : add a header in log-format mode
- set-header : set a header in log-format mode
We're often missin a third counter to track base, src and base+src at
the same time. Here we introduce track_sc3 to have this third counter.
It would be wise not to add much more counters because that slightly
increases the session size and processing time though the real issue
is more the declaration of the keywords in the code and in the doc.
By properly affecting the flags and values, it becomes easier to add
more tracked counters, for example for experimentation. It also slightly
reduces the code and the number of tests. No counters were added with
this patch.
This patch does not change the logic of the code, it only changes the
way OS-specific defines are tested.
At the moment the transparent proxy code heavily depends on Linux-specific
defines. This first patch introduces a new define "CONFIG_HAP_TRANSPARENT"
which is set every time the defines used by transparent proxy are present.
This also means that with an up-to-date libc, it should not be necessary
anymore to force CONFIG_HAP_LINUX_TPROXY during the build, as the flags
will automatically be detected.
The CTTPROXY flags still remain separate because this older API doesn't
work the same way.
A new line has been added in the version output for haproxy -vv to indicate
what transparent proxy support is available.
Source function will not work with the following line in default section:
source 0.0.0.0 usesrc clientip
even that related settings by iptables and ip rule have been set correctly.
But it can work well in backend setcion.
The reason is that the operation in line 1815 in cfgparse.c as below:
curproxy->conn_src.opts = defproxy.conn_src.opts & ~CO_SRC_TPROXY_MASK;
clears three low bits of conn_src.opts which stores the configuration of
'usesrc'. Without correct bits set, the source address function can not
work well. They should be copied to the backend proxy without being modified.
Since conn_src.tproxy_addr had not copied from defproxy to backend proxy
while initializing backend proxy, source function will not work well
with explicit source address set in default section either.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
Note: the bug was introduced in 1.5-dev16 with commit ef9a3605
Commit a4312fa2 merged into dev18 improved log-format management by
processing "log-format" and "unique-id-format" where they were declared,
so that the faulty args could be reported with their correct line numbers.
Unfortunately, the log-format parser considers the proxy mode (TCP/HTTP)
and now if the directive is set before the "mode" statement, it can be
rejected and report warnings.
So we really need to parse these directives at the end of a section at
least. Right now we do not have an "end of section" event, so we need
to store the file name and line number for each of these directives,
and take care of them at the end.
One of the benefits is that now the line numbers can be inherited from
the line passing "option httplog" even if it's in a defaults section.
Future improvements should be performed to report line numbers in every
log-format processed by the parser.
While ACL args were resolved after all the config was parsed, it was not the
case with sample fetch args because they're almost everywhere now.
The issue is that ACLs now solely rely on sample fetches, so their args
resolving doesn't work anymore. And many fetches involving a server, a
proxy or a userlist don't work at all.
The real issue is that at the bottom layers we have no information about
proxies, line numbers, even ACLs in order to report understandable errors,
and that at the top layers we have no visibility over the locations where
fetches are referenced (think log node).
After failing multiple unsatisfying solutions attempts, we now have a new
concept of args list. The principle is that every proxy has a list head
which contains a number of indications such as the config keyword, the
context where it's used, the file and line number, etc... and a list of
arguments. This list head is of the same type as the elements, so it
serves as a template for adding new elements. This way, it is filled from
top to bottom by the callers with the information they have (eg: line
numbers, ACL name, ...) and the lower layers just have to duplicate it and
add an element when they face an argument they cannot resolve yet.
Then at the end of the configuration parsing, a loop passes over each
proxy's list and resolves all the args in sequence. And this way there is
all necessary information to report verbose errors.
The first immediate benefit is that for the first time we got very precise
location of issues (arg number in a keyword in its context, ...). Second,
in order to do this we had to parse log-format and unique-id-format a bit
earlier, so that was a great opportunity for doing so when the directives
are encountered (unless it's a default section). This way, the recorded
line numbers for these args are the ones of the place where the log format
is declared, not the end of the file.
Userlists report slightly more information now. They're the only remaining
ones in the ACL resolving function.
The acl_expr struct used to hold a pointer to the ACL keyword. But since
we now have all the relevant pointers, we don't need that anymore, we just
need the pointer to the keyword as a string in order to return warnings
and error messages.
So let's change this in order to remove the dependency on the acl_keyword
struct from acl_expr.
During this change, acl_cond_kw_conflicts() used to return a pointer to an
ACL keyword but had to be changed to return a const char* for the same reason.
The ACLs now use the fetch's ->use and ->val to decide upon compatibility
between the place where they are used and where the information are fetched.
The code is capable of reporting warnings about very fine incompatibilities
between certain fetches and an exact usage location, so it is expected that
some new warnings will be emitted on some existing configurations.
Two degrees of detection are provided :
- detecting ACLs that never match
- detecting keywords that are ignored
All tests show that this seems to work well, though bugs are still possible.
Proxy's acl_requires was a copy of all bits taken from ACLs, but we'll
get rid of ACL flags and only rely on sample fetches soon. The proxy's
acl_requires was only used to allocate an HTTP context when needed, and
was even forced in HTTP mode. So better have a flag which exactly says
what it's supposed to be used for.
If a log-format involves some sample fetches that may not be present at
the logging instant, we can now report a warning.
Note that this is done both for log-format and for add-header and carefully
respects the original fetch keyword's capabilities.
Samples fetches were relying on two flags SMP_CAP_REQ/SMP_CAP_RES to describe
whether they were compatible with requests rules or with response rules. This
was never reliable because we need a finer granularity (eg: an HTTP request
method needs to parse an HTTP request, and is available past this point).
Some fetches are also dependant on the context (eg: "hdr" uses request or
response depending where it's involved, causing some abiguity).
In order to solve this, we need to precisely indicate in fetches what they
use, and their users will have to compare with what they have.
So now we have a bunch of bits indicating where the sample is fetched in the
processing chain, with a few variants indicating for some of them if it is
permanent or volatile (eg: an HTTP status is stored into the transaction so
it is permanent, despite being caught in the response contents).
The fetches also have a second mask indicating their validity domain. This one
is computed from a conversion table at registration time, so there is no need
for doing it by hand. This validity domain consists in a bitmask with one bit
set for each usage point in the processing chain. Some provisions were made
for upcoming controls such as connection-based TCP rules which apply on top of
the connection layer but before instantiating the session.
Then everywhere a fetch is used, the bit for the control point is checked in
the fetch's validity domain, and it becomes possible to finely ensure that a
fetch will work or not.
Note that we need these two separate bitfields because some fetches are usable
both in request and response (eg: "hdr", "payload"). So the keyword will have
a "use" field made of a combination of several SMP_USE_* values, which will be
converted into a wider list of SMP_VAL_* flags.
The knowledge of permanent vs dynamic information has disappeared for now, as
it was never used. Later we'll probably reintroduce it differently when
dealing with variables. Its only use at the moment could have been to avoid
caching a dynamic rate measurement, but nothing is cached as of now.
The check was made on "cond" instead of "rule->cond", so it never
emitted any warning since either the rule was NULL or it was set to
the last condition met.
This is 1.5-specific and the bug was introduced by commit 4baae248
in 1.5-dev17, so no backport is needed.
Using the address syntax "fd@<num>", a listener may inherit a file
descriptor that the caller process has already bound and passed as
this number. The fd's socket family is detected using getsockname(),
and the usual initialization is performed through the existing code
for that family, but the socket creation is skipped.
Whether the parent has performed the listen() call or not is not
important as this is detected.
For UNIX sockets, we immediately clear the path after preparing a
socket so that we never remove it in case an abort would happen due
to a late error during startup.
This change allows one to force the address family in any address parsed
by str2sa_range() by specifying it as a prefix followed by '@' then the
address. Currently supported address prefixes are 'ipv4@', 'ipv6@', 'unix@'.
This also helps forcing resolving for host names (when getaddrinfo is used),
and force the family of the empty address (eg: 'ipv4@' = 0.0.0.0 while
'ipv6@' = ::).
The main benefits is that unix sockets can now get a local name without
being forced to begin with a slash. This is useful during development as
it is no longer necessary to have stats socket sent to /tmp.
Several of the parsing functions made use of multiple errmsg/err_msg
variables which had to be freed, while there is already one in each
function that is freed upon exit. Adapt the code to use the existing
variable exclusively.
The 'source' and 'usesrc' statements now completely rely on str2sa_range() to
parse an address. A test is made to ensure that the address family supports
connect().
Now that str2sa_range() knows how to parse UNIX addresses, make str2listener()
use it. It simplifies the function. Next step consists in unifying the error
handling to further simplify the call.
Tests have been done and show that unix sockets are correctly handled, with
and without prefixes, both for global stats and normal "bind" statements.
We'll need str2sa_range() to support a prefix for unix sockets. Since
we don't always want to use it (eg: stats socket), let's not take it
unconditionally from global but let the caller pass it.
The "unix-bind prefix" feature was made for explicit "bind" statements. Since
the stats socket was changed to use str2listener(), it implicitly inherited
from this feature. But both are defined in the global section, and we don't
want them to be position-dependant.
So let's make str2listener() explicitly not apply the unix-bind prefix to the
global stats frontend.
This only affects 1.5-dev so it does not need any backport.
Add new tunable "tune.ssl.maxrecord".
Over SSL/TLS, the client can decipher the data only once it has received
a full record. With large records, it means that clients might have to
download up to 16kB of data before starting to process them. Limiting the
record size can improve page load times on browsers located over high
latency or low bandwidth networks. It is suggested to find optimal values
which fit into 1 or 2 TCP segments (generally 1448 bytes over Ethernet
with TCP timestamps enabled, or 1460 when timestamps are disabled), keeping
in mind that SSL/TLS add some overhead. Typical values of 1419 and 2859
gave good results during tests. Use "strace -e trace=write" to find the
best value.
This trick was first suggested by Mike Belshe :
http://www.belshe.com/2010/12/17/performance-and-the-tls-record-size/
Then requested again by Ilya Grigorik who provides some hints here :
http://ofps.oreilly.com/titles/9781449344764/_transport_layer_security_tls.html#ch04_00000101
When parsing the config, we now use str2sa_range() to detect when
ranges or port offsets were improperly used. Among the new checks
are "log", "source", "addr", "usesrc" which previously didn't check
for extra parameters.
Support a agent health check performed by opening a TCP socket to a
pre-defined port and reading an ASCII string. The string should have one of
the following forms:
* An ASCII representation of an positive integer percentage.
e.g. "75%"
Values in this format will set the weight proportional to the initial
weight of a server as configured when haproxy starts.
* The string "drain".
This will cause the weight of a server to be set to 0, and thus it will
not accept any new connections other than those that are accepted via
persistence.
* The string "down", optionally followed by a description string.
Mark the server as down and log the description string as the reason.
* The string "stopped", optionally followed by a description string.
This currently has the same behaviour as down (iii).
* The string "fail", optionally followed by a description string.
This currently has the same behaviour as down (iii).
A agent health check may be configured using "option lb-agent-chk".
The use of an alternate check-port, used to obtain agent heath check
information described above as opposed to the port of the service,
may be useful in conjunction with this option.
e.g.
option lb-agent-chk
server http1_1 10.0.0.10:80 check port 10000 weight 100
Signed-off-by: Simon Horman <horms@verge.net.au>
Commit 2b0108ad accidently got rid of the ability to emit a "-" for
empty log fields. This can happen for captured request and response
cookies, as well as for fetches. Since we don't want to have this done
for headers however, we set the default log method when parsing the
format. It is still possible to force the desired mode using +M/-M.
Commit 290e63aa moved the unix parameters out of the global stats socket
to the bind_conf struct. As such the stats admin level was also moved
overthere, but it remained in the stats global section where it was not
used, except by a nasty memcpy() used to initialize the ux struct in the
bind_conf with too large data. Fortunately, the extra data copied were
the previous level over the new level so it did not have any impact, but
it could have been worse.
This bug is 1.5 specific, no backport is needed.
Reported-by: Dinko Korunic <dkorunic@reflected.net>
logsrv->minlvl gets the numeric log level from the equivalent string.
Upon error, ->level was checked due to a wrong copy-paste. The effect
is that a wrong name will silently be ignored and due to minlvl=-1,
will act as if the option was not set.
No backport is needed, this is 1.5-specific.
Reported-by: Dinko Korunic <dkorunic@reflected.net>
An error caused by an invalid port does not cause the raddr string to
be freed. This is harmless at the moment since we exit, but may have
an impact later if we ever support hot config changes.
Reported-by: Dinko Korunic <dkorunic@reflected.net>
If a peers section contains several instances of the local peer name, only
the first one was considered and the next ones were silently ignored. This
can cause some trouble to debug such a configuration. Now the extra entries
are rejected with an error message indicating where the first occurrence was
found.
Due to a typo in the peers section lookup code, the last declared peers
section was used instead of the one matching the requested name. This bug
has been there since the very first commit on peers section (1.5-dev2).
It happens that all of them call parse_logformat_line() which sets
proxy->to_log with a number of flags affecting the line format for
all three users. For example, having a unique-id specified disables
the default log-format since fe->to_log is tested when the session
is established.
Similarly, having "option logasap" will cause "+" to be inserted in
unique-id or headers referencing some of the fields depending on
LW_BYTES.
This patch first removes most of the dependency on fe->to_log whenever
possible. The first possible cleanup is to stop checking fe->to_log
for being null, considering that it always contains at least LW_INIT
when any such usage is made of the log-format!
Also, some checks are wrong. s->logs.logwait cannot be nulled by
"logwait &= ~LW_*" since LW_INIT is always there. This results in
getting the wrong log at the end of a request or session when a
unique-id or add-header is set, because logwait is still not null
but the log-format is not checked.
Further cleanups are required. Most LW_* flags should be removed or at
least replaced with what they really mean (eg: depend on client-side
connection, depend on server-side connection, etc...) and this should
only affect logging, not other mechanisms.
This patch fixes the default log-format and tries to limit interferences
between the log formats, but does not pretend to do more for the moment,
since it's the most visible breakage.
These two new statements allow to pass information extracted from the request
to the server. It's particularly useful for passing SSL information to the
server, but may be used for various other purposes such as combining headers
together to emulate internal variables.
Until now it was only possible to use track-sc1/sc2 with "src" which
is the IPv4 source address. Now we can use track-sc1/sc2 with any fetch
as well as any transformation type. It works just like the "stick"
directive.
Samples are automatically converted to the correct types for the table.
Only "tcp-request content" rules may use L7 information, and such information
must already be present when the tracking is set up. For example it becomes
possible to track the IP address passed in the X-Forwarded-For header.
HTTP request processing now also considers tracking from backend rules
because we want to be able to update the counters even when the request
was already parsed and tracked.
Some more controls need to be performed (eg: samples do not distinguish
between L4 and L6).
Both servers and proxies share a common set of parameters for outgoing
connections, and since they're not stored in a similar structure, a lot
of code is duplicated in the connection setup, which is one sensible
area.
Let's first define a common struct for these settings and make use of it.
Next patches will de-duplicate code.
This change also fixes a build breakage that happens when USE_LINUX_TPROXY
is not set but USE_CTTPROXY is set, which seem to be very unlikely
considering that the issue was introduced almost 2 years ago an never
reported.
Recent commit 16a214 to move the maxaccept parameter to listeners didn't
set it on the peers' listeners, resulting in the value zero being used
there. This caused a busy loop for each peers section, because no incoming
connection could be accepted.
Thanks to Hervé Commowick for reporting this issue.
Some users need more than 64 characters to log large cookies. The limit
was set to 63 characters (and not 64 as previously documented). Now it
is possible to change this using the global "tune.http.cookielen" setting
if required.
New option 'maxcompcpuusage' in global section.
Sets the maximum CPU usage HAProxy can reach before stopping the
compression for new requests or decreasing the compression level of
current requests. It works like 'maxcomprate' but with the Idle.
