If a client does a sudden dirty close (CL_STCLOSE) during a server
connect turn-around, then the number of server connections is
decremented twice. This causes huge problems on the affected
server because when its connection number becomes negative, it
overflows and prevents the server from accepting new connections
due to an apparent saturation.
The fix consists in not decrementing the counter if the server is
in a turn-around state.
Due to the way the stats socket work, it was not possible to
maintain the information related to the command entered, so
after filling a whole buffer, the request was lost and it was
considered that there was nothing to write anymore.
The major reason was that some flags were passed directly
during the first call to stats_dump_raw() instead of being
stored persistently in the session.
To definitely fix this problem, flags were added to the stats
member of the session structure.
A second problem appeared. When the stats were produced, a first
call to client_retnclose() was performed, then one or multiple
subsequent calls to buffer_write_chunks() were done. But once the
stats buffer was full and a reschedule operated, the buffer was
flushed, the write flag cleared from the buffer and nothing was
done to re-arm it.
For this reason, a check was added in the proto_uxst_stats()
function in order to re-call the client FSM when data were added
by stats_dump_raw(). Finally, the whole unix stats dump FSM was
rewritten to avoid all the magics it depended on. It is now
simpler and looks more like the HTTP one.
The new "leastconn" LB algorithm selects the server which has the
least established or pending connections. The weights are considered,
so that a server with a weight of 20 will get twice as many connections
as the server with a weight of 10.
The algorithm respects the minconn/maxconn settings, as well as the
slowstart since it is a dynamic algorithm. It also correctly supports
backup servers (one and all).
It is generally suited for protocols with long sessions (such as remote
terminals and databases), as it will ensure that upon restart, a server
with no connection will take all new ones until its load is balanced
with others.
A test configuration has been added in order to ease regression testing.
Commit 3168223a7b33a1d5aad1e11b8f2ad917645d7f27 broke option
"allbackups" in roundrobin mode due to an erroneous structure
member replacement in backend.c. The PR_O_USE_ALL_BK flag was
not tested in the right member anymore.
This bug uncoverred another one, by which all backup servers would
be used whatever the option's value, if all of them had been seen
as simultaneously failed at one moment.
This patch fixes the two stupid errors. Correctness has been tested
using the test-fwrr.cfg config example.
Matt Farnsworth reported a memory leak in str2sun() in case a too large
socket path is passed. The bug is very minor because it only happens
once during config parsing, but has to be fixed nevertheless. The patch
Matt provided could even be improved by completely removing the useless
strdup() in this function.
Currently there is a ~16KB limit for a data size passed via unix socket.
It is caused by a trivial bug ttat is going to fixed soon, however
in most cases there is no need to dump a full stats.
This patch makes possible to select a scope of dumped data by extending
current "show stat" to "show stat [<iid> <type> <sid>]":
- iid is a proxy id, -1 to dump all proxies
- type selects type of dumpable objects: 1 for frontend, 2 for backend, 4 for
server, -1 for all types. Values can be ORed, for example:
1+2=3 -> frontend+backend.
1+2+4=7 -> frontend+backend+server.
- sid is a service id, -1 to dump everything from the selected proxy.
To do this I implemented a new session flag (SN_STAT_BOUND), added three
variables in data_ctx.stats (iid, type, sid), modified dumpstats.c and
completely revorked the process_uxst_stats: now it waits for a "\n"
terminated string, splits args and uses them. BTW: It should be quite easy
to add new commands, for example to enable/disable servers, the only problem
I can see is a not very lucky config name (*stats* socket). :|
During the work I also fixed two bug:
- s->flags were not initialized for proto_uxst
- missing comma if throttling not enabled (caused by a stupid change in
"Implement persistent id for proxies and servers")
Other changes:
- No more magic type valuse, use STATS_TYPE_FE/STATS_TYPE_BE/STATS_TYPE_SV
- Don't memset full s->data_ctx (it was clearing s->data_ctx.stats.{iid/type/sid},
instead initialize stats.sv & stats.sv_st (stats.px and stats.px_st were already
initialized)
With all that changes it was extremely easy to write a short perl plugin
for a perl-enabled net-snmp (also included in this patch).
29385 is my PEN (Private Enterprise Number) and I'm willing to donate
the SNMPv2-SMI::enterprises.29385.106.* OIDs for HAProxy if there
is nothing assigned already.
When haproxy decides that session needs to be redispatched it chose a server,
but there is no guarantee for it to be a different one. So, it often
happens that selected server is exactly the same that it was previously, so
a client ends up with a 503 error anyway, especially when one sever has
much bigger weight than others.
Changes from the previous version:
- drop stupid and unnecessary SN_DIRECT changes
- assign_server(): use srvtoavoid to keep the old server and clear s->srv
so SRV_STATUS_NOSRV guarantees that t->srv == NULL (again)
and get_server_rr_with_conns has chances to work (previously
we were passing a NULL here)
- srv_redispatch_connect(): remove t->srv->cum_sess and t->srv->failed_conns
incrementing as t->srv was guaranteed to be NULL
- add avoididx to get_server_rr_with_conns. I hope I correctly understand this code.
- fix http_flush_cookie_flags() and move it to assign_server_and_queue()
directly. The code here was supposed to set CK_DOWN and clear CK_VALID,
but: (TX_CK_VALID | TX_CK_DOWN) == TX_CK_VALID == TX_CK_MASK so:
if ((txn->flags & TX_CK_MASK) == TX_CK_VALID)
txn->flags ^= (TX_CK_VALID | TX_CK_DOWN);
was really a:
if ((txn->flags & TX_CK_MASK) == TX_CK_VALID)
txn->flags &= TX_CK_VALID
Now haproxy logs "--DI" after redispatching connection.
- defer srv->redispatches++ and s->be->redispatches++ so there
are called only if a conenction was redispatched, not only
supposed to.
- don't increment lbconn if redispatcher selected the same sarver
- don't count unsuccessfully redispatched connections as redispatched
connections
- don't count redispatched connections as errors, so:
- the number of connections effectively served by a server is:
srv->cum_sess - srv->failed_conns - srv->retries - srv->redispatches
and
SUM(servers->failed_conns) == be->failed_conns
- requires the "Don't increment server connections too much + fix retries" patch
- needs little more testing and probably some discussion so reverting to the RFC state
Tests #1:
retries 4
redispatch
i) 1 server(s): b (wght=1, down)
b) sessions=5, lbtot=1, err_conn=1, retr=4, redis=0
-> request failed
ii) server(s): b (wght=1, down), u (wght=1, down)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=1, retr=0, redis=0
-> request FAILED
iii) 2 server(s): b (wght=1, down), u (wght=1, up)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=0, retr=0, redis=0
-> request OK
iv) 2 server(s): b (wght=100, down), u (wght=1, up)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=0, retr=0, redis=0
-> request OK
v) 1 server(s): b (down for first 4 SYNS)
b) sessions=5, lbtot=1, err_conn=0, retr=4, redis=0
-> request OK
Tests #2:
retries 4
i) 1 server(s): b (down)
b) sessions=5, lbtot=1, err_conn=1, retr=4, redis=0
-> request FAILED
Commit 98937b875798e10fac671d109355cde29d2a411a while fixing
one bug introduced another one. With "retries 4" and
"option redispatch" haproxy tries to connect 4 times to
one server server and 1 time to a second one. However
logs showed 5 connections to the first server (the
last one was counted twice) and 2 to the second.
This patch also fixes srv->retries and be->retries increments.
Now I get: 3 retries and 1 error in a first server (4 cum_sess)
and 1 error in a second server (1 cum_sess) with:
retries 4
option redispatch
and: 4 retries and 1 error (5 cum_sess) with:
retries 4
So, the number of connections effectively served by a server is:
srv->cum_sess - srv->failed_conns - srv->retries
This patch adds a possibility to set a persistent id for a proxy/server.
Now, even if some proxies/servers are inserted/deleted/moved, iids and
sids can be still used reliable.
Some people add servers with tricky names (BACKEND or FRONTEND for example).
So I also added one more field ('type') to distinguish between a
backend (0), frontend (1) and server (2) without complicated logic:
if name==BACKEND and sid==0 then type is BACKEND else type is SERVER,
etc for a FRONTEND. It also makes possible to have one frontend with more
than one IP (a patch coming soon) with independed stats - for example to
differs between remote and local traffic.
Finally, I added documentation about the CSV format.
This patch depends on '[MEDIUM] Implement "track [<backend>/]<server>"'
This patch implements ability to set the current state of one server
by tracking another one. It:
- adds two variables: *tracknext, *tracked to struct server
- implements findserver(), similar to findproxy()
- adds "track" keyword accepting both "proxy/server" and "server" (assuming current proxy)
- verifies if both checks and tracking is not enabled at the same time
- changes set_server_down() to notify tracking server
- creates set_server_up(), set_server_disabled(), set_server_enabled() by
moving the code from process_chk() and adding notifications
- changes stats to show a name of tracked server instead of Chk/Dwn/Dwntime(html)
or by adding new variable (csv)
Changes from the previuos version:
- it is possibile to track independently of the declaration order
- one extra comma bug is fixed
- new condition to check if there is no disable-on-404 inconsistency
We've been trying to use the latest release (1.3.14.2) of haproxy to do
sticky sessions. Cookie insertion is not an option for us, although we
would much rather use it, as we are trying to work around a problem where
cookies are unreliable. The appsession functionality only partially worked
(it wouldn't read the session id out of a query string) until we made the
following code change to the get_srv_from_appsession function in
proto_http.c.
GCC4 is stupid (unbelievable news!).
When some code uses __builtin_expect(x != 0, 1), it really performs
the check of x != 0 then tests that the result is not zero! This is
a double check when only one was expected. Some performance drops
of 10% in the HTTP parser code have been observed due to this bug.
GCC 3.4 is fine though.
A solution consists in expecting that the tested value is 1. In
this case, it emits the correct code, but it's still not optimal
it seems. Finally the best solution is to ignore likely() and to
pray for the compiler to emit correct code. However, we still have
to fix unlikely() to remove the test there too, and to fix all
code which passed pointers overthere to pass integers instead.
State and offsets within http_msg were incorrectly set to signed int.
Turning them into unsigned slightly improved performance while reducing
code size.
Now when a server has "redir <prefix>" on its config line, any HEAD or GET
request addressing it will lead to a 302 with Location set to "<prefix>"
immediately followed by the relative URI of the incoming request. This makes
it very easy to send redirect to browsers to check remote static servers, as
well as to provide redirection for remote sites when the local one is down.
The servers now support the "redir" keyword, making it possible to
return a 302 with the specified prefix in front of the request instead
of connecting to them. This is generally useful for multi-site load
balancing but may also serve in order to achieve very high traffic
rate.
The keyword has only been added to the config parser and to structures,
it's not used yet.
This patch adds two new variables: fastinter and downinter.
When server state is:
- non-transitionally UP -> inter (no change)
- transitionally UP (going down), unchecked or transitionally DOWN (going up) -> fastinter
- down -> downinter
It allows to set something like:
server sr6 127.0.51.61:80 cookie s6 check inter 10000 downinter 20000 fastinter 500 fall 3 weight 40
In the above example haproxy uses 10000ms between checks but as soon as
one check fails fastinter (500ms) is used. If server is down
downinter (20000) is used or fastinter (500ms) if one check pass.
Fastinter is also used when haproxy starts.
New "timeout.check" variable was added, if set haproxy uses it as an additional
read timeout, but only after a connection has been already established. I was
thinking about using "timeout.server" here but most people set this
with an addition reserve but still want checks to kick out laggy servers.
Please also note that in most cases check request is much simpler
and faster to handle than normal requests so this timeout should be smaller.
I also changed the timeout used for check connections establishing.
Changes from the previous version:
- use tv_isset() to check if the timeout is set,
- use min("timeout connect", "inter") but only if "timeout check" is set
as this min alone may be to short for full (connect + read) check,
- debug code (fprintf) commented/removed
- documentation
Compile tested only (sorry!) as I'm currently traveling but changes
are rather small and trivial.
Commit 8b3977ffe36190e45fb974bf813bfbd935ac99a1 removed "t->logs.bytes_in = 0;"
but instead it should change it into "t->logs.bytes_out = 0;" as since
583bc966064e248771e75c253dddec7351afd8a2 counters are incremented not set.
It should be incremented in session_process_counters while sending data to a
client:
bytes = s->rep->total - s->logs.bytes_out;
s->logs.bytes_out = s->rep->total;
However, if we increment (set) s->logs.bytes_out while processing
"logasap", statistics get wrong values added for headers: 0 or even
negative if haproxy adds some headers itself.
To test it, please enable logasap and download one empty file and look at
stats. Without my fix information available on that page are invalid, for
example:
# pxname,svname,qcur,qmax,scur,smax,slim,stot,bin,bout,dreq,dresp,ereq,econ,eresp,wretr,wredis,status,weight,act,bck,chkfail,chkdown,lastchg,downtime,qlimit,pid,iid,sid,throttle,lbtot,
www,b,0,0,0,1,,1,24,-92,,0,,0,0,0,,UP,1,1,0,0,0,3121,0,,1,2,1,,1,
www,BACKEND,0,0,0,1,0,1,24,-92,0,0,,0,0,0,0,UP,1,1,0,,0,3121,0,,1,2,0,,1,
There's no point trying to check original dest addr with only one
method when doing transparent proxy as in full transparent mode,
the real destination address is required. Let's copy the one from
the frontend.
Due to the way Linux delivers EPOLLIN and EPOLLHUP, a closed connection
received after some server data sometimes results in truncated responses
if the client disconnects before server starts to respond. The reason
is that the EPOLLHUP flag is processed as an indication of end of
transfer while some data may remain in the system's socket buffers.
This problem could only be triggered with sepoll, although nothing should
prevent it from happening with normal epoll. In fact, the work factoring
performed by sepoll increases the risk that this bug appears.
The fix consists in making FD_POLL_HUP and FD_POLL_ERR sticky and that
they are only checked if FD_POLL_IN is not set, meaning that we have
read all pending data.
That way, the problem is definitely fixed and sepoll still remains about
17% faster than epoll since it can take into account all information
returned by the kernel.
The source address selection for health checks did not consider
the new transparent proxy method. Rely on the same unified function
as the other connect() calls.
This patch also fixes a bug by which the proxy's source address was
ignored if cttproxy was used.
Balabit's TPROXY version 4 which replaces CTTPROXY provides a similar
API to the previous proxy, but relies on IP_FREEBIND instead of
IP_TRANSPARENT. Let's add it.
Using some Linux kernel patches which add the IP_TRANSPARENT
SOL_IP option , it is possible to bind to a non-local address
on without having resort to any sort of NAT, thus causing no
performance degradation.
This is by far faster and cleaner than the previous CTTPROXY
method. The code has been slightly changed in order to remain
compatible with CTTPROXY as a fallback for the new method when
it does not work.
It is not needed anymore to specify the outgoing source address
for connect, it can remain 0.0.0.0.
Using some Linux kernel patches, it is possible to redirect non-local
traffic to local sockets when IP forwarding is enabled. In order to
enable this option, we introduce the "transparent" option keyword on
the "bind" command line. It will make the socket reachable by remote
sources even if the destination address does not belong to the machine.
a copy-paste typo was present in the reconnection code responsible
for respatching. The client's FSM would not be re-evaluated if an
error occurred. It looks harmless but better fix it.
Several users have complained that when haproxy gets a connection
failure due to an active reject from a server, it immediately
retries, often leading to the same situation being repeated until
the retry counter reaches zero.
Now if a connection error shows up, a turn-around state of 1 second
is applied before retrying. This is performed by faking a connection
timeout in order not to touch much code. However, a cleaner method
would involve an extra state.
This patch extends a little previously added functionality to also
count retries and redispatches for servers. Now it is possible to know
which server causes redispatches as it is not always the same that takes
most retries.
While working with the code I found that redistribute_pending() does not increment
srv->redispatches && be->redispatches. I don't know how to test it but
I think the fix is correct. If not I can withdraw it.
I also extended logs to show how many retries were done and if redispatching
was necessary ('+'). I'm using an additional session flag SN_REDISP to match
redispatched connections. I had to rearrange all defines in session.h to make
more room for it.
The documentation about logs was also fixed a little (sorry, english only),
as current version uses totally different format. BTW: examples are still
outdated, maybe next time...
Finally, I changed %d -> %u for retries/redispatches as those variables
are declared as unsigned.
It was abnormal to see more connect errors than connect attempts.
This was caused by the fact that the server's connection count was
not incremented for failed connect() attempts.
Now the per-server connections are correctly incremented for each
connect() attempt. This includes the retries too. The number of
connections effectively served by a server will then be :
srv->cum_sess - srv->errors - srv->warnings
In order to offer DoS protection, it may be required to lower the maximum
accepted time to receive a complete HTTP request without affecting the client
timeout. This helps protecting against established connections on which
nothing is sent. The client timeout cannot offer a good protection against
this abuse because it is an inactivity timeout, which means that if the
attacker sends one character every now and then, the timeout will not
trigger. With the HTTP request timeout, no matter what speed the client
types, the request will be aborted if it does not complete in time.
This new parameter makes it possible to override the default
number of consecutive incoming connections which can be
accepted on a socket. By default it is not limited on single
process mode, and limited to 8 in multi-process mode.
Add the "backlog" parameter to frontends, to give hints to
the system about the approximate listen backlog desired size.
In order to protect against SYN flood attacks, one solution is
to increase the system's SYN backlog size. Depending on the
system, sometimes it is just tunable via a system parameter,
sometimes it is not adjustable at all, and sometimes the system
relies on hints given by the application at the time of the
listen() syscall. By default, HAProxy passes the frontend's
maxconn value to the listen() syscall. On systems which can
make use of this value, it can sometimes be useful to be able
to specify a different value, hence this backlog parameter.
It is sometimes required to know some informations such as the
process uptime when consulting statistics. This patch adds the
"show info" command to query those informations on the UNIX
socket.
The build process was getting annoying under some conditions,
especially on platforms which are used to set CFLAGS, as well
as those which set a lot of complex defines. The new Makefile
takes care of this situation by not mixing TARGET, CPU and user
values, and by making privileging the pre-setting of common
variables with the ability to override them.
Now CFLAGS and LDFLAGS are set by default and may be overridden
without the risk of breaking useful defines. Options are better
dealt with, and as a bonus, it was possible to merge the FreeBSD
and OpenBSD targets into the common GNU Makefile.
The report of build options by "haproxy -vv" has been slightly
adapted to the new mode. Options implied by architecture are not
reported, only user-specified options are. It is also possible to
add options which will not be reported in order not to mangle the
output when specifying dirty informations such as URLs...
The Makefile was copiously documented and it should be easier to
build for any target now. Backwards compatibility with older
build processes was kept, and warnings are emitted for deprecated
build options.
This patch adds a possibility to invert most of available options by
introducing the "no" keyword, available as an additional prefix.
If it is found arguments are shifted left and an additional flag (inv)
is set.
It allows to use all options from a current defaults section, except
the selected ones, for example:
-- cut here --
defaults
contimeout 4200
clitimeout 50000
srvtimeout 40000
option contstats
listen stats 1.2.3.4:80
no option contstats
-- cut here --
Currenly inversion works only with the "option" keyword.
The patch also moves last_checks calculation at the end of the readcfgfile()
function and changes "PR_O_FORCE_CLO | PR_O_HTTP_CLOSE" into "PR_O_FORCE_CLO"
in cfg_opts so it is possible to invert forceclose without breaking httpclose
(and vice versa) and to invert tcpsplice in one proxy but to keep a proper
last_checks value when tcpsplice is used in another proxy. Now, the code
checks for PR_O_FORCE_CLO everywhere it checks for PR_O_HTTP_CLOSE.
I also decided to depreciate "redisp" and "redispatch" keywords as it is IMHO
better to use "option redispatch" which can be inverted.
Some useful documentation were added and at the same time I sorted
(alfabetically) all valid options both in the code and the documentation.
The error check in return of start_proxies checked for exact ERR_RETRYABLE
but did not consider the return as a bit field. The function returned both
ERR_RETRYABLE and ERR_ALERT, hence the problem.
Solaris, as well as many other unixes doesn't know about sun_len
for UNIX domain sockets. It does not honnor the __SOCKADDR_COMMON
macro either. After looking at MacOS-X man (which is the same as
BSD man), OpenBSD man, and examples on the net, it appears that
those which support sun_len do not actually use it, or at least
ignore it as long as it's zero. Since all the sockaddr structures
are zeroed prior to being filled, it causes no problem not to set
sun_len, and this fixes build on other platforms.
Another problem on Solaris was that the "sun" name is already
defined as a macro returning a number, so it was necessary to
rename it.
