- urlp_val had unbalanced parenthesis / square brackets
- src_clr_gpc0,src_inc_gpc0,sc2_clr_gpc0,sc2_inc_gpc0,ssl_c_sha1 had
examples not tagged as such.
Another minor doc issue in the use-server example, use-server refers
to server "imap", but the server below is actually called "mail".
Renames the server from "mail" to "imap".
New boolean settings have been added to disable others. Most of them have "no-" as prefix.
"enabled" disables "disabled" setting,
"no-agent-check" disables "agent-check",
"no-backup" disables "backup",
"no-check" disables "check",
"no-check-ssl" disables "check-ssl",
"no-force-sslv3" disables "force-sslv3",
"no-force-tlsv10" disables "force-tlsv10",
"no-force-tlsv11" disables "force-tlsv11",
"no-force-tlsv12" disables "force-tlsv12,
"no-send-proxy" disables "send-proxy",
"no-send-proxy-v2" disables "send-proxy-v2",
"no-send-proxy-v2-ssl" disables "send-proxy-v2-ssl",
"no-send-proxy-v2-ssl-cn" disables "send-proxy-v2-ssl-cn",
"no-ssl" disables "ssl",
"no-verifyhost" disables "verifyhost",
"sslv3" disables "no-sslv3",
"ssl-reuse" disables "no-ssl-reuse",
"stick" disables "non-stick",
"tlsv10" disables "no-tlsv10",
"tlsv11" disables "no-tlsv11",
"tlsv12" disables "no-tlsv12",
"tls-tickets" disables "no-tls-tickets".
Settings with arguments are now supported on "default-server" lines:
"addr", "ca-file", "ciphers", "crl-file", "crt", "cookie", "namespace", "observe",
"redir", "sni", "source", "tcp-ut" and "track".
From now on, all server "settings" including the new ones above are supported by
"default-server" except "id" which is only supported on "server" lines.
When SIGUSR1 is received, haproxy enters in soft-stop and quits when no
connection remains.
It can happen that the instance remains alive for a long time, depending
on timeouts and traffic. This option ensures that soft-stop won't run
for too long.
Example:
global
hard-stop-after 30s # Once in soft-stop, the instance will remain
# alive for at most 30 seconds.
Add SSL-related TLV types PP2_SUBTYPE_SSL_CIPHER,
PP2_SUBTYPE_SSL_SIG_ALG and PP2_SUBTYPE_SSL_KEY_ALG. Rename
PP2_TYPE_CHECKSUM to PP2_TYPE_CRC32C to make it easier to add checksums
using other algorithms. Clarified encoding of the string fields.
Renamed ASCII to US-ASCII as recommended by
https://www.iana.org/assignments/character-sets/character-sets.xhtml.
Add the CRC32c checksum TLV PP2_TYPE_CHECKSUM. Reserve TLV type ranges
CUSTOM, EXPERIMENT and FUTURE. Clarify that only UNSPEC protocol byte is
mandatory to implement on the receiver.
Guillaume Michaud reported against Cyril's haproxy-dconv project
that the index for the Examples section should be 2.5 instead of
2.4.
Should be backported to 1.7 and 1.6, so that the example section
can be linked to:
https://cbonte.github.io/haproxy-dconv/1.6/configuration.html#2.5
This adds 3 new commands to the cli :
enable dynamic-cookie backend <backend> that enables dynamic cookies for a
specified backend
disable dynamic-cookie backend <backend> that disables dynamic cookies for a
specified backend
set dynamic-cookie-key backend <backend> that lets one change the dynamic
cookie secret key, for a specified backend.
This adds a new "dynamic" keyword for the cookie option. If set, a cookie
will be generated for each server (assuming one isn't already provided on
the "server" line), from the IP of the server, the TCP port, and a secret
key provided. To provide the secret key, a new keyword as been added,
"dynamic-cookie-key", for backends.
Example :
backend bk_web
balance roundrobin
dynamic-cookie-key "bla"
cookie WEBSRV insert dynamic
server s1 127.0.0.1:80 check
server s2 192.168.56.1:80 check
This is a first step to be able to dynamically add and remove servers,
without modifying the configuration file, and still have all the load
balancers redirect the traffic to the right server.
Provide a way to generate session cookies, based on the IP address of the
server, the TCP port, and a secret key provided.
This may be used to output the JSON schema which describes the output of
show info json and show stats json.
The JSON output is without any extra whitespace in order to reduce the
volume of output. For human consumption passing the output through a
pretty printer may be helpful.
e.g.:
$ echo "show schema json" | socat /var/run/haproxy.stat stdio | \
python -m json.tool
The implementation does not generate the schema. Some consideration could
be given to integrating the output of the schema with the output of
typed and json info and stats. In particular the types (u32, s64, etc...)
and tags.
A sample verification of show info json and show stats json using
the schema is as follows. It uses the jsonschema python module:
cat > jschema.py << __EOF__
import json
from jsonschema import validate
from jsonschema.validators import Draft3Validator
with open('schema.txt', 'r') as f:
schema = json.load(f)
Draft3Validator.check_schema(schema)
with open('instance.txt', 'r') as f:
instance = json.load(f)
validate(instance, schema, Draft3Validator)
__EOF__
$ echo "show schema json" | socat /var/run/haproxy.stat stdio > schema.txt
$ echo "show info json" | socat /var/run/haproxy.stat stdio > instance.txt
python ./jschema.py
$ echo "show stats json" | socat /var/run/haproxy.stat stdio > instance.txt
python ./jschema.py
Signed-off-by: Simon Horman <horms@verge.net.au>
Add a json parameter to show (info|stat) which will output information
in JSON format. A follow-up patch will add a JSON schema which describes
the format of the JSON output of these commands.
The JSON output is without any extra whitespace in order to reduce the
volume of output. For human consumption passing the output through a
pretty printer may be helpful.
e.g.:
$ echo "show info json" | socat /var/run/haproxy.stat stdio | \
python -m json.tool
STAT_STARTED has bee added in order to track if show output has begun or
not. This is used in order to allow the JSON output routines to only insert
a "," between elements when needed. I would value any feedback on how this
might be done better.
Signed-off-by: Simon Horman <horms@verge.net.au>
It adds "hostname" as a new sample fetch. It does exactly the same as
"%H" in a log format except that it can be used outside of log formats.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
This is like the nbsrv() sample fetch function except that it works as
a converter so it can count the number of available servers of a backend
name retrieved using a sample fetch or an environment variable.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
Now, when option "set-on-error" is enabled, we set a status code representing
the error occurred instead of "true". For values under 256, it represents an
error coming from the engine. Below 256, it reports a SPOP error. In this case,
to retrieve the right SPOP status code, you must remove 256 to this value. Here
are possible values:
* 1: a timeout occurred during the event processing.
* 2: an error was triggered during the ressources allocation.
* 255: an unknown error occurred during the event processing.
* 256+N: a SPOP error occurred during the event processing.
Now, HAProxy and agents can announce the support for "pipelining" and/or "async"
capabilities during the HELLO handshake. For now, HAProxy always announces the
support of both. In addition, in its HELLO frames. HAproxy adds the "engine-id"
key. It is a uniq string that identify a SPOE engine.
The "pipelining" capability is the ability for a peer to decouple NOTIFY and ACK
frames. This is a symmectical capability. To be used, it must be supported by
HAproxy and agents. Unlike HTTP pipelining, the ACK frames can be send in any
order, but always on the same TCP connection used for the corresponding NOTIFY
frame.
The "async" capability is similar to the pipelining, but here any TCP connection
established between HAProxy and the agent can be used to send ACK frames. if an
agent accepts connections from multiple HAProxy, it can use the "engine-id"
value to group TCP connections.
Use SSL_set_ex_data/SSL_get_ex_data standard API call to store capture.
We need to avoid internal structures/undocumented calls usage to try to
control the beast and limit painful compatibilities.
This new sample-fetches captures the cipher list offer by the client
SSL connection during the client-hello phase. This is useful for
fingerprint the SSL connection.
This patch used boringssl's callback to analyse CLientHello before any
handshake to extract key signature capabilities.
Certificat with better signature (ECDSA before RSA) is choosed
transparenty, if client can support it. RSA and ECDSA certificates can
be declare in a row (without order). This makes it possible to set
different ssl and filter parameter with crt-list.
This patch change the names prefixing it by a "_". So "end" becomes "_end".
The backward compatibility with names without the prefix "_" is assured.
In other way, another the keyword "end" can be used like this: Map['end'].
Thanks Robin H. Johnson for the bug repport
This should be backported in version 1.6 and 1.7
crt-list is extend to support ssl configuration. You can now have
such line in crt-list <file>:
mycert.pem [npn h2,http/1.1]
Support include "npn", "alpn", "verify", "ca_file", "crl_file",
"ecdhe", "ciphers" configuration and ssl options.
"crt-base" is also supported to fetch certificates.
[wt: this one is in fact emulated using http-request deny. This
patch can thus be backported to 1.7, 1.6 and 1.5 so that users
of older versions do not add this keyword in their configs]
fc_rcvd_proxy : boolean
Returns true if the client initiated the connection with a PROXY protocol
header.
A flag is added on the struct connection if a PROXY header is successfully
parsed.
The older 'rsprep' directive allows modification of the status reason.
Extend 'http-response set-status' to take an optional string of the new
status reason.
http-response set-status 418 reason "I'm a coffeepot"
Matching updates in Lua code:
- AppletHTTP.set_status
- HTTP.res_set_status
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
It is important to defined analyzers (AN_REQ_* and AN_RES_*) in the same order
they are evaluated in process_stream. This order is really important because
during analyzers evaluation, we run them in the order of the lower bit to the
higher one. This way, when an analyzer adds/removes another one during its
evaluation, we know if it is located before or after it. So, when it adds an
analyzer which is located before it, we can switch to it immediately, even if it
has already been called once but removed since.
With the time, and introduction of new analyzers, this order was broken up. the
main problems come from the filter analyzers. We used values not related with
their evaluation order. Furthermore, we used same values for request and response
analyzers.
So, to fix the bug, filter analyzers have been splitted in 2 distinct lists to
have different analyzers for the request channel than those for the response
channel. And of course, we have moved them to the right place.
Some other analyzers have been reordered to respect the evaluation order:
* AN_REQ_HTTP_TARPIT has been moved just before AN_REQ_SRV_RULES
* AN_REQ_PRST_RDP_COOKIE has been moved just before AN_REQ_STICKING_RULES
* AN_RES_STORE_RULES has been moved just after AN_RES_WAIT_HTTP
Note today we have 29 analyzers, all stored into a 32 bits bitfield. So we can
still add 4 more analyzers before having a problem. A good way to fend off the
problem for a while could be to have a different bitfield for request and
response analyzers.
[wt: all of this must be backported to 1.7, and part of it must be backported
to 1.6 and 1.5]
The parameter "value" of the function TXN.set_var() was not documented.
This is a regression from the commit 85d79c94a93211b156ec644e164b178f5d7101fa.
This patch must be backported in 1.7
These 2 patches add ability to fetch frontend/backend name in your
logic, so they can be used later to make routing decisions (fe_name) or
taking some actions based on backend which responded to request (be_name).
In our case we needed a fetcher to be able to extract information we
needed from frontend name.
Definitions and examples for 51d.single and 51d.all have been added to
configuration.txt so it now appears in online documentation in addition
to the README, The 51degrees-property-name-list entry has also been
updated to make it clear that multiple properties can be added.
In 1.5-dev20, commit 48bcfda ("MEDIUM: dumpstat: make the CLI parser
understand the backslash as an escape char") introduced support for
backslash on the CLI, but it strips all backslashes in all arguments
instead of only unescaping them, making it impossible to pass a
backslash in an argument.
This will allow us to use a backslash in a command over the socket, eg.
"add acl #0 ABC\\XYZ".
[wt: this should be backported to 1.7 and 1.6]
