Function arguments and local variables called "cs" were renamed to "sc"
to avoid future confusion. The HTTP analyser and the backend functions
were all updated after being reviewed. Function stream_update_both_cs()
was renamed to stream_update_both_sc()
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
We're starting to propagate the stream connector's new name through the
API. Most call places of these functions that retrieve the channel or its
buffer are in applets. The local variable names are not changed in order
to keep the changes small and reviewable. There were ~92 uses of cs_ic(),
~96 of cs_oc() (due to co_get*() being less factorizable than ci_put*),
and ~5 accesses to the buffer itself.
This also follows the natural naming. There are roughly 238 changes, all
totally trivial. conn_stream-t.h has become completely void of any
"conn_stream" related stuff now (except its name).
This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
Just like for the appctx, this is a pointer to a stream endpoint descriptor,
so let's make this explicit and not confuse it with the full endpoint. There
are very few changes thanks to the preliminary refactoring of the flags
manipulation.
This changes all main uses of cs->endp->flags to the sc_ep_*() equivalent
by applying coccinelle script cs_endp_flags.cocci.
Note: 143 locations were touched, manually reviewed and found to be OK,
except a single one that was adjusted in cs_reset_endp() where the flags
are read and filtered to be used as-is and not as a boolean, hence was
replaced with sc_ep_get() & $FLAGS.
The script was applied with all includes:
spatch --in-place --recursive-includes -I include --sp-file $script $files
The mux ->detach() function currently takes a conn_stream. This causes
an awkward situation where the caller cs_detach_endp() has to partially
mark it as released but not completely so that ->detach() finds its
endpoint and context, and it cannot be done later since it's possible
that ->detach() deletes the endpoint. As such the endpoint link between
the conn_stream and the mux's stream is in a transient situation while
we'd like it to be clean so that the mux's ->detach() code can call any
regular function it wants that knows the regular semantics of the
relation between the CS and the endpoint.
A better approach consists in slightly modifying the detach() API to
better match the reality, which is that the endpoint is detached but
still alive and that it's the only part the function is interested in.
As such, this patch modifies the function to take an endpoint there,
and by analogy (or simplicity) does the same for ->attach(), even
though it looks less important there since we're always attaching an
endpoint to a conn_stream anyway. It is possible that in the future
the API could evolve to use more endpoints that provide a bit more
flexibility in the API, but at this point we don't need to go further.
This flag is no longer needed now that it must always match the presence
of a destination address on the backend conn_stream. Worse, before previous
patch, if it were to be accidently removed while the address is present, it
could result in a leak of that address since alloc_dst_address() would first
be called to flush it.
Its usage has a long history where addresses were stored in an area shared
with the connection, but as this is no longer the case, there's no reason
for putting this burden onto application-level code that should not focus
on setting obscure flags.
The only place where that made a small difference is in the dequeuing code
in case of queue redistribution, because previously the code would first
clear the flag, and only later when trying to deal with the queue, would
release the address. It's not even certain whether there would exist a
code path going to connect_server() without calling pendconn_dequeue()
first (e.g. retries on queue timeout maybe?).
Now the pendconn_dequeue() code will rely on SF_ASSIGNED to decide to
clear and release the address, since that flag is always set while in
a server's queue, and its clearance implies that we don't want to keep
the address. At least it remains consistent and there's no more risk of
leaking it.
These functions dynamically allocate a source or destination address but
start by clearing the previous one. There's a non-null risk of leaking
addresses there in case of misuse. Better have them do nothing if the
address was already allocated.
Only CS_EP_ERROR flag is now removed from the endpoint when a reset is
performed. When a new the endpoint is allocated, flags are preserved. It is
the caller responsibility to remove other flags, depending on its need.
Concretly, during a connection retry or a L7 retry, we must preserve
flags. In tcpcheck and the CLI, we reset flags.
This patch is 2.6-specific. No backport needed.
There were plenty of leftovers from old code that were never removed
and that are not needed at all since these files do not use any
definition depending on fcntl.h, let's drop them.
Almost all of our hash-based LB algorithms are implemented as special
cases of something that can now be achieved using sample expressions,
and some of them have adopted some options to adapt their behavior in
ways that could also be achieved using converters.
There are users who want to hash other parameters that are combined
into variables, and who set headers from these values and use
"balance hdr(name)" for this.
Instead of constantly implementing specific options and having users
hack around when they want a real hash, let's implement a native hash
mode that applies to a standard sample expression. This way, any
fetchable element (including variables) may be used to construct the
hash, even modified by any converter if desired.
Since the idle connections management changed to use eb-trees instead of MT
lists, a lock must be acquired to manipulate servers idle/safe/available
connection lists. However, it remains an unprotected use in
connect_server(), when a connection is removed from an idle list if the mux
has no more streams available. Thus it is possible to remove a connection
from an idle list on a thread, while another one is looking for a idle
connection. Of couse, this may lead to a crash.
To fix the bug, we must take care to acquire the idle connections lock
first. The bug was introduced by the commit f232cb3e9 ("MEDIUM: connection:
replace idle conn lists by eb trees").
The patch must be backported as far as 2.4.
When an appctx is created on the server side, we now set the corresponding
conn-stream to ready state (CS_ST_RDY). When it happens, the backend
conn-stream is in CS_ST_INI state. It is not consistant to let the
conn-stream in this state because it means it is possible to have a target
installed in CS_ST_INI state, while with a connection, the conn-stream is
switch to CS_ST_RDY or CS_ST_EST state.
It is especially anbiguous because we may be tempted to think there is no
endpoint attached to the conn-stream before the CS_ST_CON state. And it is
indeed the reason for a bug leading to a crash because a cs_detach_endp() is
performed if an abort is detected on the backend conn-stream in CS_ST_INI
state. With a mux or a appctx attached to the conn-stream, "->endp" field is
set to NULL. It is unexpected. The API will be changed to be sure it is not
possible. But it exposes a consistency issue with applets.
So, the conn-stream must not stay in CS_ST_INI state when an appctx is
attached. But there is no reason to set it in CS_ST_REQ. The conn-stream
must be set to CS_ST_RDY to handle applets and connections in the same
way. Note that if only the target is set but no appctx is created, the
backend conn-stream is switched from CS_ST_INI to CS_ST_REQ state to be able
to create the corresponding appctx. This part is unchanged.
This patch depends on the commit "MINOR: backend: Don't allow to change
backend applet".
The ambiguity exists on previous versions. But the issue is
2.6-specific. Thus, no backport is needed.
This part was inherited from haproxy-1.5. But since a while (at least 1.8),
the backend applet, once created, is no longer changed. Thus there is no
reason to still check if the target has changed. And in fact, if it was
still possible, there would be a memory leak because the old applet would be
lost and never released.
There is no reason to backport this fix because the leak only exists on a
dead code path.
si_register_applet() and si_applet_release() are renamed
cs_register_applet() and cs_applet_release() and now manipulate a
conn-stream instead of a stream-inteface.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
To be able to move wait_event from the stream-interface to the conn-stream,
we must be prepare to handle errors when a mux is attached to a conn-stream.
Indeed, the wait_event's tasklet will be allocated when both a mux and a
stream will be both attached to a stream. So, we must be prepared to handle
allocation errors.
si_connect() is moved in backend.c and renamed as do_connect_server(). In
addition, the function now manipulate a stream instead of a
stream-interface.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
Only the server side is concerned by the stream-interface error type. It is
useless to have an err_type field on the client side. So, it is now move to
the stream. SI_ET_* are renames STRM_ET_* and moved in stream-t.h header
file.
Flag to get the source ip/port with getsockname is now handled at the stream
level. Thus SI_FL_SRC_ADDR stream-int flag is replaced by SF_SRC_ADDR stream
flag.
Flags to disable lingering and half-close are now handled at the conn-stream
level. Thus SI_FL_NOLINGER and SI_FL_NOHALF stream-int flags are replaced by
CS_FL_NOLINGER and CS_FL_NOHALF conn-stream flags.
Instead of relying on the conn-stream error, via CS_FL_ERR flags, we now
directly use the error at the endpoint level with the flag CS_EP_ERROR. It
should be safe to do so. But we must be careful because it is still possible
that an error is processed too early. Anyway, a conn-stream has always a
valid endpoint, maybe detached from any endpoint, but valid.
SI_FL_ERR is removed and replaced by CS_FL_ERROR. It is a transient patch
because the idea is to rely on the endpoint to handle errors at this
level. But if for any reason it is not possible, the stream-interface flags
will still be replaced.
The expiration date in the stream-interface was only used on the server side
to set the connect, queue or turn-around timeout. It was checked on the
frontend stream-interface, but never used concretely. So it was removed and
replaced by a connect expiration date in the stream itself. Thus, SI_FL_EXP
flag in stream-interfaces is replaced by a stream flag, SF_CONN_EXP.
The source and destination addresses at the applicative layer are moved from
the stream-interface to the conn-stream. This simplifies a bit the code and
it is a logicial step to remove the stream-interface.
The conn_retries counter was set to the max value and decremented at each
connection retry. Thus the counter reflected the number of retries left and
not the real number of retries. All calculations of redispatch or reporting
of number of retries experienced were made using subtracts from the
configured retries, which was complicated and didn't bring any benefit.
Now, this counter is set to 0 and incremented at each retry. We know we've
reached the maximum allowed connection retries by comparing it to the
configured value. In all other cases, we directly use the counter.
This patch should address the feature request #1608.
The conn_retries counter may be moved into the stream structure. It only
concerns the connection establishment. The frontend stream-interface does not
use it. So it is a logical change.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
All old flags CS_FL_* are now moved in the endpoint scope and renamed
CS_EP_* accordingly. It is a systematic replacement. There is no true change
except for the health-check and the endpoint reset. Here it is a bit special
because the same conn-stream is reused. Thus, we must handle endpoint
allocation errors. To do so, cs_reset_endp() has been adapted.
Thanks to this last change, it will now be possible to simplify the
multiplexer and probably the applets too. A review must also be performed to
remove some flags in the channel or the stream-interface. The HTX will
probably be simplified too. Finally, there is now some place in the
conn-stream to move info from the stream-interface.
The conn-stream endpoint is now shared between the conn-stream and the
applet or the multiplexer. If the mux or the applet is created first, it is
responsible to also create the endpoint and share it with the conn-stream.
If the conn-stream is created first, it is the opposite.
When the endpoint is only owned by an applet or a mux, it is called an
orphan endpoint (there is no conn-stream). When it is only owned by a
conn-stream, it is called a detached endpoint (there is no mux/applet).
The last entity that owns an endpoint is responsible to release it. When a
mux or an applet is detached from a conn-stream, the conn-stream
relinquishes the endpoint to recreate a new one. This way, the endpoint
state is never lost for the mux or the applet.
It is a transient commit to prepare next changes. Now, when a conn-stream is
created from an applet or a multiplexer, an endpoint is always provided. In
addition, the API to create a conn-stream was specialized to have one
function per type.
The next step will be to share the endpoint structure.
Some CS flags, only related to the endpoint, are moved into the endpoint
struct. More will probably moved later. Those ones are not critical. So it
is pretty safe to move them now and this will ease next changes.
