If an error happens during a dump on the CLI, an explicit call to
cli_release_handler() is performed. This is not needed anymore since
we introduced ->release() in the applet which is called upon error.
Let's remove this confusing call which can even be risky in some
situations.
new command 'show servers state' which dumps all variable parameters
of a server during an HAProxy process life.
Purpose is to dump current server state at current run time in order to
read them right after the reload.
The format of the output is versionned and we support version 1 for now.
This patch updates the dns_nameserver structure to integrate a counter
dedicated to 'truncated' response sent by servers.
Such response are important to track, since HAProxy is supposed to
replay its request.
This patch removes the special stick tables types names and
use the standard sample type names. This avoid the maintainance
of two types and remove the switch/case for matching a sample
type for each stick table type.
A map can store and return various types as output. The only one example is the
IPv4 and IPv6 types. The previous patch remove the type from the sample storage
struct and use the conoverter output type, expecting that all entries of the
map have the same type.
This will be wrong when the maps will support both IPv4 and IPv6 as output.
The union name "data" is a little bit heavy while we read the source
code because we can read "data.data.sint". The rename from "data" to "u"
makes the read easiest like "data.u.sint".
This patch remove the struct information stored both in the struct
sample_data and in the striuct sample. Now, only thestruct sample_data
contains data, and the struct sample use the struct sample_data for storing
his own data.
Next patch will remove sample_storage->type, and the only user is the
"show map" feature on the CLI which can use the map's output type instead.
Let's do that first.
Compression stats were not easy to read and could be confusing because
the saving ratio could be taken for global savings while it was only
relative to compressible input. Let's make that a bit clearer using
the new tooltips with a bit more details and also report the effective
ratio over all output bytes.
Dmitry Sivachenko reported the following harmless build warning using Clang :
src/dumpstats.c:5196:48: warning: address of array 'strm_li(sess)->proto->name'
will always evaluate to 'true' [-Wpointer-bool-conversion]
...strm_li(sess) && strm_li(sess)->proto->name ? strm_li(sess)->proto->nam...
~~ ~~~~~~~~~~~~~~~~~~~~~~^~~~
proto->name cannot be null here as it's the protocol name which is stored
directly in the structure.
The same case is present in 1.5 though the code changed.
Some strings which must be dumped in the CSV output can contain one of
the following chars : <,>, <">, or CR/LF. This patch escapes these
strings if the case is encountered.
First, findproxy() was renamed proxy_find_by_name() so that its explicit
that a name is required for the lookup. Second, we give this function
the ability to search for tables if needed. Third we now provide inline
wrappers to pass the appropriate PR_CAP_* flags and to explicitly look
up a frontend, backend or table.
Until now, HAproxy needed to be restarted to change the TLS ticket
keys. With this patch, the TLS keys can be updated on a per-file
basis using the admin socket. Two new socket commands have been
introduced: "show tls-keys" and "set ssl tls-keys".
Signed-off-by: Nenad Merdanovic <nmerdan@anine.io>
Issuing a "show sess all" prior to a "show stat" on the CLI results in no
proxy being dumped because the scope_len union member was not properly
reinitialized.
This fix must be backported into 1.5.
The applets don't fiddle with SI_FL_WAIT_ROOM anymore, instead they indicate
what they want, possibly that they failed (eg: WAIT_ROOM), and it's done() /
update() which finally updates the WAIT_* flags according to the channels'
and stream interface's states. This solves the issue of the pauses during a
"show sess" without creating busy loops.
It's much easier to centralize this call into the I/O handler than to
do it everywhere with the risk to miss it. Applets are not allowed to
unregister themselves anyway so their SI is still present and it is
possible to update all the context.
The applet I/O handlers now rely on si_applet_done() which itself decides
to wake up or sleep the appctx. Now it becomes critical that applte handlers
properly call this on every exit path so that the appctx is removed from the
active list after I/O have been handled. One such call was added to the Lua
socket handler. It used to work without it probably because the main task is
woken up by the parent task but now it's needed.
Now that applet's functions only take an appctx in argument, not a
stream interface. This slightly simplifies the code and will be needed
to take the appctx out of the stream interface.
Differentiate between DRAIN and DRAIN (agent) when reporting stats.
This is consistent with the distinction made between DOWN and DOWN (agent).
Signed-off-by: Simon Horman <horms@verge.net.au>
There are some similarities between a weight of zero and the
administratively set drain state: both allow existing connections
to continue while not accepting any new ones.
However, when reporting a server state generally a distinction is made
between state=UP,weight=0 and state=DRAIN,weight=*. This patch makes
stats reporting consistent in this regard.
This patch does not alter the behaviour that if a server's weight
is zero then its stats row is blue when accessed via HTML. This remains
the case regardless of if the state is UP or DRAIN.
Signed-off-by: Simon Horman <horms@verge.net.au>
There is a relationship between the state and colour of a server in
stats, however, it is not a one-to-one relationship and the current
implementation has proved fragile.
This patch attempts to address that problem by clearly separating
state and colour.
A follow-up patch will further distinguish between DRAIN states
and DRAINING colours.
Signed-off-by: Simon Horman <horms@verge.net.au>
Add an enumeration to make the handling of the states of servers
in status messages somewhat clearer.
This is the first of a two-step attempt to disentangle the state and
colour of status information. A subsequent patch will separate state
colours from the states themselves.
This patch should not make any functional changes.
Signed-off-by: Simon Horman <horms@verge.net.au>
This concerns everythins related to accepting a new session and
expiring the embryonic session. There's still a hard-coded call
to stream_accept_session() which could be set somewhere in the
frontend, but for now it's not a problem.
Now this one is dynamically allocated. It means that 280 bytes of memory
are saved per TCP stream, but more importantly that it will become
possible to remove the l7 pointer from fetches and converters since
it will be deduced from the stream and will support being null.
A lot of care was taken because it's easy to forget a test somewhere,
and the previous code used to always trust s->txn for being valid, but
all places seem to have been visited.
All HTTP fetch functions check the txn first so we shouldn't have any
issue there even when called from TCP. When branching from a TCP frontend
to an HTTP backend, the txn is properly allocated at the same time as the
hdr_idx.
When s->si[0].end was dereferenced as a connection or anything in
order to retrieve information about the originating session, we'll
now use sess->origin instead so that when we have to chain multiple
streams in HTTP/2, we'll keep accessing the same origin.
Just like for the listener, the frontend is session-wide so let's move
it to the session. There are a lot of places which were changed but the
changes are minimal in fact.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
This will be useful later to state that some listeners have to use
certain decoders (typically an HTTP/2 decoder) regardless of the
regular processing applied to other listeners. For now it simply
defaults to the frontend's default target, and it is used by the
session.
Listerner->timeout is a vestigal thing going back to 2007 or so. It
used to only be used by stats and peers frontends to hold a pointer
to the proxy's client timeout. Now that we use regular frontends, we
don't use it anymore.
Some services such as peers and CLI pre-set the target applet immediately
during accept(), and for this reason they're forced to have a dedicated
accept() function which does not even properly follow everything the regular
one does (eg: sndbuf/rcvbuf/linger/nodelay are not set, etc).
Let's store the default target when known into the frontend's config so that
it's session_accept() which automatically sets it.
It was inappropriate to put this flag on every failed write into an
input buffer because it depends where it happens. When it's in the
context of an analyser (eg: hlua) it makes sense. When it's in the
context of an applet (eg: dumpstats), it does not make sense, and
it only happens to work because currently applets are scheduled by
the sessions. The proper solution for applets would be to add the
flag SI_FL_WAIT_ROOM on the stream interface.
Thus, we now don't set any flag anymore in bi_put* and it's up to the
caller to either set CF_WAKE_WRITE on the channel or SI_FL_WAIT_ROOM
on the stream interface. Changes were applied to hlua, peers and
dumpstats.
Patch for not using relative URLs for admin forms. This allows proxied instances
of the stats admin interface to continue to function, as the default FORM
action is to submit to the current URL.
We'll soon remove direct references to the channels from the stream
interface since everything belongs to the same session, so let's
first not dereference si->ib / si->ob anymore and use macros instead.
The channels were pointers to outside structs and this is not needed
anymore since the buffers have moved, but this complicates operations.
Move them back into the session so that both channels and stream interfaces
are always allocated for a session. Some places (some early sample fetch
functions) used to validate that a channel was NULL prior to dereferencing
it. Now instead we check if chn->buf is NULL and we force it to remain NULL
until the channel is initialized.
The value is defined in include/types/global.h to be an unsigned int.
The type format in the printf is for a signed int. This eventually wraps
around.
WT: This bug was introduced in 1.5.
