Same as free_proxy(), but does not free the base proxy pointer (ie: the
proxy itself may not be allocated)
Goal is to be able to cleanup statically allocated dummy proxies.
In this patch we try to use the proxy API init functions as much as
possible to avoid code redundancy and prevent proxy initialization
errors. As such, we prefer using alloc_new_proxy() and setup_new_proxy()
instead of manually allocating the proxy pointer and performing the
base init ourselves.
spoe agent frontend is used by the agent internally, but it is not meant
to be directly exposed like user-facing proxies defined in the config.
As such, better mark it as internal using PR_CAP_INT capability to prevent
any mis-use.
CHECKS-FE frontend is a dummy frontend used to create checks sessions
as such, it is internal and should not be exposed to the user.
Better mark it as internal using PR_CAP_INT capability to prevent
proxy API from ever exposing it.
Split alloc_new_proxy() in two functions: the preparing part is now
handled by setup_new_proxy() which can be called individually, while
alloc_new_proxy() takes care of allocating a new proxy struct and then
calling setup_new_proxy() with the freshly allocated proxy.
errmsg is used with memprintf and friends, thus it must be NULL
initialized before being passed to memprintf, else invalid read will
occur.
However in hlua_init() the errmsg value isn't initialized, let's fix that
This is really minor because it would only cause issue on error paths,
yet it may be backported to all stable versions, just in case.
The server's "usesrc" keyword supports among other options "client"
and "clientip". The former means we bind to the client's IP and port
to connect to the server, while the latter means we bind to its IP
only. It's done in two steps, first alloc_bind_address() retrieves
the IP address and port, and second, tcp_connect_server() decides
to either bind to the IP only or IP+port.
The problem comes with idle connection pools, which hash all the
parameters: the hash is calculated before (and ideally withouy) calling
tcp_connect_server(), and it considers the whole struct sockaddr_storage
for the hash, except that both client and clientip entirely fill it with
the client's address. This means that both client and clientip make use
of the source port in the hash calculation, making idle connections
almost not reusable when using "usesrc clientip" while they should for
clients coming from the same source. A work-around is to force the
source port to zero using "tcp-request session set-src-port int(0)" but
it's ugly.
Let's fix this by properly zeroing the port for AF_INET/AF_INET6 addresses.
This can be backported to 2.4. Thanks to Sebastien Gross for providing a
reproducer for this problem.
At the moment it is not supported to produce multi-line events on the
"show events" output, simply because the LF character is used as the
default end-of-event mark. However it could be convenient to produce
well-formatted multi-line events, e.g. in JSON or other formats. UNIX
utilities have already faced similar needs in the past and added
"-print0" to "find" and "-0" to "xargs" to mention that the delimiter
is the NUL character. This makes perfect sense since it's never present
in contents, so let's do exactly the same here.
Thus from now on, "show events <ring> -0" will delimit messages using
a \0 instead of a \n, permitting a better and safer encapsulation.
In order to support delimiting output events with other characters than
just the LF, let's pass the delimiter through the API. The default remains
the LF, used by applet_append_line(), and ignored by the log forwarder.
Aleandro Prudenzano of Doyensec and Edoardo Geraci of Codean Labs
reported a bug in sample_conv_regsub(), which can cause replacements
of multiple back-references to overflow the temporary trash buffer.
The problem happens when doing "regsub(match,replacement,g)": we're
replacing every occurrence of "match" with "replacement" in the input
sample, which requires a length check. For this, a max is applied, so
that a replacement may not use more than the remaining length in the
buffer. However, the length check is made on the replaced pattern and
not on the temporary buffer used to carry the new string. This results
in the remaining size to be usable for each input match, which can go
beyond the temporary buffer size if more than one occurrence has to be
replaced with something that's larger than the remaining room.
The fix proposed by Aleandro and Edoardo is the correct one (check on
"trash" not "output"), and is the one implemented in this patch.
While it is very unlikely that a config will replace multiple short
patterns each with a larger one in a request, this possibility cannot
be entirely ruled out (e.g. mask a known, short IP address using
"XXX.XXX.XXX.XXX"). However when this happens, the replacement pattern
will be static, and not be user-controlled, which is why this patch is
marked as medium.
The bug was introduced in 2.2 with commit 07e1e3c93e ("MINOR: sample:
regsub now supports backreferences"), so it must be backported to all
versions.
Special thanks go to Aleandro and Edoardo for reporting this bug with
a simple reproducer and a fix.
There have been some reports that using %HV logformat alias with CBOR
encoder would produce invalid CBOR payload according to some CBOR
implementations such as "cbor.me". Indeed, with the below log-format:
log-format "%{+cbor}o %(protocol)HV"
And the resulting CBOR payload:
BF6870726F746F636F6C7F48485454502F312E31FFFF
cbor.me would complain with: "bytes/text mismatch (ASCII-8BIT != UTF-8) in
streaming string") error message.
It is due to the version string being first announced as text, while CBOR
encoder actually encodes it as byte string later when lf_encode_chunk()
is used.
In fact it affects all patterns combining LOG_VARTEXT_START() with
lf_encode_chunk() which means %HM, %HU, %HQ, %HPO and %HP are also
affected. To fix the issue, in _lf_encode_bytes() (which is
lf_encode_chunk() helper), we now check if we are inside a VARTEXT (we
can tell it if ctx->in_text is true), in which case we consider that we
already announced the current data as regular text so we keep the same
type to encode the bytes from the chunk to prevent inconsistencies.
It should be backported in 3.0
negative SNI filters on crt-list lines only have a meaning when they
match a positive wildcard filter. This patch adds a warning which
is emitted when trying to use negative filters without any wildcard on
the same line.
This was discovered in ticket #2900.
negative wildcard filters were always a noop, and are not useful for
anything unless you want to use !* alone to remove every name from a
certificate.
This is confusing and the documentation never stated it correctly. This
patch adds a warning during the bind initialization if it founds one,
only !* does not emit a warning.
This patch was done during the debugging of issue #2900.
_lf_cbor_encode_byte() comment was not updated in c33b857df ("MINOR: log:
support true cbor binary encoding") to reflect the new behavior.
Indeed, binary form is now supported. Updating the comment that says
otherwise.
Some notification_* functions were not thread safe by default as they
assumed only one producer would emit events for registered tasks.
While this suited well with the Lua sockets use-case, this proved to
be a limitation with some other event sources (ie: lua Queue class)
instead of having to deal with both the non thread safe and thread
safe variants (_mt suffix), which is error prone, let's make the
entire API thread safe regarding the event list.
Pruning functions still require that only one thread executes them,
with Lua this is always the case because there is one cleanup list
per context.
Queue:alarm() sets a wakeup alarm on the task when new data becomes
available on Queue. It must be re-armed for each event.
Lua documentation was updated
This is the non-blocking variant for AppletTCP:receive(). It doesn't
take any argument, instead it tries to read as much data as available
at once. If no data is available, empty string is returned.
Lua documentation was updated.
core.wait() now accepts optional delay parameter in ms. Passed this delay
the task is woken up if no event woke the task before.
Lua documentation was updated.
Similar to core.yield(), except that the task is not woken up
automatically, instead it waits for events to trigger the task
wakeup.
Lua documentation was updated.
If Queue:pop_wait() excecuted from a stream context and pop_wait() is
aborted due to a Lua or ressource error, then the waiting object pointing
to the task will still be registered, so if the task eventually dissapears,
Queue:push() may try to wake invalid task pointer..
To prevent this bug from happening, we now rely on notification_* API to
deliver waiting signals. This way signals are properly garbage collected
when a lua context is destroyed.
It should be backported in 2.8 with 86fb22c55 ("MINOR: hlua_fcn: add Queue
class").
This patch depends on ("MINOR: task: add thread safe notification_new and
notification_wake variants")
This commit is a direct follow-up of the previous one. It defines a new
server keyword check-pool-conn-name. It is used as the default value for
the name parameter of idle connection hash generation.
Its behavior is similar to server keyword pool-conn-name, but reserved
for checks reuse. If check-pool-conn-name is set, it is used in priority
to match a connection for reuse. If unset, a fallback is performed on
check-sni.
Support for connection reuse during server checks was implemented
recently. This is activated with the server keyword check-reuse-pool.
Similarly to stream processing via connect_backend(), a connection hash
is calculated when trying to perform reuse for checks. This is necessary
to retrieve for a connection which shares the check connect parameters.
However, idle connections can additionnally be tagged using a
pool-conn-name or SNI under connect_backend(). Check reuse does not test
these values, which prevent to retrieve a matching connection.
Improve this by using "check-sni" value as idle connection hash input
for check reuse. be_calculate_conn_hash() API has been adjusted so that
name value can be passed as input, both when using streams or checks.
Even with the current patch, there is still some scenarii which could
not be covered for checks connection reuse. most notably, when using
dynamic pool-conn-name/SNI value. It is however at least sufficient to
cover simpler cases.
Without check-reuse-pool, it is impossible to perform check on server
using @rhttp protocol. This is due to the inherent nature of the
protocol which does not implement an active connect method.
Thus, ensure that check-reuse-pool is always set when a reverse HTTP
server is declared. This reduces server configuration and should prevent
any omission. Note that it is still require to add "check" server
keyword so activate server checks.
Duplicate server check.reuse_pool boolean value in srv_settings_cpy().
This is necessary to ensure that check-reuse-pool value can be set via
default-server or server-template.
This does not need to be backported.
Server instance can be NULL on connect_server(), either when dispatch or
transparent proxy are active. However, in alloc_dst_address() access to
<srv> is safe thanks to SF_ASSIGNED stream flag. Add an ASSUME_NONNULL()
to reflect this state.
This should fix coverity report from github issue #2922.
The new "crt" lines in frontend and listen sections are confusing:
- a filename is mandatory but we could need a syntax without the
filename in the future, if the filename is generated for example
- there is no clue about the fact that its only used on the frontend
side when reading the line
A new "ssl-f-use" line replaces the "crt" line, but a "crt" keyword
can be used on this line. "f" indicates that this is the frontend
configuration, a "ssl-b-use" keyword could be used in the future.
The "crt" lines only appeared in 3.2-dev so this won't change anything
for people using configurations from previous major versions.
This patch sets the expire of the entry to the max value in
configuration if the value showed in the peer update message
is too far in futur.
This should be backported an all supported branches.
At the begining of process_stream(), the flags of the stream connectors and
channels are saved to be able to handle changes performed in sub-functions
(for instance in analyzers). But, some operations were performed before
saving these flags: Synchronous receives and forced shutdowns. While it
seems to safe for now, it is a bit annoying because some events could be
missed.
So, to avoid bugs in the future, the channels and stream connectors flags
are now really saved before any other processing.
When a forced shutdown is performed on a stream, it is possible to freeze it
infinitly because it is performed in an unexpected way from process_stream()
point of view, especially when the stream is waiting for a server
connection. The events sequence is a bit complex but at the end the stream
remains blocked in turn-around state and no event are trriggered to unblock
it.
By trying to fix the issue, we considered it was safer to rethink the
feature. The idea is to quickly shutdown a stream to release resources. For
instance to be able to delete a server. So, instead of scheduling a
shutdown, it is more efficient to trigger an error and detach the stream
from the server, if neecessary. The same code than the one used to deal with
connection errors in back_handle_st_cer() is used.
This patch must be slowly backported as far as 2.6.
Not all systems have strndup(), that's why we have our "my_strndup()",
so let's make use of it here. This fixes the build on Solaris 10.
No backport is needed, this was just merged with commit fdcb97614c
("MINOR: ssl/ckch: add substring parser for ckch_conf").
The UDP GSO code emits a build warning with older toolchains (gcc 5 and 6):
src/quic_sock.c: In function 'cmsg_set_gso':
src/quic_sock.c:683:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
*((uint16_t *)CMSG_DATA(c)) = gso_size;
^
Let's just use the write_u16() function that's made for this purpose.
It was verified that for all versions from 5 to 13, gcc produces the
exact same code with the fix (and without the warning). It arrived in
3.1 with commit 448d3d388a ("MINOR: quic: add GSO parameter on quic_sock
send API") so this can be backported there.
Since recent commit ee94a6cfc1 ("MINOR: backend: extract conn reuse
from connect_server()") a build warning "set but not used" on the
"reuse" variable is emitted, because indeed the variable is now only
checked when SSL is in use. Let's just mark it as such.
Implement the possibility to reuse idle connections when performing
server checks. This is done thanks to the recently introduced functions
be_calculate_conn_hash() and be_reuse_connection().
One side effect of this change is that be_calculate_conn_hash() can now
be called with a NULL stream instance. As such, part of the functions
are adjusted accordingly.
Note that to simplify configuration, connection reuse is not performed
if any specific check connection parameters are defined on the server
line or via the tcp-check connect rule. This is performed via newly
defined tcpcheck_use_nondefault_connect().
Define a new server keyword check-reuse-pool, and its counterpart with a
"no" prefix. For the moment, only parsing is implemented. The real
behavior adjustment will be implemented in the next patch.
Adjust newly defined be_reuse_connection() API. The stream argument is
removed. This will allows checks to be able to invoke it without relying
on a stream instance.
Following the previous patch, the part directly related to connection
reuse is extracted from connect_server(). It is now define in a new
function be_reuse_connection().
On connection reuse, a hash is first calculated. It is generated from
various connection parameters, to retrieve a matching connection.
Extract hash calculation from connect_server() into a new dedicated
function be_calculate_conn_hash(). The objective is to be able to
perform connection reuse for checks, without connect_server() invokation
which relies on a stream instance.
The main objective of this patch is to remove the stream instance from
conn_backend_get() parameters. This would allow to perform reuse outside
of stream contexts, for example for checks purpose.
Previously, if a server reached its pool-high-count limit, connection
were killed on connect_server() when reuse was not possible. However,
this is now performed even if reuse is done since the following patch :
b3397367dc7cec9e78c62c54efc24d9db5cde2d2
MEDIUM: connections: Kill connections even if we are reusing one.
Thus, adjust the related comment to reflect this state.
On backend connection reuse, a hash is calculated from various
parameters, to ensure the selected connection match the requested
parameters. Notably, destination address is one of these parameters.
However, it is only taken into account if using a transparent server
(server address 0.0.0.0).
This may cause issue where an incorrect connection is reused, which is
not targetted to the correct destination address. This may be the case
if a set-dst/set-dst-port is used with a transparent proxy (proxy option
transparent).
The fix is simple enough. Destination address is now always used as
input to the connection reuse hash.
This must be backported up to 2.6. Note that for reverse HTTP to work,
it relies on the following patch, which ensures destination address
remains NULL in this case.
commit e94baf6ca71cb2319610baa74dbf17b9bc602b18
BUG/MINOR: rhttp: fix incorrect dst/dst_port values
Previously, destination address of backend connection was systematically
always reassigned. However, this step is unnecessary on connection
reuse. Indeed, reuse should only be conducted with connection using the
same destination address matching the stream requirements.
This patch removes this unnecessary assignment. It is now only performed
when reuse cannot be conducted and a new connection is instantiated.
Functionnally speaking, this patch should not change anything in theory,
as reuse is performed in conformance with the destination address.
However, it appears that it was not always properly enforced. The
systematic assignment of the destination address hides these issues, so
it is now remove. The identified bogus cases will then be fixed in the
following patches.would
This should be backported up to all stable versions.
With a @rhttp server, connect is not possible, transfer is only possible
via idle connection reuse. The server does not have any network address.
Thus, it is unnecessary to allocate the stream destination address prior
to connection reuse. This patch adjusts this by fixing
alloc_dst_address() to take this into account.
Prior to this patch, alloc_dst_address() would incorrectly assimilate a
@rhttp server with a transparent proxy mode. Thus stream destination
address would be copied from the destination address. Connection adress
would then be rewrote with this incorrect value. This did not impact
connect or reuse as destination addr is only used in idle conn hash
calculation for transparent servers. However, it causes incorrect values
for dst/dst_port samples.
This should be backported up to 2.9.
It may happen that the server is going down, and fwlc_srv_reposition()
is still called, because streams still attached to the server are
being terminated.
So in fwlc_srv_reposition(), just do nothing if we've been removed from
the tree.
This should fix github issue #2919.
This should not be backported, unless commit
9fe72bba3cf3484577fa1ef00723de08df757996 is also backported.

