This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
This state is pointless now, it just serves to initialize the initial
table pointer while this can be done more easily in the parser, so let's
do that and drop that state.
Let's instead define a 4-state enum solely for this use case, and place
it into the command's context. Note that END and FIN were already
aliases, which is why they were merged.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing. The code also uses st2 which deserves being
addressed in separate commit.
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
When an ipv6 key is used to filter a CLI command on a stick table
(clear/set/show table ...), the return value of inet_pton() call must be
checked to be sure the key is valid.
This patch should fix the issue #1163. It should be backported to all
supported versions.
This change is required to support TCP/HTTP rules in defaults sections. The
'disabled' bitfield in the proxy structure, used to know if a proxy is
disabled or stopped, is replaced a generic bitfield named 'flags'.
PR_DISABLED and PR_STOPPED flags are renamed to PR_FL_DISABLED and
PR_FL_STOPPED respectively. In addition, everywhere there is a test to know
if a proxy is disabled or stopped, there is now a bitwise AND operation on
PR_FL_DISABLED and/or PR_FL_STOPPED flags.
There have been a large number of issues reported with conn_cur
synchronization because the concept is wrong. In an active-passive
setup, pushing the local connections count from the active node to
the passive one will result in the passive node to have a higher
counter than the real number of connections. Due to this, after a
switchover, it will never be able to close enough connections to
go down to zero. The same commonly happens on reloads since the new
process preloads its values from the old process, and if no connection
happens for a key after the value is learned, it is impossible to reset
the previous ones. In active-active setups it's a bit different, as the
number of connections reflects the number on the peer that pushed last.
This patch solves this by marking the "conn_cur" local and preventing
it from being learned from peers. It is still pushed, however, so that
any monitoring system that collects values from the peers will still
see it.
The patch is tiny and trivially backportable. While a change of behavior
in stable branches is never welcome, it remains possible to fix issues
if reports become frequent.
We'll need to improve the API to pass other arguments in the future, so
let's start to adapt better to the current use cases. task_new() is used:
- 18 times as task_new(tid_bit)
- 18 times as task_new(MAX_THREADS_MASK)
- 2 times with a single bit (in a loop)
- 1 in the debug code that uses a mask
This patch provides 3 new functions to achieve this:
- task_new_here() to create a task on the calling thread
- task_new_anywhere() to create a task to be run anywhere
- task_new_on() to create a task to run on a specific thread
The change is trivial and will allow us to later concentrate the
required adaptations to these 3 functions only. It's still possible
to call task_new() if needed but a comment was added to encourage the
use of the new ones instead. The debug code was not changed and still
uses it.
The sc-set-gpt0() parser was extended in 2.1 by commit 0d7712dff ("MINOR:
stick-table: allow sc-set-gpt0 to set value from an expression") to support
sample expressions in addition to plain integers. However there is a
subtlety there, which is that while the arg position must be incremented
when parsing an integer, it must not be touched when calling an expression
since the expression parser already does it.
The effect is that rules making use of sc-set-gpt0() followed by an
expression always ignore one word after that expression, and will typically
fail to parse if followed by an "if" as the parser will restart after the
"if". With no condition it's different because an empty condition doesn't
result in trying to parse anything.
This patch moves the increment at the right place and adds a few
explanations for a code part that was far from being obvious.
This should be backported to branches having the commit above (2.1+).
gcc 8.3.0 spews a bunch of:
src/stick_table.c: In function 'action_inc_gpc0':
include/haproxy/freq_ctr.h:66:12: warning: 'period' may be used uninitialized in this function [-Wmaybe-uninitialized]
curr_tick += period;
^~
src/stick_table.c:2241:15: note: 'period' was declared here
unsigned int period;
^~~~~~
but they're incorrect because all accesses are guarded by the exact same
condition (ptr1 not being null), it's just the compiler being overzealous
about the uninitialized detection that seems to be stronger than its
ability to follow its own optimizations. This code path is not critical,
let's just pre-initialize the period to zero.
No backport is needed.
This patch makes the use of 'gpc' excluding the use of the legacy
types 'gpc0' and 'gpc1" on the same table.
It also makes the use of 'gpc_rate' excluding the use of the legacy
types 'gpc0_rate' and 'gpc1_rate" on the same table.
The 'gpc0' and 'gpc1' related fetches and actions will apply
to the first two elements of the 'gpc' array if stored in table.
The 'gpc0_rate' and 'gpc1_rate' related fetches and actions will apply
to the first two elements of the 'gpc_rate' array if stored in table.
This patch adds the definition of two new array data_types:
'gpc': This is an array of 32bits General Purpose Counters.
'gpc_rate': This is an array on increment rates of General Purpose Counters.
Like for all arrays, they are limited to 100 elements.
This patch also adds actions and fetches to handle
elements of those arrays.
Note: As documented, those new actions and fetches won't
apply to the legacy 'gpc0', 'gpc1', 'gpc0_rate' nor 'gpc1_rate'.
This patch makes the use of 'gpt' excluding the use of the legacy
type 'gpt0' on the same table.
It also makes the 'gpt0' related fetches and actions applying
to the first element of the 'gpt' array if stored in table.
This patch adds the definition of a new array data_type
'gpt'. This is an array of 32bits General Purpose Tags.
Like for all arrays, it is limited to 100 elements.
This patch also adds actions and fetches to handle
elements of this array.
Note: As documented, those new actions and fetches won't
apply to the legacy 'gpt0' data type.
This patch provides the code to handle arrays of some
standard types (SINT, UINT, ULL and FRQP) in stick table.
This way we could define new "array" data types.
Note: the number of elements of an array was limited
to 100 to put a limit and to ensure that an encoded
update message will continue to fit into a buffer
when the peer protocol will handle such data types.
This patch replaces all advanced data type aliases on
stktable_data_cast calls by standard types.
This way we could call the same stktable_data_cast
regardless of the used advanced data type as long they
are using the same std type.
It also removes all the advanced data type aliases.
This patch fixes several errors printing integers
of stick table entry values and args during dump on cli.
This patch should be backported since the dump of entries
is supported. [wt: roughly 1.5-dev1 hence all stable branches]
A memory allocation failure happening during peers_register_table would
have resulted in a crash. This function is only called during init.
It was raised in GitHub issue #1233.
It could be backported to all stable branches.
Since the introduction of bc_src, smp_fetch_src from tcp_sample inspect
the kw argument to choose between the frontend or the backend source
address. However, for the stick tables, the argument is left to NULL.
This causes a segfault.
Fix the crash by explicitely set the kw argument to "src" to retrieve
the source address of the frontend side.
This bug was introduced by the following commit :
7d081f02a4
MINOR: tcp_samples: Add samples to get src/dst info of the backend connection
It does not need a backport as it is integrated in the current 2.4-dev
branch.
To reproduce the crash, I used the following config :
frontend fe
bind :20080
http-request track-sc0 src table foo
http-request reject if { src_conn_rate(foo) gt 10 }
use_backend h1
backend foo
stick-table type ip size 200k expire 30s store conn_rate(60s)
backend h1
server nginx 127.0.0.1:30080 check
This should fix the github issue #1247.
This function has no business being inlined in stick_table.h since it's
only used at boot time by the config parser. In addition it causes an
undesired dependency on tools.h because it uses parse_time_err(). Let's
move it to stick_table.c.
Define a new keyword flag KWF_MATCH_PREFIX. This is used to replace the
match_pfx field of action struct.
This has the benefit to have more explicit action declaration, and now
it is possible to quickly implement experimental actions.
There were 102 CLI commands whose help were zig-zagging all along the dump
making them unreadable. This patch realigns all these messages so that the
command now uses up to 40 characters before the delimiting colon. About a
third of the commands did not correctly list their arguments which were
added after the first version, so they were all updated. Some abuses of
the term "id" were fixed to use a more explanatory term. The
"set ssl ocsp-response" command was not listed because it lacked a help
message, this was fixed as well. The deprecated enable/disable commands
for agent/health/server were prominently written as deprecated. Whenever
possible, clearer explanations were provided.
Both structures are identical except the name of the field starting
the period and its description. Let's call them all freq_ctr and the
period's start "curr_tick" which is generic.
This is only a temporary change and fields are expected to remain
the same with no code change (verified).
It's been too short for quite a while now and is now full. It's still
time to extend it to 32-bits since we have room for this without
wasting any space, so we now gained 16 new bits for future flags.
The values were not reassigned just in case there would be a few
hidden u16 or short somewhere in which these flags are placed (as
it used to be the case with stream->pending_events).
The patch is tagged MEDIUM because this required to update the task's
process() prototype to use an int instead of a short, that's quite a
bunch of places.
Historically we've been counting lots of client-triggered events in stick
tables to help detect misbehaving ones, but we've been missing the same on
the server side, and there's been repeated requests for being able to count
the server errors per URL in order to precisely monitor the quality of
service or even to avoid routing requests to certain dead services, which
is also called "circuit breaking" nowadays.
This commit introduces http_fail_cnt and http_fail_rate, which work like
http_err_cnt and http_err_rate in that they respectively count events and
their frequency, but they only consider server-side issues such as network
errors, unparsable and truncated responses, and 5xx status codes other
than 501 and 505 (since these ones are usually triggered by the client).
Note that retryable errors are purposely not accounted for, so that only
what the client really sees is considered.
With this it becomes very simple to put some protective measures in place
to perform a redirect or return an excuse page when the error rate goes
beyond a certain threshold for a given URL, and give more chances to the
server to recover from this condition. Typically it could look like this
to bypass a URL causing more than 10 requests per second:
stick-table type string len 80 size 4k expire 1m store http_fail_rate(1m)
http-request track-sc0 base # track host+path, ignore query string
http-request return status 503 content-type text/html \
lf-file excuse.html if { sc0_http_fail_rate gt 10 }
A more advanced mechanism using gpt0 could even implement high/low rates
to disable/enable the service.
Reg-test converteers_ref_cnt_never_dec.vtc was updated to test it.
The sample fetch functions must always be called with a valid argument
list. When called by hand, if there is no argument to pass, empty_arg_list must
be used.
In the stick-table code, there are some calls to smp_fetch_src() with NULL as
argument list. It is changed to use empty_arg_list instead. It is not really a
bug because smp_fetch_src() does not use the argument list. But it is an API
bug.
This patch may be backported to all stable branches as a cleanup.
This handler can take quite some time as it deletes a large number of
entries under a lock, let's export it so that it's immediately visible
in "show profiling".
This allows using the address of the server rather than the name of the
server for keeping track of servers in a backend for stickiness.
The peers code was also extended to support feeding the dictionary using
this key instead of the name.
Fixes#814
An interesting case was reported with threads and moderately sized
stick-tables. Sometimes the watchdog would trigger during the purge.
It turns out that the stick tables were sized in the 10s of K entries
which is the order of magnitude of the possible number of connections,
and that threads were used over distinct NUMA nodes. While at first
glance nothing looks problematic there, actually there is a risk that
a thread trying to purge the table faces 100% of entries still in use
by a connection with (ts->ref_cnt > 0), and ends up scanning the whole
table, while other threads on the other NUMA node are causing the
cache lines to bounce back and forth and considerably slow down its
progress to the point of possibly spending hundreds of milliseconds
there, multiplied by the number of queued threads all failing on the
same point.
Interestingly, smaller tables would not trigger it because the scan
would be faster, and larger ones would not trigger it because plenty
of entries would be idle!
The most efficient solution is to increase the table size to be large
enough for this never to happen, but this is not reliable. We could
have a parallel list of idle entries but that would significantly
increase the storage and processing cost only to improve a few rare
corner cases.
This patch takes a more pragmatic approach, it considers that it will
not visit more than twice the number of nodes to be deleted, which
means that it accepts to fail up to 50% of the time. Given that very
small batches are programmed each time (1/256 of the table size), this
means the operation will finish quickly (128 times faster than now),
and will reduce the inter-thread contention. If this needs to be
reconsidered, it will probably mean that the batch size needs to be
fixed differently.
This needs to be backported to stable releases which extensively use
threads, typically 2.0.
Kudos to Nenad Merdanovic for figuring the root cause triggering this!
The remaining proxy states were only used to distinguish an enabled
proxy from a disabled one. Due to the initialization order, both
PR_STNEW and PR_STREADY were equivalent after startup, and they
would only differ from PR_STSTOPPED when the proxy is disabled or
shutdown (which is effectively another way to disable it).
Now we just have a "disabled" field which allows to distinguish them.
It's becoming obvious that start_proxies() is only used to print a
greeting message now, that we'd rather get rid of. Probably that
zombify_proxy() and stop_proxy() should be merged once their
differences move to the right place.
This is totally ugly, smp_fetch_src() is exported only so that stick_table.c
can (ab)use it in the {sc,src}_* sample fetch functions. It could be argued
that the sample could have been reconstructed there in place, but we don't
even need to duplicate the code. We'd rather simply retrieve the "src"
fetch's function from where it's used at init time and be done with it.
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
Most of the files dealing with error reports have to include log.h in order
to access ha_alert(), ha_warning() etc. But while these functions don't
depend on anything, log.h depends on a lot of stuff because it deals with
log-formats and samples. As a result it's impossible not to embark long
dependencies when using ha_warning() or qfprintf().
This patch moves these low-level functions to errors.h, which already
defines the error codes used at the same places. About half of the users
of log.h could be adjusted, sometimes revealing other issues such as
missing tools.h. Interestingly the total preprocessed size shrunk by
4%.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
Almost no change except moving the cli_kw struct definition after the
defines. Almost all users had both types&proto included, which is not
surprizing since this code is old and it used to be the norm a decade
ago. These places were cleaned.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
The stktable_types[] array declaration was moved to the main file as
it had nothing to do in the types. A few declarations were reordered
in the types file so that defines were before the structs. Thread-t
was added since there are a few __decl_thread(). The loss of peers.h
revealed that cfgparse-listen needed it.
