Now, When a item is committed in an LRU tree, you can define a function to free
data owned by this item. This function will be called when the item is removed
from the LRU tree or when the tree is destroyed..
When using the "51d" converter without specifying the list of 51Degrees
properties to detect (see parameter "51degrees-property-name-list"), the
"global._51d_property_names" could be left uninitialized which will lead to
segfault during init.
Since all rules listed in p->block_rules have been moved to the beginning of
the http-request rules in check_config_validity(), there is no need to clean
p->block_rules in deinit().
Signed-off-by: Godbach <nylzhaowei@gmail.com>
As best I can tell, no mention is made of "set-log-level" in the Logging
[Section 8] of the doc.
Something akin to the following in the doc would have saved a good chunk of
time/angst in addressing a logging issue I encountered :
Since both DEVICEATLAS_INC and DEVICEATLAS_LIB are set to the same path
when building from sources, simply allow DEVICEATLAS_SRC to be set alone
to simplify the build procedure.
An ifdef was missing to avoid declaring these variables :
src/haproxy.c: In function 'deinit':
src/haproxy.c:1253:47: warning: unused variable '_51d_prop_nameb' [-Wunused-variable]
src/haproxy.c:1253:30: warning: unused variable '_51d_prop_name' [-Wunused-variable]
Till now 3 paths were needed, 51DEGREES_SRC, 51DEGREES_INC, and
51DEGREES_LIB. Let's make the last two default to 51DEGREES_SRC since
it's the same location, and fix the doc to reflect this (all three were
documented but inconsistently).
It takes up to 5 string arguments that are to be 51Degrees property names.
It will then create a chunk with values detected based on the request header
supplied (this should be the User-Agent).
To build with 51Degrees set USE_51DEGREES=1. 51DEGREES_INC, 51DEGREES_LIB,
and 51DEGREES_SRC will need to be set to the 51Degrees pattern header and
C file.
When haproxy is run on the foreground with DeviceAtlas enabled, one
line of warning is seen for every test because the comparison is always
true even when loglevel is zero :
willy@wtap:haproxy$ ./haproxy -db -f test-da.cfg
[WARNING] 151/150831 (25506) : deviceatlas : final memory image 7148029 bytes.
Deviceatlas module loaded.
[WARNING] 151/150832 (25506) : deviceatlas : .
[WARNING] 151/150833 (25506) : deviceatlas : .
[WARNING] 151/150833 (25506) : deviceatlas : .
^C
Don't emit a warning when loglevel is null.
This diff is related to the additional documentation in
order to build the DeviceAtlas module and in addition with
an example of a basic configuration.
This diff updates the Makefile to compile conditionally via
some new sets of flags, USE_DEVICEATLAS to enable the module
and the couple DEVICEATLAS_INC/DEVICEATLAS_LIB which needs to
point to the API root folder in order to compile the API and
the module.
This diff initialises few DeviceAtlas struct fields member with
their inherent default values.
Furthermore, the specific DeviceAtlas configuration keywords are
registered and the module is initialised and all necessary
resources are freed during the deinit phase.
This diff declares the deviceatlas module and can accept up to 5
property names for the API lookup.
[wt: this should probably be moved to its own file using the keyword
registration mechanism]
This diff is the raw C struct definition of all DeviceAtlas module
data needed added to the main global struct haproxy configuration.
The three first members are needed for both init and deinit phases
as some dynamic memory allocations are done.
The useragentid serves to hold during the whole lifecycle of the
module the User-Agent HTTP Header identifier from the DeviceAtlas
data during the init process.
This diff is for the DeviceAtlas convertor.
This patch adds the following converters :
deviceatlas-json-file
deviceatlas-log-level
deviceatlas-property-separator
First, the configuration keywords handling (only the log
level configuration part does not end the haproxy process
if it is wrongly set, it fallbacks to the default level).
Furthermore, init, deinit phases and the API lookup phase,
the da_haproxy function which is fed by the input provided
and set all necessary properties chosen via the configuration
to the output, separated by the separator.
It is likely that powerful adversaries have been pre-computing the
standardized DH groups, because being widely used have made them
valuable targets. While users are advised to generate their own
DH parameters, replace the ones we ship by values been randomly
generated for this product only.
[wt: replaced dh1024_p, dh2048_p, and dh4096_p with locally-generated
ones as recommended by Rémi]
This patch adds the ssl-dh-param-file global setting. It sets the
default DH parameters that will be used during the SSL/TLS handshake when
ephemeral Diffie-Hellman (DHE) key exchange is used, for all "bind" lines
which do not explicitely define theirs.
Actually, the registered lua actions with "tcp-request lua" and
"tcp-response lua" are final actions. This patch change the action
type type and permit to continue the evaluation of tcp-* processing
after the evaluation of the lua actions.
Actually, the tcp-request and tcp-response custom ation are always final
actions. This patch create a new type of action that can permit to
continue the evaluation of tcp-request and tcp-response processing.
This patch does'nt add any new feature: the functional behavior
is the same than version 1.0.
Technical differences:
In this version all updates on different stick tables are
multiplexed on the same tcp session. There is only one established
tcp session per peer whereas in first version there was one established
tcp session per peer and per stick table.
Messages format was reviewed to be more evolutive and to support
further types of data exchange such as SSL sessions or other sticktable's
data types (currently only the sticktable's server id is supported).
Commit 9fbe18e ("MEDIUM: http: add a new option http-buffer-request")
introduced a regression due to a misplaced check causing the admin
mode of the HTTP stats not to work anymore.
This patch tried to ensure that when we need a request body for the
stats applet, and we have already waited for this body, we don't wait
for it again, but the condition was applied too early causing a
disabling of the entire processing the body, and based on the wrong
HTTP state (MSG_BODY) resulting in the test never matching.
Thanks to Chad Lavoie for reporting the problem.
This bug is 1.6-only, no backport is needed.
Most of the keywords in the global section does not check the maximum
number of arguments. This leds sometines to unused and wrong arguments
in the configuration file. This patch add a maximum argument test in
many keywords of this section.
This patch checks the number of arguments of the keywords:
'global', 'defaults', 'listen', 'backend', 'frontend', 'peers' and
'userlist'
The 'global' section does not take any arguments.
Proxy sections does not support bind address as argument anymore. Those
sections supports only an <id> argument.
The 'defaults' section didn't had any check on its arguments. It takes
an optional <name> argument.
'peers' section takes a <peersect> argument.
'userlist' section takes a <listname> argument.
If the 'userlist' keyword parsing returns an error and no userlist were
previously created. The parsing of 'user' and 'group' leads to NULL
derefence.
The userlist pointer is now tested to prevent this issue.
Hervé Commowick reported that the logic used to avoid complaining about
ssl-default-dh-param not being set when static DH params are present
in the certificate file was clearly wrong when more than one sni_ctx
is used.
This patch stores whether static DH params are being used for each
SSL_CTX individually, and does not overwrite the value of
tune.ssl.default-dh-param.
Some strings which must be dumped in the CSV output can contain one of
the following chars : <,>, <">, or CR/LF. This patch escapes these
strings if the case is encountered.
This function checks a string for using it in a CSV output format. If
the string contains one of the following four char <">, <,>, CR or LF,
the string is encapsulated between <"> and the <"> are escaped by a <"">
sequence.
The rounding by <"> is optionnal. It can be canceled, forced or the
function choose automatically the right way.
There are two reasons for not keeping the client connection alive upon a
redirect :
- save the client from uploading all data
- avoid keeping a connection alive if the redirect goes to another domain
The first case should consider an exception when all the data from the
client have been read already. This specifically happens on response
redirects after a POST to a server. This is an easy situation to detect.
It could later be improved to cover the cases where option
http-buffer-request is used.
Sometimes it's problematic not to have "http-response redirect" rules,
for example to perform a browser-based redirect based on certain server
conditions (eg: match of a header).
This patch adds "http-response redirect location <fmt>" which gives
enough flexibility for most imaginable operations. The connection to
the server is closed when this is performed so that we don't risk to
forward any pending data from the server.
Any pending response data are trimmed so that we don't risk to
forward anything pending to the client. It's harmless to also do that
for requests so we don't need to consider the direction.
In order to support http-response redirect, the parsing needs to be
adapted a little bit to only support the "location" type, and to
adjust the log-format parser so that it knows the direction of the
sample fetch calls.
This function was made to perform a redirect on requests only, it was
using a message or txn->req in an inconsistent way and did not consider
the possibility that it could be used for the other direction. Let's
clean it up to have both a request and a response messages.
