204 and 304 HTTP responses must no contain message body. These status codes are
correctly handled when the responses are received from a server. But there is no
specific processing for internal HTTP reponses (errorfile and http replies).
Now, when errorfiles or an http replies are parsed during the configuration
parsing, an error is triggered if a 204/304 message contains a body. An extra
check is also performed to ensure the body length matches the announce
content-length.
This patch should fix the issue #891. It must be backported as far as 2.0. For
2.1 and 2.0, only the http_str_to_htx() function must be fixed.
http_parse_http_reply() function does not exist.
96 bytes is announce in the C-L header for a message of body of 97 bytes. This
bug was introduced by the patch 46a030cdd ("CLEANUP: assorted typo fixes in the
code and comments").
This patch must be backported in all versions where the patch above is (the 2.2
for now).
This patch is similar to the previous one on the fcgi. Same is true for the
H2. But the bug is far harder to trigger because of the protocol cinematic. But
it may explain strange aborts in some edge cases.
A read0 received on the connection must not be handled too early by H2 streams.
If the demux buffer is not empty, the pending read0 must not be considered. The
H2 streams must not be passed in half-closed remote state in
h2s_wake_one_stream() and the CS_FL_EOS flag must not be set on the associated
conn-stream in h2_rcv_buf(). To sum up, it means, if there are still data
pending in the demux buffer, no abort must be reported to the streams.
To fix the issue, a dedicated function has been added, responsible for detecting
pending read0 for a H2 connection. A read0 is reported only if the demux buffer
is empty. This function is used instead of conn_xprt_read0_pending() at some
places.
Note that the HREM stream state should not be used to report aborts. It is
performed on h2s_wake_one_stream() function and it is a legacy of the very first
versions of the mux-h2.
This patch should be backported as far as 2.0. In the 1.8, the code is too
different to apply it like that. But it is probably useless because the mux-h2
can only be installed on the client side.
A read0 received on the connection must not be handled too early by FCGI
streams. If the demux buffer is not empty, the pending read0 must not be
considered. The FCGI streams must not be passed in half-closed remote state in
fcgi_strm_wake_one_stream() and the CS_FL_EOS flag must not be set on the
associated conn-stream in fcgi_rcv_buf(). To sum up, it means, if there are
still data pending in the demux buffer, no abort must be reported to the
streams.
To fix the issue, a dedicated function has been added, responsible for detecting
pending read0 for a FCGI connection. A read0 is reported only if the demux
buffer is empty. This function is used instead of conn_xprt_read0_pending() at
some places.
This patch should fix the issue #886. It must be backported as far as 2.1.
This patch re-introduce the "bind" statement on log forward
sections to handle syslog TCP listeners as defined in
rfc-6587.
As complement it introduce "maxconn", "backlog" and "timeout
client" statements to parameter those listeners.
Old processes didn't die if a log foward section is declared and
a soft stop is requested.
This patch fix this issue and should be backpored in banches including
the log forward feature.
Coverity reported dead code in sock_unix_bind_receiver() function. A goto clause
is unreachable because of the preceeding if/else block.
This patch should fix the issue #865. No backport needed.
There is no reason to wake up the H1 connection when a new output buffer is
retrieved after an allocation failure because only the H1 stream will fill it.
The session is always defined for a frontend connection. When a new client
connection is established, the session is set for the first H1 stream. But on
keep-alived connections, it is not set for the followings H1 streams while it is
possible.
This patch is tagged as a bug because it fixes an inconsistency in the H1
streams creation. But it does not fixed a known bug.
This patch must be backported as far as 2.0.
The condition to set CO_RFL_READ_ONCE flag is not really accurate. We must check
the request state on frontend connection only and, in the opposite, the response
state on backend connection only. Only the parsed side must be considered, not
the opposite one.
This patch must be backported to 2.2.
On deinit, when the server SSL ctx is released, we must take care to release the
cached SSL sessions stored in the array <ssl_ctx.reused_sess>. There are
global.nbthread entries in this array, each one may have a pointer on a cached
session.
This patch should fix the issue #802. No backport needed.
During the config check, the post parsing is not performed. Thus, cache filters
are not fully initialized and their cache name are never released. To be able to
release them, a flag is now set when a cache filter is fully initialized. On
deinit, if the flag is not set, it means the cache name must be freed.
The patch should fix#849. No backport needed.
[Cf: Tim is the patch author, but I added the commit message]
When a TCP listener is bound, in the tcp_bind_listener() function, a warning
message may be reported and should be displayed on verbose mode. But the warning
message is actually lost if the socket is successfully bound because we don't
fill the <errmsg> variable in this case.
This patch should fix the issue #863. No backport is needed.
A peer connection status must be considered as valid only if there is an applet
which has been instantiated for the connection to the peer. So, ->statuscode
should be considered as the last known peer connection status from the last
connection to this peer if any. To reflect this, "statuscode" field of peer dump
is renamed to "last_statuscode".
This patch also add "active"/"inactive" field after the peer location type
("remote" or "local") if an applet has been instantiated for this peer connection
or not.
Thank you to Emeric for having noticed this issue.
Must be backported in >=1.9 version.
Remove variable declaration inside a for-loop. This was introduced by my
patches serie of the implementation of dynamic stats. This is not
supported by older gcc, notably on the freebsd environment of the ci.
Use the new stats module API to integrate the dns counters in the
standard stats. This is done in order to avoid code duplication, keep
the code related to cli out of dns and use the full possibility of the
stats function, allowing to print dns stats in csv or json format.
Integrate the additional proxy stats on the html stats page. For each
module, a new column is displayed with the individual stats available as
a tooltip.
Add a boolean 'clearable' on stats module structure. If set, it forces
all the counters to be reset on 'clear counters' cli command. If not,
the counters are reset only when 'clear counters all' is used.
This is executed on startup with the registered statistics module. The
existing statistics have been merged in a list containing all
statistics for each domain. This is useful to print all available
statistics in a generic way.
Allocate extra counters for all proxies/servers/listeners instances.
These counters are allocated with the counters from the stats modules
registered on startup.
A stat module can be registered to quickly add new statistics on
haproxy. It must be attached to one of the available stats domain. The
register must be done using INITCALL on STG_REGISTER.
The stat module has a name which should be unique for each new module in
a domain. It also contains a statistics list with their name/desc and a
pointer to a function used to fill the stats from the module counters.
The module also provides the initial counters values used on
automatically allocated counters. The offset for these counters
are stored in the module structure.
Use the character '-' to mark the end of static statistics on proxy
domain. After this marker, the order of the fields is not guaranteed and
should be parsed with care.
This flag can be used to determine on what type of proxy object the
statistics should be relevant. It will be useful when adding dynamic
statistics. Currently, this flag is not used.
The domain option will be used to have statistics attached to other
objects than proxies/listeners/servers. At the moment, only the PROXY
domain is available.
Add an argument 'domain' on the 'show stats' cli command to specify the
domain. Only 'domain proxy' is available now. If not specified, proxy
will be considered the default domain.
For HTML output, only proxy statistics will be displayed.
Debug Messages emitted in lua using core.Debug() or core.log() are now only
displayed on stderr if HAProxy is started in debug mode (-d parameter on the
command line). There is no change for other message levels.
This patch should fix the issue #879. It may be backported to all stable
versions.
Create a dedicated function to loop on proxies and dump them. This will
be clearer when other object will be dump as well.
This patch is needed to extend stat support to components other than
proxies objects.
Create a dedicated function to dump a proxy as a json content. This
patch will be needed when other types of objects will be available for
json dump.
This patch is needed to extend stat support to components other than
proxies objects.
Use an opaque pointer to store proxy instance. Regroup server/listener
as a single opaque pointer. This has the benefit to render the structure
more evolutive to support statistics on other types of objects in the
future.
This patch is needed to extend stat support for components other than
proxies objects.
The prometheus module has been adapted for these changes.
Render the stats size parametric in csv/json dump functions. This is
needed for the future patch which provides dynamic stats. For now the
static value ST_F_TOTAL_FIELDS is provided.
Remove unused parameter px on stats_dump_one_line.
This patch is needed to extend stat support to components other than
proxies objects.
Un-mark stats_dump_one_line and stats_putchk as static and export them
in the header file. These functions will be reusable by other components to
print their statistics.
This patch is needed to extend stat support to components other than
proxies objects.
There is a confusion between the HAProxy bundle and OpenSSL. OpenSSL
does not have "bundles" but multiple certificates in the same store.
Fix a commentary in the crt-list code.
Since the health-check refactoring in the 2.2, the checks through a socks4 proxy
are broken. To fix this bug, CO_FL_SOCKS4 flag must be set on the connection
before calling the connect() callback function because this flags is checked to
use the right destination address. The same is done for the CO_FL_SEND_PROXY
flag for a consistency purpose.
A reg-test has been added to test the "check-via-socks4" directive.
This patch must be backported to 2.2.
The warning is only emitted for HTTP frontend. Idea is to encourage the usage of
"tcp-request session" rules to track counters that does not depend on the
request content. The documentation has been updated accordingly.
The warning is important because since the multiplexers were added in the
processing chain, the HTTP parsing is performed at a lower level. Thus parsing
errors are detected in the multiplexers, before the stream creation. In HTTP/2,
the error is reported by the multiplexer itself and the stream is never
created. This difference has a certain number of consequences, one of which is
that HTTP request counting in stick tables only works for valid H2 request, and
HTTP error tracking in stick tables never considers invalid H2 requests but only
invalid H1 ones. And the aim is to do the same with the mux-h1. This change will
not be done for the 2.3, but the 2.4. At the end, H1 and H2 parsing errors will
be caught by the multiplexers, at the session level. Thus, tracking counters at
the content level should be reserved for rules using a key based on the request
content or those using ACLs based on the request content.
To be clear, a warning will be emitted for the following rules :
tcp-request content track-sc0 src
tcp-request content track-sc0 src if ! { src 10.0.0.0/24 }
tcp-request content track-sc0 src if { ssl_fc }
But not for the following ones :
tcp-request content track-sc0 req.hdr(host)
tcp-request content track-sc0 src if { req.hdr(host) -m found }
We use chunk_initstr() to store the program name as the default log-tag.
If we use the log-tag directive in the config file, this chunk will be
destroyed and replaced. chunk_initstr() sets the chunk size to 0 so we
will free the chunk itself, but not its content.
This happens for a global section and also for a proxy.
We fix this by using chunk_initlen() instead of chunk_initstr().
We also check that the memory allocation was successfull, otherwise we quit.
This fixes github issue #850.
It can be backported as far as 1.9, with minor adjustments to includes.
this condition is never true as we either break or goto error, so those
two lines could be removed in the current state of the code.
this is fixing github issue #862
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Similar to warning during the parsing of the regular configuration file
that was added in 2fd5bdb439da29f15381aeb57c51327ba57674fc this patch adds
a warning to the parsing of a crt-list if the file does not end in a
newline (and thus might have been truncated).
The logic essentially just was copied over. It might be good to refactor
this in the future, allowing easy re-use within all line-based config
parsers.
see https://github.com/haproxy/haproxy/issues/860#issuecomment-693422936
see 0354b658f061d00d5ab4b728d7deeff2c8f1503a
This should be backported as a warning to 2.2.
Previous commit fa41cb679 ("MINOR: tools: support for word expansion
of environment in parse_line") introduced two new isspace() on a char
and broke the build on systems using an array disguised in a macro
instead of a function (like cygwin). Just use the usual cast.
Allow the syntax "${...[*]}" to expand an environment variable
containing several values separated by spaces as individual arguments. A
new flag PARSE_OPT_WORD_EXPAND has been added to toggle this feature on
parse_line invocation. In case of an invalid syntax, a new error
PARSE_ERR_WRONG_EXPAND will be triggered.
This feature has been asked on the github issue #165.
For some algos (roundrobin, static-rr, leastconn, first) we know that
if there is any request queued in the backend, it's because a previous
attempt failed at finding a suitable server after trying all of them.
This alone is sufficient to decide that the next request will skip the
LB algo and directly reach the backend's queue. Doing this alone avoids
an O(N) lookup when load-balancing on a saturated farm of N servers,
which starts to be very expensive for hundreds of servers, especially
under the lbprm lock. This change alone has increased the request rate
from 110k to 148k RPS for 200 saturated servers on 8 threads, and
fwlc_reposition_srv() doesn't show up anymore in perf top. See github
issue #880 for more context.
It could have been the same for random, except that random is performed
using a consistent hash and it only considers a small set of servers (2
by default), so it may result in queueing at the backend despite having
some free slots on unknown servers. It's no big deal though since random()
only performs two attempts by default.
For hashing algorithms this is pointless since we don't queue at the
backend, except when there's no hash key found, which is the least of
our concerns here.
If random() returns a server whose maxconn is reached or the queue is
used, instead of adding the request to the server's queue, better add
it to the backend queue so that it can be served by any server (hence
the fastest one).
We should not exits on error out of the crtlist_parse_line() function.
The cfgerr error must be checked with the ERR_CODE mask.
Must be backported in 2.2.
If the TRACE option is used when compiling the haproxy source,
the following error occurs on debian 9.13:
src/calltrace.o: In function `make_line':
.../src/calltrace.c:204: undefined reference to `rdtsc'
src/calltrace.o: In function `calltrace':
.../src/calltrace.c:277: undefined reference to `rdtsc'
collect2: error: ld returned 1 exit status
Makefile:866: recipe for target 'haproxy' failed
The code dealing with zombie proxies in soft_stop() is bogus, it uses
close() instead of fd_delete(), leaving a live entry in the fdtab with
a dangling pointer to a free memory location. The FD might be reassigned
for an outgoing connection for the time it takes the proxy to completely
stop, or could be dumped on the CLI's "show fd" command. In addition,
the listener's FD was not even reset, leaving doubts about whether or
not it will happen again in deinit().
And in deinit(), the loop in charge of closing zombie FDs is particularly
unsafe because it closes the fd then calls unbind_listener() then
delete_listener() hoping none of them will touch it again. Since it
requires some mental efforts to figure what's done there, let's correctly
reset the fd here as well and close it using fd_delete() to eliminate any
remaining doubts.
It's uncertain whether this should be backported. Zombie proxies are rare
and the situations capable of triggering such issues are not trivial to
setup. However it's easy to imagine how things could go wrong if backported
too far. Better wait for any matching report if at all (this code has been
there since 1.8 without anobody noticing).
There's a nasty case with listeners that belong to foreign processes.
If a proxy is defined this way:
global
nbproc 2
frontend f
bind :1111 process 1
bind :2222 process 2
and if stats expose-fd listeners is set, the listeners' FDs will not
be closed on the processes that don't use them. At this point it's not
a big deal, except that they're shared between processes and that a
"disable frontend f" issued on one process will pause all of them and
cause the other process to see accept() fail, turning its own listener
to state LI_LIMITED to try to leave it some time to recover. But it
will never recover, even after an enable.
The root cause of the issue is that the ZOMBIE state doesn't cover
this situation since it's only for a proxy being entirely bound to a
process.
What we do here to address this is that we refrain from pausing a
file descriptor that belongs to a foreign process in pause_listener().
This definitely solves the problem. A similar test is present in
resume_listener() and is the reason why the FD doesn't recover upon the
"enable" action by the way.
This ought to be backported to 1.8 where seamless reload was integrated.
The config above should be sufficient to validate that the fix works;
after a pair of "disable/enable frontend" no process will handle the
traffic to one of the ports anymore.
