This patch adds QUIC structs to server struct so that to make the QUIC code
compile. Also initializes the ebtree to store the connections by connection
IDs.
This patch adds a quic_transport_params struct to bind_conf struct
used for the listeners. This is to store the QUIC transport parameters
for the listeners. Also initializes them when calling str2listener().
Before str2sa_range() it's too early to figure we're going to speak QUIC,
and after it's too late as listeners are already created. So it seems that
doing it in str2listener() when the protocol is discovered is the best
place.
Also adds two ebtrees to the underlying receivers to store the connection
by connections IDs (one for the original connection IDs, and another
one for the definitive connection IDs which really identify the connections.
However it doesn't seem normal that it is stored in the receiver nor the
listener. There should be a private context in the listener so that
protocols can store internal information. This element should in
fact be the listener handle.
Something still feels wrong, and probably we'll have to make QUIC and
SSL co-exist: a proof of this is that there's some explicit code in
bind_parse_ssl() to prevent the "ssl" keyword from replacing the xprt.
This patch imports all the C files for QUIC protocol implementation with few
modifications from 20200720-quic branch of quic-dev repository found at
https://github.com/haproxytech/quic-dev.
Traces were implemented to help with the development.
When parsing "ssl" keyword for TLS bindings, we must not use the same xprt as the one
for TLS/TCP connections. So, do not modify the QUIC xprt which will be initialized
when parsing QUIC addresses wich "ssl" bindings.
QUIC needs to initialize its BIO and SSL session the same way as for SSL over TCP
connections. It needs also to use the same ClientHello callback.
This patch only exports functions and variables shared between QUIC and SSL/TCP
connections.
This patch extraces the code which initializes the BIO and SSL session
objects so that to reuse it elsewhere later for QUIC conections which
only needs SSL and BIO objects at th TLS layer stack level to work.
We add src/quic_sock.c QUIC specific socket management functions as callbacks
for the control layer: ->accept_conn, ->default_iocb and ->rx_listening.
accept_conn() will have to be defined. The default I/O handler only recvfrom()
the datagrams received. Furthermore, ->rx_listening callback always returns 1 at
this time but should returns 0 when reloading the processus.
As QUIC is a connection oriented protocol, this file is almost a copy of
proto_tcp without TCP specific features. To suspend/resume a QUIC receiver
we proceed the same way as for proto_udp receivers.
With the recent updates to the listeners, we don't need a specific set of
quic*_add_listener() functions, the default ones are sufficient. The fields
declaration were reordered to make the various layers more visible like in
other protocols.
udp_suspend_receiver/udp_resume_receiver are up-to-date (the check for INHERITED
is present) and the code being UDP-specific, it's normal to use UDP here.
Note that in the future we might more reasily reference stacked layers so that
there's no more need for specifying the pointer here.
A new XXH3 variant of hash functions shows a noticeable improvement in
performance (especially on small data), and also brings 128-bit support,
better inlining and streaming capabilities.
Performance comparison is available here:
https://github.com/Cyan4973/xxHash/wiki/Performance-comparison
Allow the user to specify a custom Connection header for http-check
send. This is useful for example to implement a websocket upgrade check.
If no connection header has been set, a 'Connection: close' header is
automatically appended to allow the server to close the connection
immediately after the request/response.
Update the documentation related to http-check send.
This fixes the github issue #1009.
This is a regression in 7838a79ba ("MEDIUM: mux-h2/trace: add lots of traces
all over the code"). The issue was found using -Wmisleading-indentation.
This patch fixes GitHub issue #1015.
The impact of this bug is that it could in theory cause occasional delays
on some long responses for connections having otherwise no traffic.
This patch should be backported to 2.1+, the commit was first tagged in
v2.1-dev2.
This bug happens when a service has multiple records on the same host
and the server provides the A/AAAA resolution in the response as AR
(Additional Records).
In such condition, the first occurence of the host will be taken from
the Additional section, while the second (and next ones) will be process
by an independent resolution task (like we used to do before 2.2).
This can lead to a situation where the "synchronisation" of the
resolution may diverge, like described in github issue #971.
Because of this behavior, HAProxy mixes various type of requests to
resolve the full list of servers: SRV+AR for all "first" occurences and
A/AAAA for all other occurences of an existing hostname.
IE: with the following type of response:
;; ANSWER SECTION:
_http._tcp.be2.tld. 3600 IN SRV 5 500 80 A2.tld.
_http._tcp.be2.tld. 3600 IN SRV 5 500 86 A3.tld.
_http._tcp.be2.tld. 3600 IN SRV 5 500 80 A1.tld.
_http._tcp.be2.tld. 3600 IN SRV 5 500 85 A3.tld.
;; ADDITIONAL SECTION:
A2.tld. 3600 IN A 192.168.0.2
A3.tld. 3600 IN A 192.168.0.3
A1.tld. 3600 IN A 192.168.0.1
A3.tld. 3600 IN A 192.168.0.3
the first A3 host is resolved using the Additional Section and the
second one through a dedicated A request.
When linking the SRV records to their respective Additional one, a
condition was missing (chek if said SRV record is already attached to an
Additional one), leading to stop processing SRV only when the target
SRV field matches the Additional record name. Hence only the first
occurence of a target was managed by an additional record.
This patch adds a condition in this loop to ensure the record being
parsed is not already linked to an Additional Record. If so, we can
carry on the parsing to find a possible next one with the same target
field value.
backport status: 2.2 and above
SSL_CTX_get0_privatekey is openssl/boringssl specific function present
since openssl-1.0.2, let us define readable guard for it, not depending
on HA_OPENSSL_VERSION
Since commit 8a069eb9a ("MINOR: debug: add a trivial PRNG for scheduler
stress-tests"), 32-bit gcc 4.7 emits this warning when parsing the
initial seed for the debugger's RNG (2463534242):
src/debug.c:46:1: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
Let's mark it explicitly unsigned.
On frontend side, when a conn-stream is detached from a H1 connection, the
H1 stream is destroyed and if we already have some data to parse (a
pipelined request), we process these data immedialtely calling
h1_process(). Then we adjust the H1 connection timeout. But h1_process() may
fail and release the H1 connection. For instance, a parsing error may be
reported. Thus, when that happens, we must not use anymore the H1 connection
and exit.
This patch must be backported as far as the 2.2. This bug can impact the 2.3
and the 2.2, in theory, if h1 stream creation fails. But, concretly, it only
fails on the 2.4 because the requests are now parsed at this step.
When a channel is set in TUNNEL mode, we now always set the CF_NEVER_WAIT flag,
to be sure to never wait for sending data. It is important because in TUNNEL
mode, we have no idea if more data are expected or not. Setting this flag
prevent the MSG_MORE flag to be set on the connection.
It is only a problem with the HTX, since the 2.2. On previous versions, the
MSG_MORE flag is only set on the mux initiative. In fact, the problem arises
because there is an ambiguity in tunnel mode about the HTX_FL_EOI flag. In this
mode, from the mux point of view, while the SHUTR is not received more data are
expected. But from the channel point of view, we want to send data asap.
At short term, this fix is good enough and is valid anyway. But for the long
term more reliable solution must be found. At least, the to_forward field must
regain its original meaning.
This patch must be backported as far as 2.2.
When a protocol upgrade request is received, once parsed, it is waiting for
the response in the DONE state. But we must not set the flag CS_FL_EOI
because we don't know if a protocol upgrade will be performed or not.
Now, it is set on the response path, if both sides reached the DONE
state. If a protocol upgrade is finally performed, both side are switched in
TUNNEL state. Thus the CS_FL_EOI flag is not set.
If backported, this patch must be adapted because for now it relies on last
2.4-dev changes. It may be backported as far as 2.0.
As stated in the rfc7231, section 4.3.6, an HTTP tunnel via a CONNECT method
is successfully established if the server replies with any 2xx status
code. However, only 200 responses are considered as valid. With this patch,
any 2xx responses are now considered to estalish the tunnel.
This patch may be backported on demand to all stable versions and adapted
for the legacy HTTP. It works this way since a very long time and nobody
complains.
Due to the addition of the OpenTracing filter it is necessary to define
ARGC_OT enum. This value is used in the functions fmt_directive() and
smp_resolve_args().
The OpenTracing filter uses several internal HAProxy functions to work
with variables and therefore requires two static local HAProxy functions,
var_accounting_diff() and var_clear(), to be declared global.
In fact, the var_clear() function was not originally defined as static,
but it lacked a declaration.
This new option allows to tune the maximum number of simultaneous
entries with the same primary key in the cache (secondary entries).
When we try to store a response in the cache and there are already
max-secondary-entries living entries in the cache, the storage will
fail (but the response will still be sent to the client).
It defaults to 10 and does not have a maximum number.
The secondary entry counter cannot be updated without going over all the
items of a duplicates list periodically. In order to avoid doing it too
often and to impact the cache's performances, a timestamp is added to
the cache_entry. It will store the timestamp (with second precision) of
the last iteration over the list (actually the last call of the
clear_expired_duplicates function). This way, this function will not be
called more than once per second for a given duplicates list.
Add an arbitrary maximum number of secondary entries per primary hash
(10 for now) to the cache. This prevents the cache from being filled
with duplicates of the same resource.
This works thanks to an entry counter that is kept in one of the
duplicates of the list (the last one).
When an entry is added to the list, the ebtree's implementation ensures
that it will be added to the end of the existing list so the only thing
to do to keep the counter updated is to get the previous counter from
the second to last entry.
Likewise, when an entry is explicitely deleted, we update the counter
from the list's last item.
SSL_CTX_add_server_custom_ext is openssl specific function present
since openssl-1.0.2, let us define readable guard for it, not depending
on HA_OPENSSL_VERSION
The cache entries are now added into the tree even when they are not
complete yet. If we realized while trying to add a response's payload
that the shctx was full, the entry was disabled through the
disable_cache_entry function, which cleared the key field of the entry's
node, but without actually removing it from the tree. So the shctx row
could be stolen from the entry and the row's content be rewritten while
a lookup in the tree would still find a reference to the old entry. This
caused a random crash in case of cache saturation and row reuse.
This patch adds the missing removal of the node from the tree next to
the reset of the key in disable_cache_entry.
This bug was introduced by commit 3243447 ("MINOR: cache: Add entry
to the tree as soon as possible")
It does not need to be backported.
In issue #1004, it was reported that it is not possible to remove
correctly a certificate after updating it when it came from a crt-list.
Indeed the "commit ssl cert" command on the CLI does not update the list
of ckch_inst in the crtlist_entry. Because of this, the "del ssl
crt-list" command does not remove neither the instances nor the SNIs
because they were never linked to the crtlist_entry.
This patch fixes the issue by inserting the ckch_inst in the
crtlist_entry once generated.
Must be backported as far as 2.2.
When a frontend H1 connection timed out waiting for the next request, a 408
error message is returned to the client. It is performed into the H1C task
process function, h1_timeout_task(), and under the idle connection takeover
lock. If the 408 error message cannot be sent immediately, we wait for a
next retry. In this case, the lock must be released.
This bug was introduced by the commit c4bfa59f1d ("MAJOR: mux-h1: Create the
client stream as later as possible") and is specific to the 2.4-DEV. No
backport needed.
Depending on the context, the current eweight or the next one must be used
to reposition a server in the tree. When the server state is updated, for
instance its weight, the next eweight must be used because it is not yet
committed. However, when the server is used, on normal conditions, the
current eweight must be used.
In fact, it is only a bug on the 1.8. On newer versions, the changes on a
server are performed synchronously. But it is safer to rely on the right
eweight value to avoid any futur bugs.
On the 1.8, it is important to do so, because the server state is updated
and committed inside the rendez-vous point. Thus, the next server state may
be unsync with the current state for a short time, waiting all threads join
the rendez-vous point. It is especially a problem if the next eweight is set
to 0. Because otherwise, it must not be used to reposition the server in the
tree, leading to a divide by 0.
This patch must be backported as far as 1.8.
This changes the subscribe/unsubscribe functions to rely on the control
layer's check_events/ignore_events. At the moment only the socket version
of these functions is present so the code should basically be the same.
Right now the connection subscribe/unsubscribe code needs to manipulate
FDs, which is not compatible with QUIC. In practice what we need there
is to be able to either subscribe or wake up depending on readiness at
the moment of subscription.
This commit introduces two new functions at the control layer, which are
provided by the socket code, to check for FD readiness or subscribe to it
at the control layer. For now it's not used.
Now we don't touch the fd anymore there, instead we rely on the ->drain()
provided by the control layer. As such the function was renamed to
conn_ctrl_drain().
This is what we need to drain pending incoming data from an connection.
The code was taken from conn_sock_drain() without the connection-specific
stuff. It still takes a connection for now for API simplicity.
conn_fd_handler() is 100% specific to socket code. It's about time
it moves to sock.c which manipulates socket FDs. With it comes
conn_fd_check() which tests for the socket's readiness. The ugly
connection status check at the end of the iocb was moved to an inlined
function in connection.h so that if we need it for other socket layers
it's not too hard to reuse.
The code was really only moved and not changed at all.
The send() loop present in this function and the error handling is already
present in raw_sock_from_buf(). Let's rely on it instead and stop touching
the FD from this place. The send flag was changed to use a more agnostic
CO_SFL_*. The name was changed to "conn_ctrl_send()" to remind that it's
meant to be used to send at the lowest level.
Add cur_server_timeout and cur_tunnel_timeout.
These sample fetches return the current timeout value for a stream. This
is useful to retrieve the value of a timeout which was changed via a
set-timeout rule.
Prepare the possibility to register sample fetches on the stream.
This commit is necessary to implement sample fetches to retrieve the
current timeout values.
Add a new http-request action 'set-timeout [server/tunnel]'. This action
can be used to update the server or tunnel timeout of a stream. It takes
two parameters, the timeout name to update and the new timeout value.
This rule is only valid for a proxy with backend capabilities. The
timeout value cannot be null. A sample expression can also be used
instead of a plain value.
Allow the modification of the tunnel timeout on the stream side.
Use a new field in the stream for the tunnel timeout. It is initialized
by the tunnel timeout from backend unless it has already been set by a
set-timeout tunnel rule.
Allow the modification of the timeout server value on the stream side.
Do not apply the default backend server timeout in back_establish if it
is already defined. This is the case if a set-timeout server rule has
been executed.
parse_size_err() function is now more strict on the size format. The first
character must be a digit. Otherwise an error is returned. Thus "size k" is
now rejected.
This patch must be backported to all stable versions.
