A TCP/HTTP action can stop the rules evaluation. However, it should be
applied on the current section only. For instance, for http-requests rules,
an "allow" on a frontend must stop evaluation of rules defined in this
frontend. But the backend rules, if any, must still be evaluated.
For http-response rulesets, according the configuration manual, the same
must be true. Only "allow" action is concerned. However, since the
beginning, this action stops evaluation of all remaining rules, not only
those of the current section.
This patch may be backported to all supported versions. But it is not so
critical because the bug exists since a while. I doubt it will break any
existing configuration because the current behavior is
counterintuitive.
- add new metric: `haproxy_backend_agg_server_check_status`
it counts the number of servers matching a specific check status
this permits to exclude per server check status as the usage is often
to rely on the total. Indeed in large setup having thousands of
servers per backend the memory impact is not neglible to store the per
server metric.
- realign promex_str_metrics array
quite simple implementation - we could improve it later by adding an
internal state to the prometheus exporter, thus to avoid counting at
every dump.
this patch is an attempt to close github issue #1312. It may bebackported
to 2.4 if requested.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
The httpclient uses channel_add_input() to notify the channel layer that
it must forward some data. This function was used with b_data(&req->buf)
which ask to send the size of a buffer (because of the HTX metadata
which fill the buffer completely).
This is wrong and will have the consequence of trying to send data that
doesn't exist, letting HAProxy looping at 100% CPU.
When using htx channel_add_input() must be used with the size of the htx
payload, and not the size of a buffer.
When sending the request payload it also need to sets the buffer size to
0, which is achieved with a htx_to_buf() when the htx payload is empty.
This patch fixes the receive part of the lua httpclient when no payload
was sent.
The lua task was not awoken once it jumped into
hlua_httpclient_rcv_yield(), which caused the lua client to freeze.
It works with a payload because the payload push is doing the wakeup.
A change in the state machine of the IO handler is also require to
achieve correctly the change from the REQ state to the RES state, it has
to detect if there is the right EOM flag in the request.
When "max-age" or "s-maxage" receive their values in quotes, the pointer
to the integer to be parsed is advanced by one, but the error pointer
check doesn't consider this advanced offset, so it will not match a
parse error such as max-age="a" and will take the value zero instead.
This probably needs to be backported, though it's unsure it has any
effect in the real world.
This function claims to perform an strncat()-like operation but it does
not, it always copies the indicated number of bytes, regardless of the
presence of a NUL character (what is currently done by chunk_memcat()).
Let's remove it and explicitly replace it with chunk_memcat().
Fix potential allocation failure of HTX start-line during H3 request
decoding. In this case, h3_decode_qcs returns -1 as error code.
This addresses in part github issue #1445.
During a troublehooting it came obvious that the SNI always ought to
be logged on httpslog, as it explains errors caused by selection of
the default certificate (or failure to do so in case of strict-sni).
This expectation was also confirmed on the mailing list.
Since the field may be empty it appeared important not to leave an
empty string in the current format, so it was decided to place the
field before a '/' preceding the SSL version and ciphers, so that
in the worst case a missing field leads to a field looking like
"/TLSv1.2/AES...", though usually a missing element still results
in a "-" in logs.
This will change the log format for users who already deployed the
2.5-dev versions (hence the medium level) but no released version
was using this format yet so there's no harm for stable deployments.
The reg-test was updated to check for "-" there since we don't send
SNI in reg-tests.
Link: https://www.mail-archive.com/haproxy@formilux.org/msg41410.html
Cc: William Lallemand <wlallemand@haproxy.org>
Its definition is enclosed inside an ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME
which is defined since OpenSSL 0.9.8. Having it conditioned like this
prevents us from using it by default in a log format, which could cause
an error on an old or exotic library.
Let's just always define it and make the sample fetch fail to return
anything on such libs instead.
Commit 3d2093af9 ("MINOR: connection: Add a connection error code sample
fetch") added these convenient sample-fetch functions but it appears that
due to a misunderstanding the redundant "conn" part was kept in their
name, causing confusion, since "fc" already stands for "front connection".
Let's simply call them "fc_err" and "bc_err" to match all other related
ones before they appear in a final release. The VTC they appeared in were
also updated, and the alpha sort in the keywords table updated.
Cc: William Lallemand <wlallemand@haproxy.org>
This directive is documented as being ignored if set in a defaults
section. But it is only mentionned in a small note in the configuration
manual. Thus, now, a warning is emitted. To do so, the errors handling in
parse_compression_options() function was slightly changed.
In addition, this directive is now documented apart from the other
compression directives. This way, it is clearly visible that it must not be
used in a defaults section.
In alloc_dst_address(), the client destination address must only be
retrieved when we are sure to use it. Most of time, this save a syscall to
getsockname(). It is not a bugfix in itself. But it revealed a bug in the
QUIC part. The CO_FL_ADDR_TO_SET flag is not set when the destination
address is create for anew quic client connection.
->frms_rwlock is an old lock supposed to be used when several threads
could handle the same connection. This is no more the case since this
commit:
"MINOR: quic: Attach the QUIC connection to a thread."
Add a buffer per QUIC connection. At this time the listener which receives
the UDP datagram is responsible of identifying the underlying QUIC connection
and must copy the QUIC packets to its buffer.
->pkt_list member has been added to quic_conn struct to enlist the packets
in the order they have been copied to the connection buffer so that to be
able to consume this buffer when the packets are freed. This list is locked
thanks to a R/W lock to protect it from concurent accesses.
quic_rx_packet struct does not use a static buffer anymore to store the QUIC
packets contents.
At this time we allocate an RX buffer by thread.
Also take the opportunity offered by this patch to rename TX related variable
names to distinguish them from the RX part.
jwt_parse_alg would mistakenly return JWT_ALG_NONE for algorithms "",
"n", "no" and "non" because of a strncmp misuse. It now sees them as
unknown algorithms.
No backport needed.
Cc: Tim Duesterhus <tim@bastelstu.be>
This patch renames all dns extra counters and stats functions, types and
enums using the 'resolv' prefix/suffixes.
The dns extra counter domain id used on cli was replaced by "resolvers"
instead of "dns".
The typed extra counter prefix dumping resolvers domain "D." was
also renamed "N." because it points counters on a Nameserver.
This was done to finish the split between "resolver" and "dns" layers
and to avoid further misunderstanding when haproxy will handle dns
load balancing.
This should not be backported.
This patch add a union and struct into dns_counter struct to split
application specific counters.
The only current existing application is the resolver.c layer but
in futur we could handle different application such as dns load
balancing with others specific counters.
This patch should not be backported.
Before this patch the sent error counter was increased
for each targeted nameserver as soon as we were unable to build
the query message into the trash buffer. But this counter is here
to count sent errors at dns.c transport layer and this error is not
related to a nameserver.
This patch stops to increase those counters and sent a log message
to signal the trash buffer size is not large enough to build the query.
Note: This case should not happen except if trash size buffer was
customized to a very low value.
The function was also re-worked to return -1 in this error case
as it was specified in comment. This function is currently
called at multiple point in resolver.c but return code
is still not yet handled. So to advert the user of the malfunction
the log message was added.
This patch should be backported on all versions including the
layer split between dns.c and resolver.c (v >= 2.4)
The sent messages counter was increased at both resolver.c and dns.c
layers.
This patch let the dns.c layer count the sent messages since this
layer handle a retry if transport layer is not ready (EAGAIN on udp
or tcp session ring buffer full).
This patch should be backported on all versions using a split of those
layers for resolving (v >=2.4)
Implement parsing for the server keyword 'ws'. This is used to configure
the mode of selection for websocket protocol. The configuration
documentation has been updated.
A new regtest has been created to test the proper behavior of the
keyword.
Handle properly websocket streams if the server uses an ALPN with both
h1 and h2. Add a new field h2_ws in the server structure. If set to off,
reuse is automatically disable on backend and ALPN is forced to http1.x
if possible. Nothing is done if on.
Implement a mechanism to be able to use a different http version for
websocket streams. A new server member <ws> represents the algorithm to
select the protocol. This can overrides the server <proto>
configuration. If the connection uses ALPN for proto selection, it is
updated for websocket streams to select the right protocol.
Three mode of selection are implemented :
- auto : use the same protocol between non-ws and ws streams. If ALPN is
use, try to update it to "http/1.1"; this is only done if the server
ALPN contains "http/1.1".
- h1 : use http/1.1
- h2 : use http/2.0; this requires the server to support RFC8441 or an
error will be returned by haproxy.
Add a new parameter force_mux_ops. This will be useful to specify an
alternative to the srv->mux_proto field. If non-NULL, it will be use to
force the mux protocol wether srv->mux_proto is set or not.
This argument will become useful to install a mux for non-standard
streams, most notably websocket streams.
Implement a new function to update the ALPN on an existing connection.
on an existing connection. The ALPN from the ssl context can be checked
to update the ALPN only if it is a subset of the context value.
This method will be useful to change a connection ALPN for websocket,
must notably if the server does not support h2 websocket through the
rfc8441 Extended Connect.
Define a new stream flag SF_WEBSOCKET and a new cs flag CS_FL_WEBSOCKET.
The conn-stream flag is first set by h1/h2 muxes if the request is a
valid websocket upgrade. The flag is then converted to SF_WEBSOCKET on
the stream creation.
This will be useful to properly manage websocket streams in
connect_server().
The RFC8441 was not respected by haproxy in regards with server support
for Extended CONNECT. The Extended CONNECT method was used to convert an
Upgrade header stream even if no SETTINGS_ENABLE_CONNECT_PROTOCOL was
received, which is forbidden by the RFC8441. In this case, the behavior
of the http/2 server is unspecified.
Fix this by flagging the connection on receiption of the RFC8441
settings SETTINGS_ENABLE_CONNECT_PROTOCOL. Extended CONNECT is thus only
be used if the flag is present. In the other case, the stream is
immediatly closed as there is no way to handle it in http/2. It results
in a http/1.1 502 or http/2 RESET_STREAM to the client side.
The protocol-upgrade regtest has been extended to test that haproxy does
not emit Extended CONNECT on servers without RFC8441 support.
It must be backported up to 2.4.
Add a state trace to report that a protocol upgrade is converted using
the rfc8441 Extended connect method. This is useful in regards with the
recent changes to improve http/2 websockets.
It is not useful to start a configuration where an invalid static string is
provided as the JWT algorithm. Better make the administrator aware of the
suspected typo by failing to start.
Session struct is already allocated when "tcp-request connection" rules
are evaluated so session-scoped variables turned out easy to support.
This resolves github issue #1408.
A long-standing issue was reported in issue #1215.
In short, var() was initially internally declared as returning a string
because it was not possible by then to return "any type". As such, users
regularly get trapped thinking that when they're storing an integer there,
then the integer matching method automatically applies. Except that this
is not possible since this is related to the config parser and is decided
at boot time where the variable's type is not known yet.
As such, what is done is that the output being declared as type string,
the string match will automatically apply, and any value will first be
converted to a string. This results in several issues like:
http-request set-var(txn.foo) int(-1)
http-request deny if { var(txn.foo) lt 0 }
not working. This is because the string match on the second line will in
fact compare the string representation of the variable against strings
"lt" and "0", none of which matches.
The doc says that the matching method is mandatory, though that's not
the case in the code due to that default string type being permissive.
There's not even a warning when no explicit match is placed, because
this happens very deep in the expression evaluator and making a special
case just for "var" can reveal very complicated.
The set-var() converter already mandates a matching method, as the
following will be rejected:
... if { int(12),set-var(txn.truc) 12 }
while this one will work:
... if { int(12),set-var(txn.truc) -m int 12 }
As such, this patch this modifies var() to match the doc, returning the
type "any", and mandating the matching method, implying that this bogus
config which does not work:
http-request set-var(txn.foo) int(-1)
http-request deny if { var(txn.foo) lt 0 }
will need to be written like this:
http-request set-var(txn.foo) int(-1)
http-request deny if { var(txn.foo) -m int lt 0 }
This *will* break some configs (and even 3 of our regtests relied on
this), but except those which already match string exclusively, all
other ones are already broken and silently fail (and one of the 3
regtests, the one on FIX, was bogus regarding this).
In order to fix existing configs, one can simply append "-m str"
after a "var()" in an ACL or "if" expression:
http-request deny unless { var(txn.jwt_alg) "ES" }
must become:
http-request deny unless { var(txn.jwt_alg) -m str "ES" }
Most commonly, patterns such as "le", "lt", "ge", "gt", "eq", "ne" in
front of a number indicate that the intent was to match an integer,
and in this case "-m int" would be desired:
tcp-response content reject if ! { var(res.size) gt 3800 }
ought to become:
tcp-response content reject if ! { var(res.size) -m int gt 3800 }
This must not be backported, but if a solution is found to at least
detect this exact condition in the generic expression parser and
emit a warning, this could probably help spot configuration bugs.
Link: https://www.mail-archive.com/haproxy@formilux.org/msg41341.html
Cc: Christopher Faulet <cfaulet@haproxy.com>
Cc: Tim Dsterhus <tim@bastelstu.be>
The kill list introduced in commit f766ec6b5 ("MEDIUM: resolvers: use a kill
list to preserve the list consistency") contains a bug. The deatch_row must
be initialized before calling resolv_process_responses() function. However,
this function is called for the dns code. The death_row is not visible from
the outside. So, it is possible to add a resolution in an uninitialized
death_row, leading to a crash.
But, with the current implementation, it is not possible to handle the
death_row in resolv_process_responses() function because, internally, the
kill list may be freed via a call to resolv_unlink_resolution(). At the end,
we are unable to determine all call chains to guarantee a safe use of the
kill list. It is a shameful observation, but unfortunatly true.
So, to make the fix simple, we track all calls to the public resolvers
api. A counter is incremented when we enter in the resolver code and
decremented when we leave it. This way, we are able to track the recursions
to init and release the kill list only once, at the edge.
Following functions are incrementing/decrementing the recurse counter:
* resolv_trigger_resolution()
* resolv_srvrq_expire_task()
* resolv_link_resolution()
* resolv_unlink_resolution()
* resolv_detach_from_resolution_answer_items()
* resolv_process_responses()
* process_resolvers()
* resolvers_finalize_config()
* resolv_action_do_resolve()
This patch should fix the issue #1404. It must be backported everywhere the
above commit was backported.
First of all, we must be careful here because this part was modified and
each time, this introduced a bug. But, in si_update_rx(), we must not
re-enables receives if the channel buffer cannot receive more
data. Otherwise the multiplexer will be wake up for nothing. Because the
stream is woken up when the multiplexer is waiting for more room to move on,
this may lead to a ping-pong loop between the stream and the mux.
Note that for now, it does not fix any known bug. All reported issues in
this area were fixed in another way.
This patch must be backported with a special care. Technically speaking, it
may be backported as far as 2.0.
A Host header must be present for http_update_host() to success.
htx_add_header(htx, ist("Host"), IST_NULL) was used but this is not a
good idea from a semantic point of view. It also tries to make a memcpy
with a len of 0, which is unrequired.
Use an ist("h") instead as a placeholder value.
This patch fixes bug #1439.
Some luaL_buffinit() call was done before the push of the variable name,
where it seems to work correctly with lua < 5.4.3, it brokes
systematically on this version.
This patch inverts the pushstring and the buffinit.
The http_auth_bearer sample fetch can take a header name as parameter,
in which case it will try to extract a Bearer value out of the given
header name instead of the default "Authorization" one. In this case,
the extraction would not have worked because of a misuse of strncasecmp.
This patch fixes this by replacing the standard string functions by ist
ones.
It also properly manages the multiple spaces that could be found between
the scheme and its value.
No backport needed, that's part of JWT which is only in 2.5.
Co-authored-by: Tim Duesterhus <tim@bastelstu.be>
As per RFC7235, there can be multiple spaces in the value of an
Authorization header, between the scheme and the actual authentication
parameters.
This can be backported to all stable versions since basic auth has almost
always been there.
When a tarpit action is performed, we must be sure to drain data from the
request channel. Otherwise, the mux on the frontend side may be blocked
because the request channel buffer is full.
This may lead to Two bugs. The first one is a HOL blocking on the H2
multiplexer. A tarpitted stream may block all the others because data are
not drained for the whole tarpit timeout. The second bug is a ping-pong loop
between the multiplexer and the stream. The mux is waiting for more space in
the channel buffer, so it wakes up the stream. And the stream systematically
re-enables receives.
This last part is not pretty clean and it will be addressed with another
fix. But draning request data is a good way to fix both bugs in same time.
This patch must be backported as far as 2.0. The legacy HTTP mode is
probably affected, but I don't know if same bugs may be experienced in this
mode.
When a requester is unlink from a resolution, by reading the code, we can
have this call chain:
_resolv_unlink_resolution(srv->resolv_requester)
resolv_detach_from_resolution_answer_items(resolution, requester)
resolv_srvrq_cleanup_srv(srv)
_resolv_unlink_resolution(srv->resolv_requester)
A loop on the resolution answer items is performed inside
resolv_detach_from_resolution_answer_items(). But by reading the code, it
seems possible to recursively unlink the same requester.
To avoid any loop at this stage, the requester clean up must be performed
before the call to resolv_detach_from_resolution_answer_items(). This way,
the second call to _resolv_unlink_resolution() does nothing and returns
immediately because the requester was already detached from the resolution.
This patch is related to the issue #1404. It must be backported as far as
2.2.
