Make the transport parameters be standlone as much as possible as
it consists only in encoding/decoding data into/from buffers.
Reduce the size of xprt_quic.h. Unfortunalety, I think we will
have to continue to include <xprt_quic-t.h> to use the trace API
into this module.
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
The new name mor eclearly indicates that a stream connector cannot make
any more progress because it needs room in the channel buffer, or that
it may be unblocked because the buffer now has more room available. The
testing function is sc_waiting_room(). This is mostly used by applets.
Note that the flags will change soon.
We're starting to propagate the stream connector's new name through the
API. Most call places of these functions that retrieve the channel or its
buffer are in applets. The local variable names are not changed in order
to keep the changes small and reviewable. There were ~92 uses of cs_ic(),
~96 of cs_oc() (due to co_get*() being less factorizable than ci_put*),
and ~5 accesses to the buffer itself.
This applies the change so that the applet code stops using ci_putchk()
and friends everywhere possible, for the much saferapplet_put*() instead.
The change is mechanical but large. Two or three functions used to have no
appctx and a cs derived from the appctx instead, which was a reminiscence
of old times' stream_interface. These were simply changed to directly take
the appctx. No sensitive change was performed, and the old (more complex)
API is still usable when needed (e.g. the channel is already known).
The change touched roughly a hundred of locations, with no less than 124
lines removed.
It's worth noting that the stats applet, the oldest of the series, could
get a serious lifting, as it's still very channel-centric instead of
propagating the appctx along the chain. Given that this code doesn't
change often, there's no emergency to clean it up but it would look
better.
This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
The command uses a pointer to the current proxy being dumped, one to the
current server being dumped, an optional ID of the only proxy to dump
(which is in fact used as a boolean), and a flag indicating if we're
doing a "show servers conn" or a "show servers state". Let's move all
this to a struct show_srv_ctx.
This makes use of the generic command context allocation so that the
appctx doesn't have to declare a specific one anymore. The context is
created during parsing.
The code still has room for improvement, such as in the "flags" field
where bits are hard-coded, but they weren't modified.
Commit e7f74623e ("MINOR: stats: don't output internal proxies (PR_CAP_INT)")
in 2.5 ensured we don't dump internal proxies on the stats page, but the
same is needed for "show backend", as since the addition of the HTTP client
it now appears there:
$ socat /tmp/sock1 - <<< "show backend"
# name
<HTTPCLIENT>
This needs to be backported to 2.5.
If the "close-spread-time" option is set to "infinite", active
connection closing during a soft-stop can be disabled. The 'connection:
close' header or the GOAWAY frame will not be added anymore to the
server's response and active connections will only be closed once the
clients disconnect. Idle connections will not be closed all at once when
the soft-stop starts anymore, and each idle connection will follow its
own timeout based on the multiple timeouts set in the configuration (as
is the case during regular execution).
This feature request was described in GitHub issue #1614.
This patch should be backported to 2.5. It depends on 'MEDIUM: global:
Add a "close-spread-time" option to spread soft-stop on time window'.
There were plenty of leftovers from old code that were never removed
and that are not needed at all since these files do not use any
definition depending on fcntl.h, let's drop them.
Almost all of our hash-based LB algorithms are implemented as special
cases of something that can now be achieved using sample expressions,
and some of them have adopted some options to adapt their behavior in
ways that could also be achieved using converters.
There are users who want to hash other parameters that are combined
into variables, and who set headers from these values and use
"balance hdr(name)" for this.
Instead of constantly implementing specific options and having users
hack around when they want a real hash, let's implement a native hash
mode that applies to a standard sample expression. This way, any
fetchable element (including variables) may be used to construct the
hash, even modified by any converter if desired.
Since the 2.5, it is possible to define TCP/HTTP ruleset in defaults
sections. However, rules defining a capture in defaults sections was not
properly handled because they was not shared with the proxies inheriting
from the defaults section. This led to crash when haproxy tried to store a
new capture.
So now, to fix the issue, when a new proxy is created, the list of captures
points to the list of its defaults section. It may be NULL or not. All new
caputres are prepended to this list. It is not a problem to share the same
defaults section between several proxies, because it is not altered and we
take care to not release it when corresponding proxies are freed but only
when defaults proxies are freed. To do so, defaults proxies are now
unreferenced at the end of free_proxy() function instead of the beginning.
This patch should fix the issue #1674. It must be backported to 2.5.
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
Flag to consider a stream as indepenent is now handled at the conn-stream
level. Thus SI_FL_INDEP_STR stream-int flag is replaced by CS_FL_INDEP_STR
conn-stream flags.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
The new 'close-spread-time' global option can be used to spread idle and
active HTTP connction closing after a SIGUSR1 signal is received. This
allows to limit bursts of reconnections when too many idle connections
are closed at once. Indeed, without this new mechanism, in case of
soft-stop, all the idle connections would be closed at once (after the
grace period is over), and all active HTTP connections would be closed
by appending a "Connection: close" header to the next response that goes
over it (or via a GOAWAY frame in case of HTTP2).
This patch adds the support of this new option for HTTP as well as HTTP2
connections. It works differently on active and idle connections.
On active connections, instead of sending systematically the GOAWAY
frame or adding the 'Connection: close' header like before once the
soft-stop has started, a random based on the remainder of the close
window is calculated, and depending on its result we could decide to
keep the connection alive. The random will be recalculated for any
subsequent request/response on this connection so the GOAWAY will still
end up being sent, but we might wait a few more round trips. This will
ensure that goaways are distributed along a longer time window than
before.
On idle connections, a random factor is used when determining the expire
field of the connection's task, which should naturally spread connection
closings on the time window (see h2c_update_timeout).
This feature request was described in GitHub issue #1614.
This patch should be backported to 2.5. It depends on "BUG/MEDIUM:
mux-h2: make use of http-request and keep-alive timeouts" which
refactorized the timeout management of HTTP2 connections.
Log servers are a real mess because:
- entries are duplicated using memcpy() without their strings being
reallocated, which results in these ones not being freeable every
time.
- a new field, ring_name, was added in 2.2 by commit 99c453df9
("MEDIUM: ring: new section ring to declare custom ring buffers.")
but it's never initialized during copies, causing the same issue
- no attempt is made at freeing all that.
Of course, running "haproxy -c" under ASAN quickly notices that and
dumps a core.
This patch adds the missing strdup() and initialization where required,
adds a new free_logsrv() function to cleanly free() such a structure,
calls it from the proxy when iterating over logsrvs instead of silently
leaking their file names and ring names, and adds the same logsrv loop
to the proxy_free_defaults() function so that we don't leak defaults
sections on exit.
It looks a bit entangled, but it comes as a whole because all this stuff
is inter-dependent and was missing.
It's probably preferable not to backport this in the foreseable future
as it may reveal other jokes if some obscure parts continue to memcpy()
the logsrv struct.
The server_id_hdr_name is already processed as an ist in various locations lets
also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The orgto_hdr_name is already processed as an ist in `http_process_request`,
lets also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The fwdfor_hdr_name is already processed as an ist in `http_process_request`,
lets also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The monitor_uri is already processed as an ist in `http_wait_for_request`, lets
also just store it as such.
see 0643b0e7e ("MINOR: proxy: Make `header_unique_id` a `struct ist`") for a
very similar past commit.
The unsafe conn-stream API (__cs_*) is now used when we are sure the good
endpoint or application is attached to the conn-stream. This avoids compiler
warnings about possible null derefs. It also simplify the code and clear up
any ambiguity about manipulated entities.
As reported by Coverity in issue #1568, a missing initialization of the
error message pointer in parse_new_proxy() may result in displaying garbage
or crashing in case of memory allocation error when trying to create a new
proxy on startup.
This should be backported to 2.4.
Since recent changes related to the conn-stream/stream-interface
refactoring, GCC reports potential null pointer dereferences when we get the
appctx, the stream or the stream-interface from the conn-strem. Of course,
depending on the time, these entities may be null. But at many places, we
know they are defined and it is safe to get them without any check. Thus, we
use ALREADY_CHECKED() macro to silent these warnings.
Note that the refactoring is unfinished, so it is not a real issue for now.
To be able to move the stream-interface from the stream to the conn-stream,
all access to the SI is done via the conn-stream. This patch is limited to
the proxy part.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
Create a new structure li_per_thread. This is uses as an array in the
listener structure, with an entry allocated per thread. The new function
li_init_per_thr is responsible of the allocation.
For now, li_per_thread contains fields only useful for QUIC listeners.
As such, it is only allocated for QUIC listeners.
Avoid closing idle connections if a soft stop is in progress.
By default, idle connections will be closed during a soft stop. In some
environments, a client talking to the proxy may have prepared some idle
connections in order to send requests later. If there is no proper retry
on write errors, this can result in errors while haproxy is reloading.
Even though a proper implementation should retry on connection/write
errors, this option was introduced to support back compat with haproxy <
v2.4. Indeed before v2.4, we were waiting for a last request to be able
to add a "connection: close" header and advice the client to close the
connection.
In a real life example, this behavior was seen in AWS using the ALB in
front of a haproxy. The end result was ALB sending 502 during haproxy
reloads.
This patch was tested on haproxy v2.4, with a regular reload on the
process, and a constant trend of requests coming in. Before the patch,
we see regular 502 returned to the client; when activating the option,
the 502 disappear.
This patch should help fixing github issue #1506.
In order to unblock some v2.3 to v2.4 migraton, this patch should be
backported up to v2.4 branch.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
[wt: minor edits to the doc to mention other options to care about]
Signed-off-by: Willy Tarreau <w@1wt.eu>
It is now possible to have TCP/HTTP rules and ACLs defined in defaults
sections. So we must try to release corresponding lists when a default proxy
is destroyed.
No backport needed.
TCP and HTTP rules can now be defined in defaults sections, but only those
with a name. Because these rules may use conditions based on ACLs, ACLs can
also be defined in defaults sections.
However there are some limitations:
* A defaults section defining TCP/HTTP rules cannot be used by a defaults
section
* A defaults section defining TCP/HTTP rules cannot be used bu a listen
section
* A defaults sections defining TCP/HTTP rules cannot be used by frontends
and backends at the same time
* A defaults sections defining 'tcp-request connection' or 'tcp-request
session' rules cannot be used by backends
* A defaults sections defining 'tcp-response content' rules cannot be used
by frontends
The TCP request/response inspect-delay of a proxy is now inherited from the
defaults section it uses. For now, these rules are only parsed. No evaluation is
performed.
The PR_FL_READY flags must now be set on a proxy at the end of the
configuration validity check to notify it is fully configured and may be
safely used.
For now there is no real usage of this flag. But it will be usefull for
referenced default proxies to finish their configuration only once.
This patch is mandatory to support TCP/HTTP rules in defaults sections.
A proxy may now references the defaults section it is used. To do so, a
pointer on the default proxy was added in the proxy structure. And a
refcount must be used to track proxies using a default proxy. A default
proxy is destroyed iff its refcount is equal to zero and when it drops to
zero.
All this stuff must be performed during init/deinit staged for now. All
unreferenced default proxies are removed after the configuration parsing.
This patch is mandatory to support TCP/HTTP rules in defaults sections.
This change is required to support TCP/HTTP rules in defaults sections. The
'disabled' bitfield in the proxy structure, used to know if a proxy is
disabled or stopped, is replaced a generic bitfield named 'flags'.
PR_DISABLED and PR_STOPPED flags are renamed to PR_FL_DISABLED and
PR_FL_STOPPED respectively. In addition, everywhere there is a test to know
if a proxy is disabled or stopped, there is now a bitwise AND operation on
PR_FL_DISABLED and/or PR_FL_STOPPED flags.
.disabled field in the proxy structure is documented to be a bitfield. So
use it as a bitfield. This change was introduced to the 2.5, by commit
8e765b86f ("MINOR: proxy: disabled takes a stopping and a disabled state").
No backport is needed except if the above commit is backported.
The last 3 fields were 3 list heads that are per-thread, and which are:
- the pool's LRU head
- the buffer_wq
- the streams list head
Moving them into thread_ctx completes the removal of dynamic elements
from the struct thread_info. Now all these dynamic elements are packed
together at a single place for a thread.
We'll need to improve the API to pass other arguments in the future, so
let's start to adapt better to the current use cases. task_new() is used:
- 18 times as task_new(tid_bit)
- 18 times as task_new(MAX_THREADS_MASK)
- 2 times with a single bit (in a loop)
- 1 in the debug code that uses a mask
This patch provides 3 new functions to achieve this:
- task_new_here() to create a task on the calling thread
- task_new_anywhere() to create a task to be run anywhere
- task_new_on() to create a task to run on a specific thread
The change is trivial and will allow us to later concentrate the
required adaptations to these 3 functions only. It's still possible
to call task_new() if needed but a comment was added to encourage the
use of the new ones instead. The debug code was not changed and still
uses it.
