On the mailing list, seri0528@naver.com reported an issue when
using balance url_param or balance uri. The request would sometimes
stall forever.
Cyril Bonté managed to reproduce it with the configuration below :
listen test :80
mode http
balance url_param q
hash-type consistent
server s demo.1wt.eu:80
and found it appeared with this commit : 80a92c0 ("BUG/MEDIUM: http:
don't start to forward request data before the connect").
The bug is subtle but real. The problem is that the HTTP request
forwarding analyzer refrains from starting to parse the request
body when some LB algorithms might need the body contents, in order
to preserve the data pointer and avoid moving things around during
analysis in case a redispatch is later needed. And in order to detect
that the connection establishes, it watches the response channel's
CF_READ_ATTACHED flag.
The problem is that a request analyzer is not subscribed to a response
channel, so it will only see changes when woken for other (generally
correlated) reasons, such as the fact that part of the request could
be sent. And since the CF_READ_ATTACHED flag is cleared once leaving
process_session(), it is important not to miss it. It simply happens
that sometimes the server starts to respond in a sequence that validates
the connection in the middle of process_session(), that it is detected
after the analysers, and that the newly assigned CF_READ_ATTACHED is
not used to detect that the request analysers need to be called again,
then the flag is lost.
The CF_WAKE_WRITE flag doesn't work either because it's cleared upon
entry into process_session(), ie if we spend more than one call not
connecting.
Thus we need a new flag to tell the connection initiator that we are
specifically interested in being notified about connection establishment.
This new flag is CF_WAKE_CONNECT. It is set by the requester, and is
cleared once the connection succeeds, where CF_WAKE_ONCE is set instead,
causing the request analysers to be scanned again.
For future versions, some better options will have to be considered :
- let all analysers subscribe to both request and response events ;
- let analysers subscribe to stream interface events (reduces number
of useless calls)
- change CF_WAKE_WRITE's semantics to persist across calls to
process_session(), but that is different from validating a
connection establishment (eg: no data sent, or no data to send)
The bug was introduced in 1.5-dev23, no backport is needed.
Till now we used to return a pointer to a rule, but that makes it
complicated to later add support for registering new actions which
may fail. For example, the redirect may fail if the response is too
large to fit into the buffer.
So instead let's return a verdict. But we needed the pointer to the
last rule to get the address of a redirect and to get the realm used
by the auth page. So these pieces of code have moved into the function
and they produce a verdict.
Last fix did address the issue for inlined patterns, but it was not
enough because the flags are lost as well when updating patterns
dynamically over the CLI.
Also if the same file was used once with -i and another time without
-i, their references would have been merged and both would have used
the same matching method.
It's appear that the patterns have two types of flags. The first
ones are relative to the pattern matching, and the second are
relative to the pattern storage. The pattern matching flags are
the same for all the patterns of one expression. Now they are
stored in the expression. The storage flags are information
returned by the pattern mathing function. This information is
relative to each entry and is stored in the "struct pattern".
Now, the expression matching flags are forwarded to the parse
and index functions. These flags are stored during the
configuration parsing, and they are used during the parse and
index actions.
This issue was introduced in dev23 with the major pattern rework,
and is a continuation of commit a631fc8 ("BUG/MAJOR: patterns: -i
and -n are ignored for inlined patterns"). No backport is needed.
These flags are only passed to pattern_read_from_file() which
loads the patterns from a file. The functions used to parse the
patterns from the current line do not provide the means to pass
the pattern flags so they're lost.
This issue was introduced in dev23 with the major pattern rework,
and was reported by Graham Morley. No backport is needed.
Using the previous callback, it's trivial to block the heartbeat attack,
first we control the message length, then we emit an SSL error if it is
out of bounds. A special log is emitted, indicating that a heartbleed
attack was stopped so that they are not confused with other failures.
That way, haproxy can protect itself even when running on an unpatched
SSL stack. Tests performed with openssl-1.0.1c indicate a total success.
Users have seen a huge increase in the rate of SSL handshake failures
starting from 2014/04/08 with the release of the Heartbleed OpenSSL
vulnerability (CVE-2014-0160). Haproxy can detect that a heartbeat
was received in the incoming handshake, and such heartbeats are not
supposed to be common, so let's log a different message when a
handshake error happens after a heartbeat is detected.
This patch only adds the new message and the new code.
The http_(res|req)_keywords_register() functions allow to register
new keywords.
You need to declare a keyword list:
struct http_req_action_kw_list test_kws = {
.scope = "testscope",
.kw = {
{ "test", parse_test },
{ NULL, NULL },
}
};
and a parsing function:
int parse_test(const char **args, int *cur_arg, struct proxy *px, struct http_req_rule *rule, char **err)
{
rule->action = HTTP_REQ_ACT_CUSTOM_STOP;
rule->action_ptr = action_function;
return 0;
}
http_req_keywords_register(&test_kws);
The HTTP_REQ_ACT_CUSTOM_STOP action stops evaluation of rules after
your rule, HTTP_REQ_ACT_CUSTOM_CONT permits the evaluation of rules
after your rule.
This patch allows manipulation of ACL and MAP content thanks to any
information available in a session: source IP address, HTTP request or
response header, etc...
It's an update "on the fly" of the content of the map/acls. This means
it does not resist to reload or restart of HAProxy.
Finn Arne Gangstad suggested that we should have the ability to break
keep-alive when the target server has reached its maxconn and that a
number of connections are present in the queue. After some discussion
around his proposed patch, the following solution was suggested : have
a per-proxy setting to fix a limit to the number of queued connections
on a server after which we break keep-alive. This ensures that even in
high latency networks where keep-alive is beneficial, we try to find a
different server.
This patch is partially based on his original proposal and implements
this configurable threshold.
All the code inherited from version 1.1 still holds a lot ot sessions
called "t" because in 1.1 they were tasks. This naming is very annoying
and sometimes even confusing, for example in code involving tables.
Let's get rid of this once for all and before 1.5-final.
Nothing changed beyond just carefully renaming these variables.
This basically reimplements commit f3221f9 ("MEDIUM: stats: add support
for HTTP keep-alive on the stats page") which was reverted by commit
51437d2 after Igor Chan reported a broken stats page caused by the bug
fix by previous commit.
In order to avoid abusively relying on buf->o to guess how many bytes to
rewind during a redispatch, we now clear msg->sov. Thus the meaning of this
field is exactly "how many bytes of headers are left to be forwarded". It
is still possible to rewind because msg->eoh + msg->eol equal that value
before scheduling the forwarding, so we can always subtract them.
http_body_rewind() returns the number of bytes to rewind before buf->p to
find the message's body. It relies on http_hdr_rewind() to find the beginning
and adds msg->eoh + msg->eol which are always safe.
http_data_rewind() does the same to get the beginning of the data, which
differs from above when a chunk is present. It uses the function above and
adds msg->sol.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_uri_rewind() returns the number of bytes to rewind before buf->p to
find the URI. It relies on http_hdr_rewind() to find the beginning and
is just here to simplify operations.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_hdr_rewind() returns the number of bytes to rewind before buf->p to
find the beginning of headers. At the moment it's not exact as it still
relies on buf->o, assuming that no other data from a past message were
pending there, but it's what was done till there.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_body_bytes() returns the number of bytes of the current message body
present in the buffer. It is compatible with being called before and after
the headers are forwarded.
This is done to centralize further ->sov changes.
There are still some pending issues in the gzip compressor, and fixing
them requires a better handling of intermediate parsing states.
Another issue to deal with is the rewinding of a buffer during a redispatch
when a load balancing algorithm involves L7 data because the exact amount of
data to rewind is not clear. At the moment, this is handled by unwinding all
pending data, which cannot work in responses due to pipelining.
Last, having a first analysis which parses the body and another one which
restarts from where the parsing was left is wrong. Right now it only works
because we never both parse and transform in the same direction. But that
is wrong anyway.
In order to address the first issue, we'll have to use msg->eoh + msg->eol
to find the end of headers, and we still need to store the information about
the forwarded header length somewhere (msg->sol might be reused for this).
msg->sov may only be used for the start of data and not for subsequent chunks
if possible. This first implies that we stop sharing it with header length,
and stop using msg->sol there. In fact we don't need it already as it is
always zero when reaching the HTTP_MSG_BODY state. It was only updated to
reflect a copy of msg->sov.
So now as a first step into that direction, this patch ensure that msg->sol
is never re-assigned after being set to zero and is not used anymore when
we're dealing with HTTP processing and forwarding. We'll later reuse it
differently but for now it's secured.
The patch does nothing magic, it only removes msg->sol everywhere it was
already zero and avoids setting it. In order to keep the sov-sol difference,
it now resets sov after forwarding data. In theory there's no problem here,
but the patch is still tagged major because that code is complex.
One of the issues we face when we need to either forward headers only
before compressing, or rewind the stream during a redispatch is to know
the proper length of the request headers. msg->eoh always has the total
length up to the last CRLF, and we never know whether the request ended
with a single LF or a standard CRLF. This makes it hard to rewind the
headers without explicitly checking the bytes in the buffer.
Instead of doing so, we now use msg->eol to carry the length of the last
CRLF (either 1 or 2). Since it is not modified at all after HTTP_MSG_BODY,
and was only left in an undefined state, it is safe to use at any moment.
Thus, the complete header length to forward or to rewind now is always
msg->eoh + msg->eol.
This is the continuation of previous patch. Now that full buffers are
not rejected anymore, let's wait for at least the advertised chunk or
body length to be present or the buffer to be full. When either
condition is met, the message processing can go forward.
Thus we don't need to use url_param_post_limit anymore, which was passed
in the configuration as an optionnal <max_wait> parameter after the
"check_post" value. This setting was necessary when the feature was
implemented because there was no support for parsing message bodies.
The argument is now silently ignored if set in the configuration.
The function addr_to_stktable_key doesn't consider the expected
type of key. If the stick table key is based on IPv6 addresses
and the input is IPv4, the returned key is IPv4 adddress and his
length is 4 bytes, while is expected 16 bytes key.
This patch considers the expected key and try to convert IPv4 to
IPv6 and IPv6 to IPv4 according with the expected key.
This fixes the bug reported by Apollon Oikonomopoulos.
This bug was introduced somewhere in the 1.5-dev process.
When compiled with USE_GETADDRINFO, make sure we use getaddrinfo(3) to
perform name lookups. On default dual-stack setups this will change the
behavior of using IPv6 first. Global configuration option
'nogetaddrinfo' can be used to revert to deprecated gethostbyname(3).
Commit 6f7203d ("MEDIUM: pattern: add prune function") introduced an
array of functions pat_prune_fcts[] but unfortunately declared it in
pattern.h without marking it "extern", resulting in each file including
it having its own copy.
The cfgparse.c file becomes huge, and a large part of it comes from the
server keyword parser. Since the configuration is a bit more modular now,
move this parser to server.c.
This patch also moves the check of the "server" keyword earlier in the
supported keywords list, resulting in a slightly faster config parsing
for configs with large numbers of servers (about 10%).
No functional change was made, only the code was moved.
We have a use case where we look up a customer ID in an HTTP header
and direct it to the corresponding server. This can easily be done
using ACLs and use_backend rules, but the configuration becomes
painful to maintain when the number of customers grows to a few
tens or even a several hundreds.
We realized it would be nice if we could make the use_backend
resolve its name at run time instead of config parsing time, and
use a similar expression as http-request add-header to decide on
the proper backend to use. This permits the use of prefixes or
even complex names in backend expressions. If no name matches,
then the default backend is used. Doing so allowed us to get rid
of all the use_backend rules.
Since there are some config checks on the use_backend rules to see
if the referenced backend exists, we want to keep them to detect
config errors in normal config. So this patch does not modify the
default behaviour and proceeds this way :
- if the backend name in the use_backend directive parses as a log
format rule, it's used as-is and is resolved at run time ;
- otherwise it's a static name which must be valid at config time.
There was the possibility of doing this with the use-server directive
instead of use_backend, but it seems like use_backend is more suited
to this task, as it can be used for other purposes. For example, it
becomes easy to serve a customer-specific proxy.pac file based on the
customer ID by abusing the errorfile primitive :
use_backend bk_cust_%[hdr(X-Cust-Id)] if { hdr(X-Cust-Id) -m found }
default_backend bk_err_404
backend bk_cust_1
errorfile 200 /etc/haproxy/static/proxy.pac.cust1
Signed-off-by: Bertrand Jacquin <bjacquin@exosec.fr>
This patch permit to register new sections in the haproxy's
configuration file. This run like all the "keyword" registration, it is
used during the haproxy initialization, typically with the
"__attribute__((constructor))" functions.
The function url2sa() converts faster url like http://<ip>:<port> in a
struct sockaddr_storage. This patch add:
- the https support
- permit to return the length parsed
- support IPv6
- support DNS synchronous resolution only during start of haproxy.
The faster IPv4 convertion way is keeped. IPv6 is slower, because I use
the standard IPv6 parser function.
This function it is used for dynamically update all the patterns
attached to one file. This function is atomic. All parsing or indexation
failures are reported in the haproxy logs.
This patch replace a lot of pointeur by pattern matching identifier. If
the declared ACL use all the predefined pattern matching functions, the
register function gets the functions provided by "pattern.c" and
identified by the PAT_LATCH_*.
In the case of the acl uses his own functions, they can be declared, and
the acl registration doesn't change it.
This flag is no longer used. The last place using this, are the display
of the result of pattern matching in the cli command "get map" or "get
acl".
The first parameter of this command is the reference of the file used to
perform the lookup.
The function str2net runs DNS resolution if valid ip cannot be parsed.
The DNS function used is the standard function of the libc and it
performs asynchronous request.
The asynchronous request is not compatible with the haproxy
archictecture.
str2net() is used during the runtime throught the "socket".
This patch remove the DNS resolution during the runtime.
The pointer <regstr> is only used to compare and identify the original
regex string with the patterns. Now the patterns have a reference map
containing this original string. It is useless to store this value two
times.
This patch adds new display type. This display returns allocated string,
when the string is flush into buffers, it is freed. This permit to
return the content of "memprintf(err, ...)" messages.
The pat_ref_add functions has changed to return error.
The format of the acl file are not the same than the format of the map
files. In some case, the same file can be used, but this is ambiguous
for the user because the patterns are not the expected.
The acl and map function do the same work with the file parsing. This
patch merge these code in only one.
Note that the function map_read_entries_from_file() in the file "map.c"
is moved to the the function pat_ref_read_from_file_smp() in the file
"pattern.c". The code of this function is not modified, only the the
name and the arguments order has changed.
The find_smp search the smp using the value of the pat_ref_elt pointer.
The pat_find_smp_* are no longer used. The function pattern_find_smp()
known all pattern indexation, and can be found
