Add dev-python/docutils, dev-util/patchutils to hard-host-depends.
Without adding those in the SDK, the new package dev-util/bpftool would
end up pulling in the new dependencies into the production images, which
should not happen.
SDK bootstrap is failing with:
Message: sbat-distro (from ID):
../systemd-stable-250.3/src/boot/efi/meson.build:189:24: ERROR: Problem encountered: Required sbat-distro option not set and autodetection failed
The gnuefi USE flag controls whether bootctl and systemd-boot are built, but we
only need those on the target. Currently the USE flag is set for SDK as well,
so move it to coreos/targets/generic.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
Add missing entries to passwd and group.
Updated netperf needs netperf user and group. Updated systemd needs
various systemd users and groups. Dnsmasq also seems to require its
own user/group.
All this is added to prevent systemd-sysusers adding these to
/etc/passwd. And systemd-sysusers adds these, because the updated
user/group eclass in portage-stable now drops configuration files into
/usr/lib/sysusers.d. Maybe at some point we will switch over to
(patched?) systemd-sysusers, so this catch-up game won't be necessary,
but we are not there yet.
This includes the `auditd` binary and systemd unit as part of the
distro. While journald is also able to handle logs from the linux audit
subsystem, auditd provides audit-specific capabilities that are
necessary in deployments subject to regulatory compliance.
For one, an administrator is able to configure audit log writing policy
to ensure that logs land on disk and nothing is missed (`flush`). We
wouldn't want such policy through journald as it woudl sync and ensure
all logs which might be undesirable and too resource intensive. In
short, this allows us to configure different management policies for
audit logs compared to general logs.
It allows us to explicitly configure the node's reaction to errors such
as the disk beign full, the disk having other issues or space constraints.
While Flatcar is not Common Criteria certified which would require the
system to shut down if audit logs present issues (not written or
collected), some FedRAMP environments do require actions such as
notifications (which could be achieved via syslog). This can be
explicitly done with auditd as well.
Co-authored-by: Kai Lüke <pothos@users.noreply.github.com>
- Consolidate them (so enabling selinux and disabling hybrid cgroups
was moved).
- Remove outdated masks (arm64 does not mask any use flags any more)
and use flags (ssl was replaced in favor of +openssl and gnutls,
introspection is gone).
- Add gnuefi (for bootctl, earlier it was built if we requested
general efi support, now it's built when support also for gnu-efi is
requested).
Fix build issues when building firmware 20220209 by bumping the cxbg4
firmware version to 1.26.6.0. Without that, build fails like:
```
* Scanning for files required by 5.15.22-flatcar
* Missing firmware: cxgb4/t6fw.bin (cxgb4.ko.xz)
* Missing firmware: cxgb4/t5fw.bin (cxgb4.ko.xz)
* Missing firmware: cxgb4/t4fw.bin (cxgb4.ko.xz)
```
As gcc 10 or newer defaults to `-fno-common`, we need to define only
once in a *.c file, instead of *.h that can be imported multiple times
by *.c files.
See also https://github.com/vmware/open-vmdk/pull/13.
- Add the tmpfiles configuration for populating /var
- Add service compatibility symlinks (maybe time to drop them)
- Drop moving a binary from /usr/sbin to /sbin
- Drop populating /etc and /var
- Drop pkg_postinst
Based on commit c232e24562cfecd53cb281330e2900fcc30006f7.
Update net-fs/nfs-utils to 2.5.4-r3, as needed by gcc 10.
Without that update, build fails like:
```
/usr/libexec/gcc/x86_64-cros-linux-gnu/ld:
../../support/export/libexport.a(xtab.o):.../support/export/xtab.c:32:
multiple definition of `v4root_needed';
mountd-v4root.o:.../utils/mountd/v4root.c:31: first defined here
```
Waagent ejects the provisioning dvd, but this causes the /dev/sr0 drive
to be in a state where util-linux probing it causes the kernel to spam
"unaligned transfer" messages. This is fixed in util-linux main branch,
but it will be a while until this is released.
Create a symlink from 'eject' to '/bin/true' and modify the unit's PATH
environment variable so that this symlink is found before the eject
binary.
Additionally I added the oem python directory to PATH, so that waagent
can be start directly. This should be enough so that messages from
waagent in the journal are prefixed with 'waagent' and not 'python'.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
This new downstream patch disables the ManageForeignRoutes and
ManageForeignRoutingPolicyRules systemd-netword settings by default to
ensure that CNIs don't get their routes or routing policy rules
discarded on network reconfiguration events.
https://github.com/flatcar-linux/Flatcar/issues/620
With this kernel config, users can boot with fips=1 set in
`/usr/share/oem/grub.cfg`:
```
set linux_append="fips=1"
```
Which triggers various behaviors, for FIPS 200 certification.
with this config compiled in, and that boot parameter, users can can
that fips is enabled with:
```
flatcar ~ # cat /proc/sys/crypto/fips_enabled
1
```
- unmask amd64 and arm64
- take care of nscd.conf via tmpfiles, add files/nscd-conf.tmpfiles.
- don't run sanity checks in pkg_pretend to prevent gcc checks when
only the binary package is installed.
- comment out 'dostrip -x' to force the OS image binaries to be stripped
- remove everything glibc wants to put under /etc since we use
baselayout to provide that
- apply duktape patchset from https://gitlab.freedesktop.org/polkit/polkit/-/merge_requests/97
`.gitlab-ci.yml` patch has been removed since file is not shipped in
archive.
- fix config install paths, use systemd-tmpfiles (All configs should
be installed to /usr and tmpfiles should be used to create and fix
directory permissions instead of the ebuild's postinst.)
Signed-off-by: Mathieu Tortuyaux <mtortuyaux@microsoft.com>
upstream has masked openssl-3 for tracking build failures. Since we are
not impacted by this failures, we can safely unmask openssl-3.
See: https://github.com/flatcar-linux/Flatcar/issues/418 for Flatcar's
dependencies.
Signed-off-by: Mathieu Tortuyaux <mtortuyaux@microsoft.com>
- drop `pkg_postint`
- create `/etc/ssl` with tmpfiles
- remove unecessary files
- mark openssl as stable for arm64 and amd64
Signed-off-by: Mathieu Tortuyaux <mtortuyaux@microsoft.com>
We used to keep the package in overlay, because we dropped one Gentoo
patch to avoid some failures when applying updates when updating
payloads. This issue was fixed in bzip2 in a smarter way - we know
this, because we used 1.0.8 version with the fix and we didn't have
any problems so far. No point in keeping the package in overlay then.
root needs to be specified with -p instead of -S.
The policy dir (-S) defaults to (-p) + /var/lib/selinux/ + (-s).
Picked from upstream: 54a8322d18
Closes: https://github.com/flatcar-linux/Flatcar/issues/596
Signed-off-by: Mathieu Tortuyaux <mtortuyaux@microsoft.com>
The mirror-calico workflow has been failing because it currently determines
version=v3.22.0-0.dev-typha, which is not the tag used by the individual
container images. Rewrite the version logic to determine the version based on
what is in the tigera operator manifest. This is the same manifest that we use
to deploy calico in mantle.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
The entries added in changelog/security/ do not follow our existing
security section in the release notes:
https://www.flatcar.org/releases/#release-3033.2.0
Document the structure and an example to use the right format that we
need for release note generation.
The net-misc/iputils package never provided the traceroute binary,
only traceroute6, which is probably why the use flag got renamed to
traceroute6 too.
It was removed from Gentoo and with updated profiles, the build
started to fail with:
USE flag 'elibc_uclibc' referenced in conditional 'elibc_uclibc?' is
not in IUSE
We rely on this setting to make iPXE booting work on EFI platforms. In iPXE we
use 2 initramfs': the kernel builtin one and a pxe specific one that contains
the contents of the usr partition. This appears to rely on the EFI stub, which
unpacks the second one based on the passed commandline parameter (initrd=).
This affects arm64 kernels after v5.11 because of this commit:
6edcf9dc2e
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
The changelog entries should be directly used for the release notes,
thus they need to be short and hold only information relevant to the
end user, and should be in the markdown bullet point format.
The used changelog entry format in
https://github.com/flatcar-linux/coreos-overlay/pull/1502 is not really
useful for the release notes. This paragraph is good for the PR
description or a commit message, but here should be a bullet point for
the release notes.
Replace the paragraph by a release notes bullet point.
All runs of the GitHub Action to update the kernel used the same
changelog name, which is a bit confusing when comparing the releases.
Append the version to the filename to avoid using the same name for the
maintenance updates of a channel releases and for the introduction of a
kernel update in main.
Unlike with Kernel 5.10, dracut does not automatically install `loop.ko`
with Kernel 5.15.
Explicitly install the loop module from the dracut command line.
Pulls in https://github.com/flatcar-linux/bootengine/pull/32
`net-libs/libnetfilter_cthelper` needs CONFIG_NF_CT_NETLINK_HELPER.
CONFIG_NET_VRF was requested by a user. CONFIG_KEY_DH_OPERATIONS is
useful for `sys-apps/keyutils`. Rest of the added configs are
dependencies.
enables ELF support to e.g. allow tc to handle BPF filters.
It has been dropped in this commit: 406576c5e5
Signed-off-by: Mathieu Tortuyaux <mtortuyaux@microsoft.com>
It happens that kernel update PRs are created faster than we merge
them. In such case we create version gaps in the changelog. Remedy
that by adding links to all the released kernel versions between the
current one and the just released one.
This pulls in https://github.com/flatcar-linux/init/pull/56
to find a generic way of preventing conflicts with CNI interfaces that
shouldn't use DHCP and were matched by name to be set Unmanaged.
Add xml USE flag for dev-lang/python to avoid build failures during SDK
stage2. We need to add that to BOOTSTRAP_USE, not ordinary USE flags:
```
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/setuptools-57.5.0::portage-stable[python_targets_python3_9]
# required by dev-python/pyparsing-2.4.7-r1::portage-stable
# required by dev-python/packaging-21.0::portage-stable
# required by dev-python/setuptools_scm-6.3.2::portage-stable
>=dev-lang/python-3.9.8 xml
```
- unmask amd64 and arm64
- take care of nscd.conf via tmpfiles, add files/nscd-conf.tmpfiles.
- don't run sanity checks in pkg_pretend to prevent gcc checks when
only the binary package is installed.
- comment out 'dostrip -x' to force the OS image binaries to be stripped
- remove everything glibc wants to put under /etc since we use
baselayout to provide that
- Make BDEPEND independent from DEPEND (The `BDEPEND` is a
build-time requirement, so it should not be included in the whole
`DEPEND` list. If it does, an installation of `sys-auth/sssd`
causes other dependencies to be installed not only in the
`/build`, but also under the SDK. That's not what we want, so we
need to exclude `BDEPEND` from the list.)
- Move runstatedir option from configure to make (Now that the
upstream sssd 2.3.1 does not support `--runstatedir` option from
its configure script, we need to remove the option, to unblock the
configure issue like `unrecognized option --runstatedir`. Instead
we need to pass `runstatedir=` to emake commands.)
- Disable realm check for nsupdate (At the moment bind-tools does
not enable `gssapi`, so its `nsupdate` tool is also not able to
run `realm` command. As a result, configure script of `sssd` fails
when running `echo realm | nsupdate`, like `syntax error`.
To avoid such issues, we need to disable the nsupdate check for
now. After we could enable `gssapi` for the SDK correctly, we can
bring back the nsupdate check in the future.)
- Add patch for CVE-2021-3621
- Set the conf dir path explicitly (Without passing the
--with-systemdconfdir flag, the configure script will query
pkg-config for the directory itself. In the cross-compilation
setup that we have, this will result in a path sysroot prepended
to the path twice. systemd.eclass has a workaround for this issue,
but it does not provide an elegant getter of the system
configuration directory, thus we call `_systemd_get_dir`
ourselves.)
- Make it compatible with newer python versions.
- apply duktape patchset from
https://gitlab.freedesktop.org/polkit/polkit/-/merge_requests/35
(this should be re-fetched from the above MR when forward-porting
to updated polkit versions.)
- fix config install paths, use systemd-tmpfiles (All configs should
be installed to /usr and tmpfiles should be used to create and fix
directory permissions instead of the ebuild's postinst.)
- Carry over our custom tmpfiles and securetty files
- Remove /etc files and install them to /usr, use tmpfiles
- Switch /etc/login.defs edits to /usr/share/shadow/login.defs
- Drop moving passwd out of /usr since we don't have split-usr
- Drop pkg_postinst
- run sshd (and child) as unconfined_t
- add init.patch to allow execute_no_trans,map and exec from init to
unconfined
- add AVC patch for local login and journald
- add python[lxml] to BDEPEND (not pulled through policycoreutils
any more due to our changes there)
- Check out our previous ntp.conf and service units
- Disable USE=threads
- Add USE=perl, disabled to skip the scripts subdir
- Do the /etc -> /usr/share + tmpfiles dance for ntp.conf
- Drop unused init scripts and pkg_postinst
- Add a minimal USE flag for only installing libraries
- Change the Perl and Python run-time deps to build-time only
- Drop a bunch of dependencies with broken cross-compilation
- Enable using bundled libraries in their place
- Disable building libraries requiring Python
- Use EAPI7
- Move libsxlt and stylesheets to BDEPEND
- Introduce some USE flags, so we don't install some tools we don't
need
- Limit the size of bundled libraries
- Make it compatible with newer python versions
- Bump to r2 because of updating EAPI to 7
- Add the tmpfiles configuration for populating /var
- Add service compatibility symlinks (maybe time to drop them)
- Drop moving a binary from /usr/sbin to /sbin
- Drop populating /etc and /var
- Drop pkg_postinst
There is no minimal use flag any more, but it was more or less the
same as no daemon and no update drive database. We also disable
systemd integration, because it's only related to the daemon
functionality that we disabled.
The old version of the package didn't have a keyword for arm64. We
just updated it and it's stable for arm64 too, rendering the entry in
accept_keyword unnecessary.
The policycoreutils ebuild calls `semodule` in postinst to update SELinux stores.
It does not, however, tells `semodule` the correct ROOT to use, so builds that go into `/build/[arch]-usr` end up updating the SDK's store.
Fixes
libsemanage.semanage_commit_sandbox: Error while renaming /var/lib/selinux/targeted/active to /var/lib/selinux/targeted/previous. (Invalid cross-device link)
observed when using the SDK Container to build the OS image.
It now also updates the correct store, which it previously did not.
Temporarily accept ssh-rsa algorithm in sshd_config for openssh >= 8.8,
until most ssh clients could deprecate ssh-rsa.
It is the same fix as https://github.com/flatcar-linux/init/pull/54.
However, we should do that again for GCE, because the google-oslogin
ebuild overwrites the existing sshd_config.
It used to be pulled in by dev-lang/python, but not any more. It is
needed for running fsscript during stage4 of SDK build to set up the
default python interpreter.
If python-single-r1.eclass is inherited, then PYTHON_USEDEP can't be
used directly inside dependency variable - either PYTHON_SINGLE_USEDEP
(for single-python-impl packages) should be used or the dependency
should be wrapped into python_gen_cond_dep function (for
multi-python-impl packages). crcmod is a multi-python-impl package, so
use the latter.
Also follow the practice of specifying the BDEPEND in terms of
RDEPEND. For this, we need to bump the EAPI to 7.
The reason for keeping it was that the package assumed that
unversioned python will point to python3 which wasn't the case in
Flatcar. Now that we updated python and made python3 the default, we
can move this package back to portage-stable and update it there.
We are updating python, so this modification is not needed any
more. This also seems to be the only modification we have made in this
ebuild, so we will move it back to portage-stable shortly.
