mirror of
https://github.com/armbian/build.git
synced 2025-09-03 21:01:24 +02:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
20 lines
651 B
Diff
20 lines
651 B
Diff
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
|
|
index 68aadc9..355cf9b 100644
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
|
|
@@ -467,6 +467,14 @@
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
+ nmi_intc: interrupt-controller@01f00c0c {
|
|
+ compatible = "allwinner,sun6i-a31-sc-nmi";
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ reg = <0x01f00c0c 0x38>;
|
|
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ };
|
|
+
|
|
r_ccu: clock@1f01400 {
|
|
compatible = "allwinner,sun50i-a64-r-ccu";
|
|
reg = <0x01f01400 0x100>;
|