armbian_build/patch/kernel/rockchip-rk3588-edge/0026-Add-missing-nodes-to-Orange-Pi-5.patch
Ricardo Pardini 069c49b5f2 rockchip-rk3588-edge: rewrite kernel patches against v6.8-rc1, no changes
- in preparation for bump to v6.8-rc6/7 later
2024-03-03 16:58:34 +01:00

324 lines
6.6 KiB
Diff

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Muhammed Efe Cetin <efectn@protonmail.com>
Date: Thu, 16 Nov 2023 18:09:07 +0300
Subject: arm64: dts: Add missing nodes to Orange Pi 5
---
arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts | 215 +++++++++-
1 file changed, 214 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
index 25de4362af38..f5e86d99084d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -6,6 +6,8 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3588s.dtsi"
/ {
@@ -47,6 +49,51 @@ led-1 {
};
};
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,name = "Orange Pi 5 Audio";
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,pin-switches = "Headphones", "Speaker";
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "LINPUT1", "Onboard Microphone",
+ "RINPUT1", "Onboard Microphone",
+ "LINPUT2", "Microphone Jack",
+ "RINPUT2", "Microphone Jack";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+
vbus_typec: vbus-typec-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -102,34 +149,42 @@ &combphy2_psu {
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
+ mem-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
+ mem-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
+ mem-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
+ mem-supply = <&vdd_cpu_big1_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
};
&gmac1 {
@@ -223,6 +278,75 @@ hym8563: rtc@51 {
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
+
+ es8388: audio-codec@10 {
+ compatible = "everest,es8388";
+ reg = <0x10>;
+ clocks = <&cru I2S1_8CH_MCLKOUT>;
+ assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_mclk>;
+ #sound-dai-cells = <0>;
+ };
+
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus_typec>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "source";
+ op-sink-microwatt = <1000000>;
+ sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_hs: endpoint {
+ remote-endpoint = <&usb_host0_xhci_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_ss: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ usbc0_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_sbu>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2s1_8ch {
+ rockchip,i2s-tx-route = <3 2 1 0>;
+ rockchip,i2s-rx-route = <1 3 2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclk
+ &i2s1m0_lrck
+ &i2s1m0_sdi1
+ &i2s1m0_sdo3>;
+ status = "okay";
};
&mdio1 {
@@ -263,6 +387,12 @@ typec5v_pwren: typec5v-pwren {
rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&saradc {
@@ -364,7 +494,7 @@ regulator-state-mem {
};
};
- vdd_cpu_lit_s0: dcdc-reg2 {
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
@@ -625,6 +755,14 @@ &tsadc {
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
@@ -650,10 +788,48 @@ &usb_host0_ehci {
status = "okay";
};
+&usbdp_phy0 {
+ orientation-switch;
+ mode-switch;
+ svid = <0xff01>;
+ sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_typec_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_ss>;
+ };
+
+ usbdp_phy0_typec_sbu: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_sbu>;
+ };
+ };
+};
+
&usb_host0_ohci {
status = "okay";
};
+&usb_host0_xhci {
+ usb-role-switch;
+ dr_mode = "otg";
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_host0_xhci_drd_sw: endpoint {
+ remote-endpoint = <&usbc0_hs>;
+ };
+ };
+};
+
&usb_host1_ehci {
status = "okay";
};
@@ -665,3 +841,40 @@ &usb_host1_ohci {
&usb_host2_xhci {
status = "okay";
};
+
+&hdmi0 {
+ enable-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+
+&hdptxphy_hdmi0 {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&hdmi0_in {
+ hdmi0_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi0>;
+ };
+};
+
+&hdmi0_out {
+ hdmi0_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&vop {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi0_in_vp0>;
+ };
+};
--
Armbian