mirror of
https://github.com/armbian/build.git
synced 2025-08-09 12:46:58 +02:00
bd72c996b7
* sunxi-6.0: initial state: add megous patches to series * sunxi-6.0: Switch to v6.0.1 * wifi: Limit the version 6.0 for Realtek 88x2cs chipsets * Adjust kernel configs * Remove not needed patches * Adjust broken patches Co-authored-by: Igor <igor@armbian.com>
58 lines
2.1 KiB
Diff
58 lines
2.1 KiB
Diff
From ba02c06fa1b19962f3a297821e6efc25c1f277ec Mon Sep 17 00:00:00 2001
|
|
From: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
Date: Wed, 31 Oct 2018 20:05:14 -0700
|
|
Subject: [PATCH 185/486] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
|
|
|
|
Add binding document for bluetooth part of RTL8723BS/RTL8723CS
|
|
|
|
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
---
|
|
.../bindings/net/rtl8723bs-bluetooth.txt | 35 +++++++++++++++++++
|
|
1 file changed, 35 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
|
|
|
|
diff --git a/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
|
|
new file mode 100644
|
|
index 000000000..8357f242a
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
|
|
@@ -0,0 +1,35 @@
|
|
+RTL8723BS/RTL8723CS Bluetooth
|
|
+---------------------
|
|
+
|
|
+RTL8723CS/RTL8723CS is WiFi + BT chip. WiFi part is connected over SDIO, while
|
|
+BT is connected over serial. It speaks H5 protocol with few extra commands
|
|
+to upload firmware and change module speed.
|
|
+
|
|
+Required properties:
|
|
+
|
|
+ - compatible: should be one of the following:
|
|
+ * "realtek,rtl8723bs-bt"
|
|
+ * "realtek,rtl8723cs-bt"
|
|
+Optional properties:
|
|
+
|
|
+ - device-wake-gpios: GPIO specifier, used to wakeup the BT module (active high)
|
|
+ - enable-gpios: GPIO specifier, used to enable the BT module (active high)
|
|
+ - host-wake-gpios: GPIO specifier, used to wakeup the host processor (active high)
|
|
+ - firmware-postfix: firmware postfix to be used for firmware config
|
|
+ - reset-gpios: GPIO specifier, used to reset the BT module (active high)
|
|
+
|
|
+Example:
|
|
+
|
|
+&uart1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
|
+ status = "okay";
|
|
+
|
|
+ bluetooth {
|
|
+ compatible = "realtek,rtl8723bs-bt";
|
|
+ reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
|
|
+ device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
|
|
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
|
|
+ firmware-postfix="pine64";
|
|
+ };
|
|
+};
|
|
--
|
|
2.35.3
|
|
|