mirror of
https://github.com/armbian/build.git
synced 2025-08-11 05:36:57 +02:00
73691a9e24
* meson64-edge/5.19: use `tag:v5.19-rc2`, meson64 kernel config and kernel patches, by @adeepv * meson64-edge/5.19: we don't need `CONFIG_ARCH_ROCKCHIP=y` for meson64, right? * meson64-edge/5.19: remove `meson_drv_shutdown` revert patch, instead `CONFIG_DRM_MESON=y` and its dependencies in .config - this allows other meson64's to shutdown properly, while allowing the N2(+) to reboot without kernel-side hangs * meson64-edge/5.19: odroidn2(+): remove SD UHS modes patch for ODROID N2(+) - it works when cold-booted - but changes voltage to enable - when rebooted, voltage persists and uboot can't read the SD anymore - adding the "odroid,reboot" driver+dt that is supposed to fix this, doesn't - so for now remove it * meson64-edge/5.19: odroidn2(+): add dumb gpio fan at 30 celsius - backport from rework in 5.10 * meson64-edge/5.19: odroidhc4: bring back `fan1_input` by adding fan details to DT - yeah, I know; the cooling map is right there too, so empty, poor thing. for later. * meson64-edge/5.19: bump to 5.19-rc3 * meson64-edge/5.19: radxa-zero: add patch to remove UHS mode so `wifi` works - sent by @pyavitz: https://raw.githubusercontent.com/pyavitz/debian-image-builder/feature/patches/amlogic/radxazero/wifi/001-arm64-dts-amlogic-radxa-zero-sdio-card-speed.patch - tested by @lanefu * meson64-edge/5.19: bump to 5.19-rc4 * meson64-edge/5.19: bump to 5.19-rc5 * meson64-edge/5.19: bump to 5.19-rc7 * meson64-edge/5.19: bump to 5.19.y branch, which is 5.19.0 right now * Add kernel config - tested on Odroid N2+ Co-authored-by: Vyacheslav Bocharov <adeep@lexina.in> Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
30 lines
981 B
Diff
30 lines
981 B
Diff
From 9058e8940ae84b1bc97693d9aca7b27f55bb1964 Mon Sep 17 00:00:00 2001
|
|
From: Ricardo Pardini <ricardo@pardini.net>
|
|
Date: Sun, 26 Jun 2022 03:47:06 +0200
|
|
Subject: [PATCH] ODROID-HC4: add DT attributes to enable fan1_input
|
|
|
|
- from vendor kernel modified DT
|
|
- this allows userspace fancontrol/pwmconfig to work
|
|
---
|
|
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 4 ++++
|
|
1 file changed, 4 insertions(+)
|
|
|
|
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
|
|
index 0764f1bb5..2b0752144 100644
|
|
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
|
|
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
|
|
@@ -23,6 +23,10 @@ fan0: pwm-fan {
|
|
cooling-max-state = <3>;
|
|
cooling-levels = <0 120 170 220>;
|
|
pwms = <&pwm_cd 1 40000 0>;
|
|
+ fan-supply = <&vcc_5v>;
|
|
+ interrupt-parent = <&gpio_intc>;
|
|
+ interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
|
|
+ pulses-per-revolutions = <2>;
|
|
};
|
|
|
|
leds {
|
|
--
|
|
2.36.1
|
|
|