mirror of
https://github.com/armbian/build.git
synced 2025-08-14 15:16:58 +02:00
1c9ef0872b
* Updated rockchip64-dev to u-boot v2019.10 and BL31 v1.30 (rk3399 boards) * Updated rk3399 to u-boot v2019.10 and BL31 v1.30 * Revert changes to renegade u-boot patches * Moved renegade u-boot patches into board dir * Added debug info for RockPro64 and switched sdmmc to fifo-mode * Disabled regulators in SPL for RockPro64 * Re-enabled sd vcc regulator in SPL for RockPro64 * Some device tree and config changes for OrangePi RK3399 * Fixed Rock Pi 4A's $BOOTCONFIG * Let some boards use mainline atf instead of the one in rkbin For example, roc-rk3399-pc can just boot the kernel using the mainline atf. * Add roc-rk3399-pc * Fixed reset in mainline ATF * Attached ATF version to v2.2 tag * WIP: sdmmc fifo-mode in SPL only * Renamed source config files * Reverted changes to rockchip64 sources config * Reverted patch moves * Add missing trust.ini patch to rk3399 u-boot * Reinstated tpl/spl patches in rk3399 family * Added $RKBIN_DIR prefix in rk3399 sources * Add demonstration of boards bootloader assignment in rk3399
25 lines
667 B
Diff
25 lines
667 B
Diff
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
|
|
@@ -113,6 +113,10 @@
|
|
|
|
vcc_sys: vcc-sys {
|
|
compatible = "regulator-fixed";
|
|
+ enable-active-high;
|
|
+ gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&vcc_sys_en>;
|
|
regulator-name = "vcc_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
@@ -521,6 +525,10 @@
|
|
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
+ vcc_sys_en: vcc-sys-en {
|
|
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+
|
|
hub_rst: hub-rst {
|
|
rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|