From bbead49aaf4394367858aa5c4e3ef183d6cf380b Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Tue, 30 May 2023 00:02:56 +0200 Subject: [PATCH 405/406] Revert "dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth" This reverts commit f8671f387ca4f61167175932fd8971f1a7f38d44. --- .../bindings/net/rtl8723bs-bluetooth.txt | 35 ------------------- 1 file changed, 35 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt diff --git a/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt deleted file mode 100644 index 8357f242ae4c..000000000000 --- a/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt +++ /dev/null @@ -1,35 +0,0 @@ -RTL8723BS/RTL8723CS Bluetooth ---------------------- - -RTL8723CS/RTL8723CS is WiFi + BT chip. WiFi part is connected over SDIO, while -BT is connected over serial. It speaks H5 protocol with few extra commands -to upload firmware and change module speed. - -Required properties: - - - compatible: should be one of the following: - * "realtek,rtl8723bs-bt" - * "realtek,rtl8723cs-bt" -Optional properties: - - - device-wake-gpios: GPIO specifier, used to wakeup the BT module (active high) - - enable-gpios: GPIO specifier, used to enable the BT module (active high) - - host-wake-gpios: GPIO specifier, used to wakeup the host processor (active high) - - firmware-postfix: firmware postfix to be used for firmware config - - reset-gpios: GPIO specifier, used to reset the BT module (active high) - -Example: - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; - - bluetooth { - compatible = "realtek,rtl8723bs-bt"; - reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */ - device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ - host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ - firmware-postfix="pine64"; - }; -}; -- 2.34.1