* [ Rockchip64 ] Add Tinker Board 2
Using Mainline ATF/U-boot/Kernel
What works:
- USB (NOT TYPE C)
- PCIe
- LED's
- Ethernet
- HDMI
TODO:
- Type-C (fusb302 stuff)
- Type-C DP
- Regulators for big cores and GPU (sitting at default values now, no DVFS)
- Formware/driver for RTL8822CE
U-boot spits out some trash right after handing off control from SPL to U-Boot,
but doesn't impact boot. Needs looked at.
* [ rockchip64 ] remove unrelated changes to 369ab2decdc5a3c49973d8eeb783c95558dcc41a
* [ rockchip64 ] fix merge mess from symlinks step 1
* [ rockchip64 ] fix merge mess from symlinks step 2
* [ rockchip64 ] fix merge mess from symlinks step 3
* [ rockchip64 ] add asus driver for FAN53200 regulator
* Rename tinkerboard.conf to tinkerboard.wip
set as WIP for merge to trunk. Not ready for images just yet.
* revert rename to wip
wrong tinkerboard
* Rename tinkerboard-2.conf to tinkerboard-2.wip
prepare for merge to trunk. Not ready for images
* Tinker Board 2 GPU and Type-C
Support USB3 over type-C connector. display Port is still non-functional, framework in device tree however
Enable GPU
* Tinkerboard 2 DTS tweaks
Added this round:
Type-C DP now works
thermal sensors enabled (oops)
* Tinker Board 2 update config
-Adds wifi support for the RTL8822
* Bugfix - fancy modesetting seems to be broken on Amlogic GLX series. Reverting to fbdev fixes the problem of desktop not showing up.
* Tested on Vim2
- Armbian already had all the FIP-magic needed, just use it.
- Introduce USE_ODROID_UBOOT with a list of branches that use Odroid's 2015 u-boot
- this is mostly in preparation for non-Odroid G12B/meson64 boards (Khadas VIM3...)
- In case $BRANCH is listed in USE_ODROID_UBOOT:
- use BOOTCONFIG_ODROID and BOOTSCRIPT_ODROID from board.conf
- build 2015 u-boot just like before
- Small hack into boot-meson64.cmd to handle u-boot vs kernel: n2_plus vs n2-plus DTB/FDT naming mismatch
- overrides the default $fdtfile based on $variant
- armbianEnv still has final say if $fdtfile is set there (it isn't for n2/n2plus)
- Extra:
- remove unused n2-mainline bootscript (maybe from a previous try?)
- comments about FIP trees being identical across N2/N2Plus and C4/HC4 families so no future time wastage
- only set CPUMIN/CPUMAX/GOVERNOR in meson64_common.inc if not already set by the board.conf
- Add some ${bootargs} debugging to mainline/default boot-meson64.cmd
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* cleanup add vim3l
* Add Khadas edge config
* Add Khadas edge sources definitions. It boots
* Change configuration to maximised model
* Adjust build configs
* witch to case statement for meson x11 config
* push vim1 naming
* Booting VIM2 with khadas prebuild u-boot
Can load from an empty eMMC, can be installed to eMMC via nand-sata-install
* Add Vim1 and move 1 and 2 to supported. VIM1 is not tested yet.
* Enable full featured desktop with 3D for khadas vim 1 and vim2
* Update meson64_common.inc
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Move function run_on_sdcard to more appropriate location
* Focus on bash headers, unify, adjust (c)
* Adjust (c) to range
* Cleanup compile.sh
* Cleaning main
* Build all, main configs
* fine tunning
* Improve readme
* Remove Docker version check from compile.sh since its deprecated
* Remove meta package creation which was needed for upgrade
* Update in-code documentation
* Bugfix
* Making oneliner
* Remove Groovy debug leftovers
* Add readme to distributions
* Update
* More text adjust
* Add virtual
* add more
* Updated kernel/u-boot for MCIMX7SABRE board
Supporing 'current' and 'legacy' branches for MCIMX7SABRE board
current branch:
u-boot: imx_v2020.04_5.4.70_2.3.0
kernel: imx_5.4.70_2.3.0
legacy branch:
u-boot: imx_v2018.03_4.14.98_2.0.0_ga
kernel: imx_4.14.98_2.0.0_ga
* Update kernel config with few additional options like zram, bonding, ... just a few to keep minimum consistency over kernels.
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Make builder dockerfile to be x64 and aarch64 compatible
and building speed optimization
* remove hardcoded amd64
currently docker from edge not work, stable works, then stable instead edge
* libc6-dev-armhf-cross need to build rockchip uboot for helios64 under arm64
* need to add architecture to avoid blame for no docker for i386 arch
* hirsute uses same names for qemu-user-static
* let's only x64 use aptly from dev
* Bump imx6 edge to 5.12.y
* Bump odroid xu4 edge to 5.12.y
* Bump Jetson nano edge to 5.12.y
* WIP: Bump sunxi to 5.12.y
- create a copy of patches and make a new link
- wireless patches needs adjutement to 5.12
- some patches are still failing
* Adjust wireless patches to build on 5.12.y
* Remove template wireless patch
* Move Espressobin edge to 5.12.y
* Bump mvebu to 5.12
- patch 92-mvebu-gpio-remove-hardcoded-timer-assignment.patch was disabled @heisath
- adjusted wireless driver for 8723ds
* Adjust sunxi / sunxi64 edge to compile
* Fix kernel config for Jetson nano edge
* bump meson64 to 5.12.y
* bump rockchip edge to 5.12.y
* Bump rockchip64 to 5.12.y
* Bump rk322x edge to 5.12.y
@paolosabatino
* Cleanup im6, re-add 5.10.y patches since one is missing in 5.12.y
* Update odroidxu4 edge links
* rk322x: moved rk322x-edge to kernel 5.12, fix overlay compilation, retouched included kernel modules
* Cleanup: remove deprecated config
Co-authored-by: Paolo Sabatino <paolo.sabatino@gmail.com>
* VENDOR, rock-pi-n10, RM_LIST for armbian-config/zsh
VENDOR parameter in configuration
zsh is the best of course...
Static MAC for networkd
ROCK Pi N10 (Radxa) - Initial support, knwon bugs:
- Problem with poweroff (kernel panic).
- DeviceTree is not fully verified, I suspect missing and unnecessary
entries.
- No support for NPU
- u-boot without NVME support
- I have doubts if I chose the right preboot loader for RK3399Pro, NPU
and installed DDR memory.
* New RK3399Pro boot preloaders.
* rootfs checksum, DEBOOTSTRAP_LIST fix, output.log fix
Repaired checksum for rootfs
Added use PACKAGE_LIST_RM to purge DEBOOTSTRAP_LIST
Better logging to output.log
Fix for new host distribution detection (ie Debian Bullseye).
ubootdebs as new cleaning option
Adds Xilinx Bootgen tools to build environment (alongside sunxi-tools, etc ..)
Adds new SoC family Zynq (7000 series, not MP/UltraScale)
Adds new board Avnet MicroZed
* fix SPL not booting due to signed/unsigned integer comparison
* gpio7 now uses dm-pre-reloc to correctly compile TPL
* adjusted minor thing is defconfig, more room for stacks
* includes patch for efuse for next v2021.04
* add Jetson Nano
* Update jetson-nano.conf
* Update targets.conf
* Add better description
* Adjust config - try to enable ZRAM
* Packaging patch not needed
* Extlinux was solved in other commit
* Move board to CSC for now
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* add extlinux.conf
* - make sure armbianEnv is not added - we don't need variables for NAME_KERNEL and NAME_INITRD. This is not going to change - also MAIN_CMDLINE could at least be renamed so its clear to belong to EXT configuration. Elsewhere this doesn't apply since we have boot scripts
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
