rk322x has peripheral mode that is not working
really well, add various non-upstream patches
and timing adjustments that makes things a bit
more usable (mass storage and ethernet works,
uac isn't)
* meson-6.7: Copy patches from 6.6
Commit f852beca0a ("Switch meson64, bcm2711, sunxi, imx6, mvebu current to 6.6, edge to 6.7 and leave 6.1 for legecy") bump to linux 6.7 but forget to copy patches.
* meson-6.7: Refresh patches
* Add board BananaPi M4 Zero
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
* HACK: wrong DRAM size: add extra barrier in mctl_mem_matches
People report that this is fixed by adding another "dsb();" at
the beginning of the mctl_mem_matches() function.
https://lore.kernel.org/all/ZWMv816r8YxPwsJO@BOB1/T/#mec26415158efa10e6f78c5c1a651bb834f8599c4
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
* v2 add barrier and udelay to mctl_mem_matches function
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
* meson-s4t7: bump u-boot to khadas-vims-u-boot-2019.01-v1.6-release
* Use khadas default bootargs as much as possible
* Add new hook to allow copying code into kernel
* meson-s4t7: legacy: Switch to 5.15 kernel
* meson-s4t7: add kernel-config for 5.15 kernel
* device tree overlays for 5.15 kernel for vim1s and vim4
* restructure packaging of bsp files for vim1s/vim4
* silence vblank warning on boot
* Remove display workaround as it doesn't work with 5.15 kernel
* Remove 5.4 kernel patches
* add salvas UHS overlay and enable on 2 known devices known to have voltage regulator needed to leverage UHS
* remove increased UHS from pinebook-pro default due to justification in kernel commit history
* remove enabling YOLO UHS overlay from default board config
* rockchip64: Add board "ASUS Tinker-Edge-R"
* rockchip64: Add board "ASUS Tinker-Edge-R": hammer for 6.6 current & 6.7 edge
- cleanup
- squash dtsi and dt into a single thing, rename to dashes
- change dtb reference in board file
- drop the 6.1 patch that has junk in it
---------
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
PWM controllable fan (G12A/B/SM1)
Commit provides two new overlays. One for the BananaPi CM4IO
Baseboard "GPIOH_5" and another for general use "GPIOX_5".
CM4IO HEADER PINS: 5V "4"; GND "6"; PWM "7"
On other units the location of the PWM HEADER PIN may vary,
so users will need to either review the wiki or schematic
of said unit.
Fan used in testing:
https://a.co/d/hasnLtj
Modifications: M2S/M5 RTL8822CS
Modded the overlays to be specific to the unit they were made
to be used on.
Tested-on: BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
- general-rc-drivers-should-produce-alternate-pulse-and-space-timing-events.patch: dropped
- added `-spidev` DT's for a few boards (gives access to SPI Flash in exchange for slower eMMC)
- cleanup 0000.patching_config.yaml for meson64-6.7
* Enable CPU frequency configuration for Orange Pi Zero 3
* Revert "Enable CPU frequency configuration for Orange Pi Zero 3"
This reverts commit 7af1ee1116.
* Enable CPU frequency configuration for Orange Pi Zero 3
---------
Co-authored-by: Gunjan Gupta <viraniac@gmail.com>
