* Fix cpufreq (dynamic frequency scaling) for mvebu-current. Also move disabled patches in extra folder for better usability
* Move unlock-atheros-reg patch to disabled
* Accidentally deleted a patch instead of moving it to disabled. Restore it
* Survived standard stress testing + one night of normal operation (Helios4)
* Wireguard: bump tag to most recent since it breaks building on 5.4.y
* Move rockchip current to 5.4.y
* Move sunxi current to 5.4.y
* Move meson64 to 5.4.y
* Move odroidxu4 to 5.4.y and enable "current" targets
* Enable missing target
this update of the previous patch (#1663) additionally fixes the following overlays:
sun5i-a13: i2c1..2, nand, pwm, spi2, uart0..3
sun4i-a10: can, i2c1..2, pwm, spdif-out, spi0..2
corrections re #1663:
sun7i-a20: fixed typo in pwm overlay in #1663
arch64-makefile now back in line with original patch
this update of the previous patch (#1663) additionally fixes the following overlays:
sun5i-a13: i2c1..2, nand, pwm, spi2, uart0..3
sun4i-a10: can, i2c1..2, pwm, spdif-out, spi0..2
corrections re #1663:
sun7i-a20: fixed typo in pwm overlay in #1663
arch64-makefile now back in line with original patch
some armbian dts overlays currently do not work since pinctrl names have not been
adapted to renaming in 5.0 and 5.2.
this patch modifies the following overlays:
sun50i-h5: cir, spdif-out
sun8i-h3: cir, spdif-out
sun7i-a20: i2c1..4, mmc2, pwm, spdif-out, spi0..2, spi-add-cs1, uart4..7
sun5i-a13: uart0
sun4i-a10: spdif-out
some armbian dts overlays currently do not work since pinctrl names have not been
adapted to renaming in 5.0 and 5.2.
this patch modifies the following overlays:
sun50i-h5: cir, spdif-out
sun8i-h3: cir, spdif-out
sun7i-a20: i2c1..4, mmc2, pwm, spdif-out, spi0..2, spi-add-cs1, uart4..7
sun5i-a13: uart0
sun4i-a10: spdif-out
* Sunvell R69: cpu voltage regulator (re-)added - dram clock reduced.
CPU regulator (re-)added to u-boot and kernel dts - the box will not boot without it.
Dram clock reduced in defconfig to increase stability.
[AR-85]
* Updated rockchip64-dev to u-boot v2019.10 and BL31 v1.30 (rk3399 boards)
* Updated rk3399 to u-boot v2019.10 and BL31 v1.30
* Revert changes to renegade u-boot patches
* Moved renegade u-boot patches into board dir
* Added debug info for RockPro64 and switched sdmmc to fifo-mode
* Disabled regulators in SPL for RockPro64
* Re-enabled sd vcc regulator in SPL for RockPro64
* Some device tree and config changes for OrangePi RK3399
* Fixed Rock Pi 4A's $BOOTCONFIG
* Let some boards use mainline atf instead of the one in rkbin
For example, roc-rk3399-pc can just boot the kernel using the
mainline atf.
* Add roc-rk3399-pc
* Fixed reset in mainline ATF
* Attached ATF version to v2.2 tag
* WIP: sdmmc fifo-mode in SPL only
* Renamed source config files
* Reverted changes to rockchip64 sources config
* Reverted patch moves
* Add missing trust.ini patch to rk3399 u-boot
* Reinstated tpl/spl patches in rk3399 family
* Added $RKBIN_DIR prefix in rk3399 sources
* Add demonstration of boards bootloader assignment in rk3399
AR-1 - Adding support category for distributions
AR-4 - Remove Allwinner legacy
AR-5 - Drop Udoo family and move Udoo board into newly created imx6 family
AR-9 - Rename sunxi-next to sunxi-legacy
AR-10 - Rename sunxi-dev to sunxi-current
AR-11 - Adding Radxa Rockpi S support
AR-13 - Rename rockchip64-default to rockchip64-legacy
AR-14 - Add rockchip64-current as mainline source
AR-15 - Drop Rockchip 4.19.y NEXT, current become 5.3.y
AR-16 - Rename RK3399 default to legacy
AR-17 - Rename Odroid XU4 next and default to legacy 4.14.y, add DEV 5.4.y
AR-18 - Add Odroid N2 current mainline
AR-19 - Move Odroid C1 to meson family
AR-20 - Rename mvebu64-default to mvebu64-legacy
AR-21 - Rename mvebu-default to mvebu-legacy
AR-22 - Rename mvebu-next to mvebu-current
AR-23 - Drop meson64 default and next, current becomes former DEV 5.3.y
AR-24 - Drop cubox family and move Cubox/Hummingboard boards under imx6
AR-26 - Adjust motd
AR-27 - Enabling distribution release status
AR-28 - Added new GCC compilers
AR-29 - Implementing Ubuntu Eoan
AR-30 - Add desktop packages per board or family
AR-31 - Remove (Ubuntu/Debian) distribution name from image filename
AR-32 - Move arch configs from configuration.sh to separate arm64 and armhf config files
AR-33 - Revision numbers for beta builds changed to day_in_the_year
AR-34 - Patches support linked patches
AR-35 - Break meson64 family into gxbb and gxl
AR-36 - Add Nanopineo2 Black
AR-38 - Upgrade option from old branches to new one via armbian-config
AR-41 - Show full timezone info
AR-43 - Merge Odroid N2 to meson64
AR-44 - Enable FORCE_BOOTSCRIPT_UPDATE for all builds
* Fix wifi
patch "board-h2plus-nanopi-duo-add-device.patch": increase post-power-on-delay-ms from 50ms to 200ms in wifi_pwrseq node in nanopi-duo dts [dev-branch].
Change in line with other XRADIO device trees (orange pi zero, sunvell).
See also Pull Request #1605.
* Fix xradio patch (dev-branch)
fix KConfig to 5.x - WLAN_VENDOR-flag set to "y" in line with other drivers - otherwise module not loaded.
* correct device name
change nodes "model" and "compatible" to correct device name (from "NanoPi Duo AIR" to "NanoPi Duo") [dev-branch]
Not functionally necessary, but more correct.
U-Boot already support device tree overlay. However, it requires the
base dtb to be compiled with __symbol__ support.
This commit added patches to compile dtb with required parameter.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* UPSTREAM: media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*
Realigned the source code to the RC_TYPE* / RC_BIT_* refactoring
* Restored the inclusion of the DVB-USB dib0700 driver
Adjust configuration, merge with general purpose armv7 Fedora kernel, remove deprecated patch, move coherent_pool and cma to boot script
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
atomic_pool_size can be controlled by kernel cmdline,
coherent_pool=nn[KMG] [ARM,KNL]
then use this parameter to replace the patch.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Initial commit for serial consoles rfc
* Board configuration cleanup + small tweaks
* Add serial gadget rename to dev kernel as well
* Cleanup, fixing permissions
* Cleanup board configs
due to modpost is used by dkms or out-of-tree kernel modules, eg mali
so add this tool to linux-header's postinst script
for #1552
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Initial commit for FA ZeroPi.
* Tested for building.
* Adjust few bugs.
* Move to WIP since its not tested on hardware yet.
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Added initial support of MCIMX7SABRE board
MCIMX7SABRE is NXP iMX7d-based board with 1Gb RAM
2xGBE, 1xmPCIe
Change-Id: I62685a55de54fa6109bef2a8e2ee760d831ffa0e
* Added initial support of MCIMX7SABRE board
MCIMX7SABRE is NXP iMX7d-based board with 1Gb RAM
2xGBE, 1xmPCIe
Change-Id: I62685a55de54fa6109bef2a8e2ee760d831ffa0e
* Changed BOARDFAMILY from mx7dsabre to imx7d
Change-Id: Id351c9f6a8c907b415b804bfe11b86027278ed86
* Disabled MD driver for imx7d Kernel
MD driver does not work correctly on NXP-modified kernel
Change-Id: I58e8de6ee0b99282c452f594e22f6f7e1ff59ae0
* Introducing build-all-ng
* Implementing REBUILD_IMAGES='board1,board2,...' for rebuilding certain images only
* Add optimisations when building kernels - only cycle trough needed targets. Adding variable for defining whether an image is build, otherwise only BSP is made.
* repository manipulating RFC
* Add bianco deb file that is added by default if repository is clean
* Switch to gpg2 signing method, small bugfix
* Create subdir for debs and debs-beta
* Synaptic bugfix: installing indexing tools https://forum.armbian.com/topic/8021-orange-pi-one-synaptic-package-manager-search-very-slow/?do=findComment&comment=74918
* add all modules by default to Odroid N2, but leave them commented
* Bugfix: not making any builds when selecting kernel_only
* Remove EXTERNAL=yes ... move armbian-config and armbian-firmware into main compilation area, drop others since they are deprecated anyway. This will also enable multi threaded images making
* Move armbian.list to create_sources_list function. Replace NTP by Chrony. Remove armbian-firmware from PACKAGE_LIST and RockPi 4A (#1528)
* Replace NTP by chrony. Remove installion of outdated armbian-firmware from reposity.
* added RockPi 4A
* New format for board config
* Fix Bluetooth dependencies for minimal package - add rfkill to family related installs
* Moving networkd-dispatcher from minimal image
* Cubox-i: update default config
* Improving umount process
* Add purgesource feature
* Add FULL_DESKTOP to install few more applications on top of our desktop - notebooks should * rk3399 default: adjust patches and configuration
* Enable full desktop on most powerfull boards and notebooks
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Added ALSA configuration bits for rk3288 HDMI and SPDIF to allow
pulseaudio show proper sound device/profile/mapping names instead of
just "Built-in Audio" for all of them
* Added ALSA device description in asound.conf to provide correct labels for PulseAudio for RK3288 devices when SPDIF and DW-I2S-HDMI simple audio cards are exposed
Removed unnecessary ALSA configuration files previously added from rockchip.conf
* Fixed cpu operating points tables and raised a bit (+5°C) cooling for non-critical temperatures for xt-q8l-v10 in dev and next kernel flavours
* Fixed again cpu opp table
* Removed whole cpu opp table and retouch only necessary operating points
* Enabled gpiomem driver for xt-q8l-v10 in next kernel flavour
* Added debounce delay and card detect gpio pins for sdmmc card holder for xt-q8l-v10 board
* Added card-detect and debounce delay for sdmmc for xt-q8l-v10 board in next kernel flavour too
* Fixed missing comment in xt-q8l-v10 device tree patch
* Added gpiomem to xt-q8l-v10 board for dev kernel
* Fixed FAN53555/Silergy patches to accomodate changes in u-boot v2019.04
* Changed property property flags for USB regulators in u-boot and kernel: kernel is now informed that bootloader is going to turn the USB power on
* Removed assert-phy-reset-when-waking-up-in-rk3288-platform patch due to inclusion in mainline 5.2 kernel
Reenabled ARM-DTSI-rk3288-add-usbphy-reset patch to include USB PHY reset lines to all rk3288 devices
* Removed ARM-DTSI-rk3288-add-usbphy-reset.patch due to inclusion in mainline kernel 5.2
* Attached cubox-i to stock kernel. Tested. Sadly ZRAM has some issues, so it must ramain disabled
* more imx6 updates for cubox/udoo
* Enable HDMI on Cubox-i
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
