* rework to fix regulator and frequency issues
* rework nanopi-r2s, roc-cc and roc-pc patches to accomodate dmc dtsi changes
* map gpu as cooling device
* fix dmc 600 Mhz opp node min voltage
* imported Rockchip project patches from libreelec
* disable duplicate/unapplicable patches and rework others
* add patches for tinkerboard, miqi and xt-q8l-v10 to enable hevc, hevc_mmu and rga nodes
- starting from Home Assistant OS (HASSOS) setup/patchset, which is stable with pure-mainline
- *huge thanks* to Stefan Agner (@agners) from Home Assistant for his work and help with this
- CONFIG_DRM_MESON=y fixes the order of shutdown callbacks, allowing it to reboot without patches
- this increases the kernel size a bit, due to some dependencies like DRM=y
- remove the shutdown revert patch, allowing other meson64 boards to mainline-reboot
- add fdt/no-map patch fixing the dreaded "SError Interrupt on CPU4" panics that plagued the N2
- move the N2 to mainline u-boot on current (rebased, already done)
- add SPI-enabling DTB variants, which allow writing to SPI NOR flash (and usage instructions in comments)
- add UBOOT_TARGET_MAP and write_uboot_platform_mtd to current, for nand-sata-install to SPI/USB goodness
- remove the UHS-enabling patch, to avoid 1.8v vs 3.3v mess. Make sure to use only A1-rated SD cards as recommended.
- change default cpufreq governor for 24h+ stability
- other patch cleanups:
- move deprecated/non-applying patch to need-check
- remove the HardKernel ODROID-specific reboot driver and DTS patches (odroid-reboot.c) which are now useless.
- remove documentation-only patches (we have enough patches in meson64 without those)
- remove duplicated SAR ADC patches
- remove multiple different and conflicting patches for DTS and emulated-PWM GPIO fan
- now using simple on/off GPIO fan at 30 celsius, unrelated to passive cooling
* remove 0-rever-rk3328.dtsi-.patch
* split rk3328-dtsi-mmc-vdec-usb3-tweaks.patch into different specific patches (sdmmc-ext, mmc-reset, power domains, usb3 resets)
* split rk3328-audio-and-renegade-supplies.patch into specific roc-cc audio and supplies patch and general rk3328 spdif patch
* add "dtsi" infix to rk3328 patches that deal with dtsi files
* add back mali gpu operating points patch
* add workaround against default MAC Address (userland utility bdaddr does not work to set MAC Address as expected)
* enable bits for xt-q8l-v10 board (ap6330/bcm4330 part), switching AP6330 bluetooth to btbcm driver using serdev
facilities to avoid userspace machinery with deprecated hciattach tool, added bits to enable driver support in kernel.
Removed ap6330 bluetooth service from bsp packages, added initramfs-tools hook to include bcm4330b1.hcd firmware in initramfs
