Igor Pecovnik
8edf8c56a8
[sunxi-dev] Adjusted patchset. Tested on H3, H5, A64, A83T, H6, ... focused only on basic features such as dvfs, hdmi, ... Kernel sources are switched to @megous and many patches were taken from @anarsoul branch, mostly regarding Pinebook/A64 which will take some time to get upstream. It's a mess which will be eventually sorted out or merged up.
2018-11-15 14:43:32 +01:00
Martin Ayotte
70bb483a3f
fix realtek-8189fs for 4.19.y
2018-11-14 09:55:45 -05:00
Martin Ayotte
e5712c5baa
add h6-spi-add-cs1/h6-spi-jedec-nor overlays
2018-11-13 18:01:16 -05:00
Martin Ayotte
8403ec9bf7
add h6-spi-spidev h6-w1-gpio overlays
2018-11-13 17:17:03 -05:00
Martin Ayotte
e89b17e284
add UARTs/I2Cs H6 overlays + disable them in Main DT
2018-11-13 16:47:06 -05:00
Igor Pecovnik
ced3bf0a40
[ sunxi-dev ] Moving to 4.19.y Tested: H3, H5 (unstable?!), H6(no hdmi), R40 (no hdmi), A83T, A64, ... some wireless drivers were left. They need to be adjusted for 4.19.y
2018-11-13 11:50:40 +01:00
Martin Ayotte
7c85b3b53e
add H6 I2Cs and UARTs
2018-11-12 17:26:43 -05:00
5kft
79b83d0eac
cleaned up Orange Pi Zero Plus2 LED configuration
2018-10-20 17:35:13 +00:00
Igor Pecovnik
28ac7a3683
Realtek 881xAU patch cleanup and adjustement for 4.19.y
2018-10-10 17:03:21 +02:00
Martin Ayotte
9b24f29529
fix wrong WiFi GPIOs on NanoPiM1+
2018-10-06 11:11:35 -04:00
Igor Pecovnik
fd235d6c34
Patches cleanup for sunxi-dev and a bugfix for WiFi powersave workaround
2018-10-02 17:34:41 +02:00
Igor Pecovnik
9fcb58b8f1
Add Wifi and RTC bits to OpiLite2, changing kernel sources to mainline. HDMI is broken here. Untested ...
2018-09-28 18:19:43 +02:00
Igor Pečovnik
a997cf8d7d
Bugfix
2018-09-28 18:08:43 +02:00
5kft
1a94e2a257
updated SY8106A regulator DTs to properly support mainline kernel driver change 8878302ebbc580d64f390c0acc509e5e8276598c
2018-09-23 15:33:31 +00:00
Igor Pecovnik
735a3679e2
H6 boards - add support for 1800 MHz
2018-09-22 20:53:07 +02:00
Igor Pecovnik
6f82ccd186
Adding R40 SATA driver
2018-09-18 17:43:02 +02:00
Martin Ayotte
03199b3879
add olinuxino-a64.wip and fixes for it
2018-09-09 09:59:26 -04:00
ThomasKaiser
a01e8d3175
Increase thermal trip points for Allwinner H5
2018-09-06 09:25:01 -07:00
Igor Pecovnik
48d34c1a86
Add wireless driver for Pinebook
2018-08-29 09:26:32 +02:00
Igor Pecovnik
4430c1ebcf
Fix Pinebook DT, it boots now fine, but its not done yet
2018-08-28 20:24:28 +02:00
Igor Pecovnik
271a15f520
Add patch for lid suspend resume on Teres, higher clock for H6 boards
2018-08-28 15:33:29 +02:00
Martin Ayotte
2918d6af9c
add missing fix-many-orangepiwin-dts.patch in sunxi-dev
2018-08-26 11:16:55 -04:00
Martin Ayotte
5d369f1993
add missing add-orangepi-zeroplus2.patch
2018-08-26 09:08:48 -04:00
Igor Pecovnik
c51fdc6c4a
Add AUFS4.18, adjust several board configs
2018-08-23 15:13:12 +02:00
Igor Pečovnik
a57ce78b37
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
...
* Bump to 4.18, removing the obvious, fixing build problems, put some on waiting.
* Pin 4.18 to DEV, rollback 4.14 to NEXT, adjust configs, remove one deprecated patch from NEXT and add board-h3-address-some-stability-issues.patch
* Adjust few boards in development to new reality, removing it from NEXT for now
* Adjust few board configs
* Board config adjustement
* Adjust few boards configs
* Port NeoCore2 and Neo21.1 to 4.14.y
* Adjust board config
* Adjust board config
2018-08-21 10:41:10 +02:00
Igor Pečovnik
1c11d6ff58
Fixed headers installation. Thanks to Jean Christian
...
https://forum.armbian.com/topic/2901-orange-pi-pc-stuck-on-compiling-headers
2018-07-25 17:06:37 +00:00
Igor Pečovnik
1a12994e79
Moving sunxi-next to 4.17.y ( #1049 )
...
* [Early WIP] Update sunxi-next to kernel 4.17
* Switch Allwinner 32 and 64bit to U-boot 2018.05
* Adjust patched for 4.17.y / sunxi-next
- adjust both configurations
- removing FAT support from u-boot (breaks if you try to save)
Tested those boards:
Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes
Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes
Lime A64: USB no, HDMI no, wireless buggy, eMMC yes
Orangepi prime H5: OK http://ix.io/1fZJ DVFS no
Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT
* Kernel config update, enabling HDMI on CT+
* Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead
* Update orangepioneplus.wip
* Update orangepioneplus.wip
* Fix H6 build process
* Add regulator bits for Orangepizero+, thanks to @5kft
* add H5 support for optional 1.3v regulator and 1.3GHz operation
This patch adds two optional overlays that can be used to:
1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support
2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks
Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator
is controlled by GPIO PL6.
* updates for the NanoPi NEO Plus2
This change introduces a patch that provides two changes for the NanoPi NEO Plus2:
* Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks
* Correct the configurations of the on-board power and status LEDs
* Adjust nightly building and few boards config cleanup
2018-07-17 15:53:30 +02:00
Martin Ayotte
556b306708
missing enable-fsl-timer-errata.patchin DEV
2018-07-13 16:12:55 -04:00
Igor Pečovnik
76e9ce0d16
Switch Sunxi-DEV U-boot to 2018.05, adjust patches, add support for A83T http://ix.io/1fUK
2018-07-03 21:10:18 +00:00
Martin Ayotte
174953de1e
Add eMMC to OlinuXino A64 DT
2018-07-02 15:17:16 -04:00
Martin Ayotte
8fb0d6da7b
add new board-orangepiwin-fix-many-dts.patch
2018-07-01 21:47:39 -04:00
Igor Pecovnik
9952fdaa2d
Revert "fix axp20x patch according to recent Wens patch"
...
This reverts commit cff1915e119e8fb03297c39b7777e422235ad6ab.
2018-06-29 15:56:49 +02:00
Martin Ayotte
8bc9d032a3
fix pantoniou configfs using pelwell patch for new OF API
2018-06-27 11:24:34 -04:00
Martin Ayotte
cff1915e11
fix axp20x patch according to recent Wens patch
2018-06-26 13:07:59 -04:00
Igor Pečovnik
154b83d39d
Patches cleanup, adjust Udoo to 4.17
2018-06-25 17:13:51 +00:00
Igor Pečovnik
731b567278
Adjust default CMA size to 128M for sunxi-64 and set heartbeat to second LED on K1+
2018-06-24 13:51:50 +00:00
Igor Pečovnik
b888408e7e
Fix permissions on several patches, remove deprecated, adjust NanoPI K1 that works with 4.14.y
2018-06-24 11:40:28 +00:00
Igor Pečovnik
acb3ec59e1
Moving Odroid C2 default to 3.16.y
2018-06-22 10:57:55 +00:00
Igor Pečovnik
454c64a3e2
Adjust NanoPi K1 Plus for 4.17.y ...
2018-06-21 15:10:27 +00:00
Igor Pečovnik
10e2065190
SUNXI/64 Add CSI driver, kernel configuration update, meging patches for NeoAir and enable camera driver, enable teres bootlogo, AW SOC ID
2018-06-21 11:31:26 +00:00
Igor Pečovnik
105adc415d
Add Olimex Teres and Pinebook DEV targets and few minor typos. Pinebook boots, Teres almost ... TBC
2018-06-19 19:37:42 +00:00
Igor Pecovnik
dae3924965
Add LED support for Zero Plus2 also to the DEV branch.
...
https://github.com/armbian/build/pull/1012
2018-06-13 10:25:59 +02:00
Igor Pecovnik
d4f52f86a4
Add preliminary support for Orangepi Lite 2 H6
2018-06-05 21:45:54 +02:00
Igor Pecovnik
7040128e35
Add preliminary support for Orangepi One Plus H6 and small typo for H6 Pine config
...
Bootlog: http://ix.io/1col
2018-06-05 16:49:23 +02:00
Karabek
80eec3f2ea
H3 Nanopi Air: Update
...
small update ...
2018-06-05 09:46:44 +02:00
Karabek
89d5bc6820
H3 Nanopi Air: Update
2018-06-05 09:46:11 +02:00
Karabek
d51cce6ceb
H3 NanoPi Neo Air: updated wifi patch
...
updated patch enabling wifi for 4.17 changing model identifier, wifi powerup sequence, and wifi module control
2018-06-03 15:56:29 +02:00
Karabek
cfc87b876b
H3 Nanopi NeoAir: updated patch enabling wifi
...
updated patch for 4.17
2018-06-03 15:55:08 +02:00
Karabek
cdcb2bf748
Add dvfs-functionality to OrangePi boards
...
renamed board-47-05-enable-dvfs-opi-lite from safe-need-more-inspection/47-05-enable-dvfs-opi-lite
2018-06-03 12:52:39 +02:00
Karabek
6881589e5c
Add dvfs-functionality to OrangePi boards
...
renamed board-47-02-enable-dvfs-opi-one from safe-need-more-inspection/47-02-enable-dvfs-opi-one
2018-06-03 12:52:01 +02:00