* Skip applying fixes for touchscreen: goodix.
This device is not supported by armbian.
Patch fixes cannot be tested on real hardware.
* Bring the patch format to the form git-format-patch
for application by the `git am` command.
* This disables support for the RockPI-S "SDNAND" soldered on EMMC storage
Without it, SDNAND functions
There are no issues on boards that lack the EMMC storage option
In this case, the kernel probes the chip, quietly fails and continues without
creating the corresponding /dev/mmcblk* nodes
* This patch attempts to enable CPU operating points that are not defined.
The result is that the cpufreq-dt driver aborts when attempting to process these incompletely defined nodes.
The CPU ends up running at a constant clock rate, without cpufreq support.
Simply removing the patch restores proper cpufreq operation.
Note, however, that the CPU operating points are still overvolted for the newer RK3308B-S SOC.
See:
https://dl.radxa.com/rockpis/docs/sw/RK3308B-S&RK3308H-S_Software_Compatibility_Introduction_V1.0.0_20211016.pdf
* sunxi-5.18: add megous patches: tag: orange-pi-5.18-20220627-1924
* tools: mk_format_patch: ignore-matching-lines git version
* sunxi-5.18: re-extracted armbian patches after being applied to 5.18.8
* sunxi-5.18: switch to version tag=v5.18.8
* sunxi-5.18: add new megous patches
* switch to v5.18.5: exclude a previously applied patch
* fix: tools/mk_format_patch: numbered=false by default
* sunxi-5.18: rebasing and extraction using the mk_format_patch script
* Refactor patches
* Fix bug: the USB closed to the HDMI doesn't work
* Fix bug: cpufreq doesn't work
* Fix bug: thermal_zone doesn't work
* More frequency governors
* Add bootscript
* Fix bug: add missing dependency
needed for gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf
* sunxi-5.18: rebase megous patces to v5.18.3
* sunxi-5.18: Add upstream patches - tag: orange-pi-5.18-20220609-1318
* Check applicability to version 5.18.3
* sunxi-5.18: switch to version 5.18.3
* Update kernel configs
* Switch sunxi edge to 5.18.y
* Move sunxi to 5.18.y and re-enable AUFS
* Change version - temporally to make a build from here
* Update config
* 88xx was fixed in the mean time.
* Put version back
* Fix sunxi legacy, disable aufs on 5.10.y since its broken
* Upstream changed in the mean time
* Add a patch to enable 8821cu compilation at 5.18
https://github.com/armbian/build/pull/3814
* Re-enable CONFIG_RTL8822BU in edge
* Update CONFIG_RTL8XXXU
* Bump imx6
* Bump uefi kernels to 5.18.y
* Bump mvebu64 and switch odroid xu4 to 5.18
* sunxi-5.18 Initial state for armbian patches
* Adapting patches to the new kernel, sort, add new megous patches
* DEBUG
* Add the latest patches
* fix: compile error
drivers/spi/spi.c:3548:3: note: in expansion of macro ‘dev_info’
dev_info(&spi->dev, "spi_setup / gpio_is_valid(%d) ... doing gpio_request ...\n", spi->cs_gpio);
^~~~~~~~
drivers/spi/spi.c:3549:9: error:
implicit declaration of function ‘gpio_request’;
did you mean ‘gpio_to_desc’? [-Werror=implicit-function-declaration]
ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
^~~~~~~~~~~~
gpio_to_desc
drivers/spi/spi.c:3549:27: error:
‘struct spi_device’ has no member named ‘cs_gpio’;
did you mean ‘cs_gpiod’?
ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
^~~~~~~
cs_gpiod
drivers/spi/spi.c:3554:4: error:
implicit declaration of function ‘gpio_direction_output’;
did you mean ‘gpiod_direction_output’? [-Werror=implicit-function-declaration]
gpio_direction_output(spi->cs_gpio,
^~~~~~~~~~~~~~~~~~~~~
gpiod_direction_output
drivers/spi/spi.c:3554:31: error:
‘struct spi_device’ has no member named ‘cs_gpio’;
did you mean ‘cs_gpiod’?
gpio_direction_output(spi->cs_gpio,
^~~~~~~
cs_gpiod
In file included from ./include/linux/device.h:15,
from drivers/spi/spi.c:8:
drivers/spi/spi.c:3556:79: error:
‘struct spi_device’ has no member named ‘cs_gpio’;
did you mean ‘cs_gpiod’?
* Remove pre-applied patches
* sunxi-5.17: update and switch to version 5.17.11
* remove the patch that appeared in the upstream kernel
upstream commit c06a99a6605f524ff5ef096646e9501fc905366e
* sunxi-5.17: Fix include uapi spi spidev module
* add a compatible string alias "spi-dev" for spidev module
* overlay: Change the string compatible "spidev" to "spi-dev"
* remove unused patches
* drv: spi: spidev: fix header uapi
* Add alias "spi-dev" for module spidev
Add the armbian alias "spi-dev" to load and
initialize the spidev module from the device tree.
* Move patches for orangepi3-lts to series
* Remove unused patches
This resolves a bug that affects r8153b USB network interface causing the RX interface to hang on load.
On some xHCI controllers (e.g. Rockchip RK3399/RK3328/RK1808),
they need to enable the ENT flag in the TRB data structure
to force xHC to prefetch the next TRB of a TD.
The quirk patch is already applied to dwc3 xhci usb on rockchip64.
Enable the quirk on RK3328 through device tree node properties in rk3328.dtsi
* sunxi-5.17: Add series patches rtw88, rtw89 drivers
* Fix sunxi-5.17 for v5.17.4 version
* Print the error message and its contents
* rtl8822bs: used if kernel version less 5.16
Restrict the use of the wifi driver" "rtl8822bs" for
the kernel version less than 5.16
* Add reg_ahci_5v status okay for bananapro board
* Bananapro: add AXP209 regulators
* Fix series.conf, Disable the patch that is not being applied.
* Fix linux-sunxi64-edge.config for v5.17.3
* Fix linux-sunxi-edge.config to v5.17.3
* Switch EDGE to core 5.17 for sunxi
* Remove the old rtl8723cs driver which is incompatible with the new kernel and cannot be used.
* Use AUFS if the kernel version is less than 5.16
* Print the last 20 lines of the log if the kernel compilation failed.
* Set KERNEL_VERSION_LEVEL to 5.17
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add 88 new patches to series. tag: orange-pi-5.17-20220409-0454
* Fix the applicability of patches.megous to the v5.17.3 kernel
* Fix series.conf. Disable the patch that is not being applied
* Add support for sun50i-h6-orangepi-3-lts
* Check the applicability in the series
* Move to a patches.armbian folder
* Bananapro: add AXP209 regulators
* fix-gpio-kconfig remove if EXPERT to allow normal build
* sunxi-5.17: Remove unused patches
* alias defined in patch 0007 is part of armada-372x.dtsi, so unnecessary in 37xx
* u-boot patch to dts shouldn't disable emmc or overwrite sdhci1
* update u-boot
* sunxi-5.15: Add reg_ahci_5v status okay for bananapro board
* Bananapro: add AXP209 regulators
* Fix series.conf, Disable the patch that is not being applied.
* sun7i-a20-bananapro: add reg_ahci_5v for sunxi-5.10
* sun7i-a20-bananapro: Add more regulators
* Rename patches for correct apply
* Disable the patch that is not being applied.
The patch is initially a crude hack. It solves one problem but creates
other problems. I don't know how to resolve the conflict correctly yet,
so I just disabled it.
add CONFIG_GPIO_SYSFS=y to linux-sunxi64-current.config and linux-sunxi64-edge.config
remove if EXPERT from /sys/class/gpio/... (sysfs interface) in /drivers/gpio/Kconfig
* The initial state of a series of patches for sunxi-5.17
tag orange-pi-5.17-20220323-1423
* DEBUG for sunxi-5.17
* Add Armbian patches to 5.17
* Fix duplicate nodes for sun50i-h5-orangepi-pc2
* Fix reg_ahci_5v to status okay for bananapro board
* Remove an unused patch for an unsupported sun50i-h6-tanix-tx6 board
* Fix duplicate nodes for sun50i-h5-orangepi-pc2
* Remove unused patch for pinctrl: sunxi: Fix deadlock.
This fix duplicates the upstream commit
896d1b8a36129c3f1378fbbafd7c394a877635b5 of the linux-5.15.y branch
pinctrl: sunxi: Use unique lockdep classes for IRQs
commit bac129dbc6560dfeb634c03f0c08b78024e71915 upstream.
This driver, like several others, uses a chained IRQ for each GPIO bank,
and forwards .irq_set_wake to the GPIO bank's upstream IRQ. As a result,
a call to irq_set_irq_wake() needs to lock both the upstream and
downstream irq_desc's. Lockdep considers this to be a possible deadlock
when the irq_desc's share lockdep classes, which they do by default:
============================================
WARNING: possible recursive locking detected
5.17.0-rc3-00394-gc849047c2473 #1 Not tainted
...
* Add to series.armbian Fix-duplicate-nodes-for-sun50i-h5-orangepi-pc2.patch
The problem with duplicate nodes in the device tree is that the first
one in the queue will be applied. The subsequent one will be ignored,
not replaced.
Fix spi-nor node initialization error for orangepi-pc2
[ 1.288263] spi-nor spi0.0: supply vdd not found, using dummy regulator
[ 1.306391] spi-nor spi0.0: mx25l1606e (2048 Kbytes)
[ 1.845203] Freeing initrd memory: 10824K
[ 1.855263] sun6i-spi 1c68000.spi: chipselect 0 already in use
[ 1.861159] spi_master spi0: spi_device register error /soc/spi@1c68000/spi-flash@0
[ 1.868842] spi_master spi0: Failed to create SPI device for /soc/spi@1c68000/spi-flash@0
Remove duplicate nodes from applied patches for the board
sun50i-h5-orangepi-pc2. After this fix:
[ 1.290252] sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[ 1.291250] spi-nor spi0.0: supply vdd not found, using dummy regulator
[ 1.310397] spi-nor spi0.0: mx25l1606e (2048 Kbytes)
[ 1.845686] Freeing initrd memory: 10824K
[ 1.854333] 2 fixed-partitions partitions found on MTD device spi0.0
[ 1.854369] Creating 2 MTD partitions on "spi0.0":
[ 1.854381] 0x000000000000-0x000000100000 : "uboot"
[ 1.855679] 0x000000100000-0x000000200000 : "env"
* Remove unused pinctrl-sunxi-Fix-misleading-lockdep-deadlock-warnin.patch
The problem was solved in the upstream kernel.
commit e221ef82d9f5e97bca61f7c25e2b58b04466de87 linux-5.16.y branch.
commit bac129dbc6560dfeb634c03f0c08b78024e71915 upstream.
This driver, like several others, uses a chained IRQ for each GPIO bank,
and forwards .irq_set_wake to the GPIO bank's upstream IRQ. As a result,
a call to irq_set_irq_wake() needs to lock both the upstream and
downstream irq_desc's. Lockdep considers this to be a possible deadlock
when the irq_desc's share lockdep classes, which they do by default:
============================================
WARNING: possible recursive locking detected
5.17.0-rc3-00394-gc849047c2473 #1 Not tainted
...
* Fix spi-nor node initialization error for orangepi-pc2
[ 1.288263] spi-nor spi0.0: supply vdd not found, using dummy regulator
[ 1.306391] spi-nor spi0.0: mx25l1606e (2048 Kbytes)
[ 1.845203] Freeing initrd memory: 10824K
[ 1.855263] sun6i-spi 1c68000.spi: chipselect 0 already in use
[ 1.861159] spi_master spi0: spi_device register error /soc/spi@1c68000/spi-flash@0
[ 1.868842] spi_master spi0: Failed to create SPI device for /soc/spi@1c68000/spi-flash@0
Remove duplicate nodes from applied patches for the board
sun50i-h5-orangepi-pc2. After this fix:
[ 1.290252] sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[ 1.291250] spi-nor spi0.0: supply vdd not found, using dummy regulator
[ 1.310397] spi-nor spi0.0: mx25l1606e (2048 Kbytes)
[ 1.845686] Freeing initrd memory: 10824K
[ 1.854333] 2 fixed-partitions partitions found on MTD device spi0.0
[ 1.854369] Creating 2 MTD partitions on "spi0.0":
[ 1.854381] 0x000000000000-0x000000100000 : "uboot"
[ 1.855679] 0x000000100000-0x000000200000 : "env"
