* revert xcfe to old look
* fix login screen xfce old look
* Re-add monitorVirtual-1
* There is not such icon
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
- via Jeremiah Cornelius on the Armbian Forums
- also clarify comment about 2 dtbs in mainline kernel
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* add DFI driver to provide hardware-based memory controller load
* adapted DRAM Memory Controller driver from rk3328, add necessary headers
* provide device tree overlays to enable DDR3 clock scaling
* adapted rk322x-box to allow DDR speed bin selection to user
* add ipb900 board gpio configuration
* add rtl8723cs driver to linux-current kernel
* use ddrbin v1.10 set to 330 Mhz at boot
* provide overlays for ddr3 at 330, 528, 660 and 800 mhz
* split emmc overlays to enable options by user choice
* modified rk322x-config to support dmc, emmc overlays
* remove optee trust os in favor of rockchip proprietary blob
for dmc functionality
* cleanup add vim3l
* Add Khadas edge config
* Add Khadas edge sources definitions. It boots
* Change configuration to maximised model
* Adjust build configs
* witch to case statement for meson x11 config
* push vim1 naming
* Booting VIM2 with khadas prebuild u-boot
Can load from an empty eMMC, can be installed to eMMC via nand-sata-install
* Add Vim1 and move 1 and 2 to supported. VIM1 is not tested yet.
* Enable full featured desktop with 3D for khadas vim 1 and vim2
* Update meson64_common.inc
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* fixing my bad patch from lastnight.
Removing the bad patch I did last night and fixing it with proper sed commands
* fixing names .
had to fix names in the files
* configuring new settings in slick-greeter
* add Jetson Nano
* Update jetson-nano.conf
* Update targets.conf
* Add better description
* Adjust config - try to enable ZRAM
* Packaging patch not needed
* Extlinux was solved in other commit
* Move board to CSC for now
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Right now, you simply cannot choose between different DE's installed on the system. The session indicator uses very little space, and doesn't clutter the greeter.
I noticed it was missing when trying to integrate a Kodi session. It will be useful in the future also, when we incorporate more DE's than Xfce
Pinebook-Pro Support:
suspend to idle via key and lid close
brightness keys
volume control keys
wifi, bluetooth frimware
touchpad tweaks
keyboard config
armbian-hardware-optimization
bootsplash
Co-authored-by: Britt Dodd <britt@reactornet.net>
- Chanaged default x.org configuration to disable glamor
- Reintroduce patch to use DRM cursor plane as overlay in rk322x-current and -dev
- Updated wifi patches for kernel 5.8.10
- Bumped rk322x to u-boot v2020.07, removed reserved zones from device trees
- Updated OPTEE to v3.10, using ddrbin v1.10
- Bumped rk322x-current to kernel 5.8.y
- Imported new patches from knaerzche's LibreELEC fork for rk322x-dev (kernel 5.8.y)
- Adjusted existing patches to match changes, updated rk322x-dev kernel config file
- Add default modprobe conf file for esp8089 to force the crystal frequency to 40Mhz for rk322x targets
- Removed ssv6051 firmware packages to move to armbian-firmware repository
- Switching ssv6051-wifi.cfg to /lib/firmware for rk322x-legacy
- Removed P2P interface for esp8089 driver for rk322x-legacy
- Optimized ssv6051 performance: kernel module gains -Os flag, disabled p2p interface, enabled HW crypto for CCMP cipher
- Enabled remote control interface, IR GPIO kernel module and HDMI CEC modules
* Initial commit for kernel boot splash
* Add startup files to disable bootlog when system is up / down
* Update logo, remove deprecated one
* Introduce new u-boot variable bootlogo
* Adjust kernel config
* Make logo possible on Odroid XU4
- add legacy and current upstream patches
- delete xu4 environment since its not used
* Cleanup C2,C4, both tested, logo works on mainline,
- adding legacy upstream patches for c4
* Enable bootlogo by default on Odroid N2
* Enable logo on RK3399 desktop images
* Cleanup the rest of the environment files
* Add initrd hook that copy splash file to initrd.
* Missing logo bits for one boot scripts
* Enable boot logo on Pinebook A64
* Enable bootlogo on Teres
* Update config
