Patrick Yavitz
e5b6fbe573
BPI-CM4: BT: changed enable-gpios from GPIOX_17 to GPIOX_19
...
As discussed here: https://github.com/armbian/build/pull/5273
REVERTS: e2171ca737
2023-06-02 19:38:14 +02:00
Patrick Yavitz
e2171ca737
BPI-CM4 IO: Use the sdio-pwrseq to reset GPIOX_19
...
This will reset bluetooth `host-wake-gpios`, enabling it to come back upon reboots.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2023-06-01 11:30:10 +02:00
Patrick Yavitz
eafd8bd49a
DRIVER POWER MESON64 RESET: maintenance
...
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2023-06-01 06:32:23 +02:00
Patrick Yavitz
bb48f6080c
Improve Meson64 Support
...
BPI-CM4:
In accordance with the BSP DTS, set LED gpio to GPIO_ACTIVE_LOW.
Added default-on trigger to led-green
Board now powers off, added reboot node 'meson64-reboot'.
CONFIG_POWER_RESET_MESON64
Isolated RESET ODROID driver and renamed to MESON64 as it can be used in more than ODROIDS.
MESON UART
Series improves support for UART attached Bluetooth modules on Amlogic Meson G12A and newer SoCs. These SoCs also support the "divide XTAL by 2" bit which (greatly) reduces jitter when generating baud rates such as 1500000 (which is used by the Bluetooth part of the RTL8822CS SDIO WiFi and UART Bluetooth combo chip).
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2023-06-01 06:32:23 +02:00
Patrick Yavitz
80e4d37315
patch: kernel: meson64-6.1: add-board-bananapi-cm4-cm4io
...
Backport: BPI-CM4 CM4IO dts/dtsi
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2023-05-21 11:11:25 +02:00
SteeManMI
7b99735c44
Fix patch failures on meson64-current (6.1) ( #4973 )
...
Changes to be committed:
deleted: patch/kernel/archive/meson64-6.1/board-bananapim5-002-switch-VDDIO_C-pin-to-OP.patch
- Patch upstreamed in 6.1.16:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts?h=v6.1.20&id=58dccc65221c6465a35cb6bb2ff41f2b75b367f0
modified: patch/kernel/archive/meson64-6.1/board-bananapim5-003-convert-dts-to-dtsi.patcha
- Fixed patch due to upstream change in 6.1.16:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts?h=v6.1.20&id=e35feeb3fdbe3eeffae5e75123fa44523b5076b8
deleted: patch/kernel/archive/meson64-6.1/board-radxa-zero-dts-otg-fix.patch
- Patch upstreamed in 6.1.16:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts?h=v6.1.20&id=b556778f76f975ccf7f008729b5bc2531c58ea95
deleted: patch/kernel/archive/meson64-6.1/general-arm64-dts-amlogic-Make-mmc-host-controller-interrupt.patch
- Patch upstreamed in 6.1.12:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.20&id=274d9a28527d64a95107a1e62c71632065f0924f
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.20&id=222b1070b0fa12be25f9503a503724a899c6326b
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.20&id=a01ad536becb5d4c001a7d50dc1ca9fa14ef75a8
modified: patch/kernel/archive/meson64-6.1/general-meson-mmc-1-arm64-amlogic-mmc-meson-gx-Add-core-tx-rx-eMMC-SD-SD.patch
- Fixed patch due to upstream change in 6.1.13 by copying the 6.2 version which was already rebased
2023-03-20 07:59:11 -04:00
Ash Hughes
2b896d72fb
meson64: current + edge: bring back fixed version of odroid-reboot driver (Fix reboot on odroid C4 when using UHS-II SD cards) [cherry pick]
2023-02-18 07:46:38 -03:00
Igor Pečovnik
31ee14377c
Split Bananapi M2PRO from M5 ( #4826 )
...
This is comming to 6.2 / 6.3
2023-02-12 21:51:59 +01:00
Viacheslav Bocharov
61ee32eed5
Add SDIO irq patch to fix irq lost in new SDIO irq code (kernel 6.0+)
2023-01-26 18:16:30 +03:00
Ricardo Pardini
952fc55acb
meson64: 6.1.y/edge: BananaPi M5: use 270 clock phase via amlogic,mmc-phase ( #4674 )
2023-01-09 13:36:20 +01:00
Ricardo Pardini
2a9b374634
meson64: 6.1.y/edge: docs: fix zero2's patch after bpim2s's addition ( #4672 )
2023-01-09 08:22:45 +01:00
Ricardo Pardini
321fec6f41
meson64: 6.1.y/edge: rebase patches against v6.1.4 (no actual changes) ( #4673 )
2023-01-09 08:22:23 +01:00
jeanrhum
2c58242006
Initial support for Bananapi M2S ( #4597 )
...
* Initial support for Bananapi M2S
BPI-M2S is a small form factor SBC based on the Amlogic A311D chipset (or s922x, not supported yet):
- Amlogic A311D (Quad A73 + Dual A53) CPU
- 4GB LPDDR4 RAM
- 16GB eMMC
- Mali G52-MP4 GPU
- HDMI 2.1 output
- 2 Gigabit ports
- 40 pins GPIO
- 1x USB-A 2.0
- 1 USB-C (5V power)
Not working/tested:
- 2nd ethernet port
- MIPI DSI/CSI
* Edge kernel for BPI M2S
* filename fixes; call attention to sharing FIP blobs
* Adding u-boot patches for BPI M2S
* meson-g12.conf update after amlogic FIP blobs for Bananapi M2S are now part of librelec FIP repo
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
2023-01-01 14:28:49 +01:00
Ricardo Pardini
eb7d4a0bd2
meson64: bump edge to 6.1-rc8 (#4554 )
...
* `meson64-6.1` - rebased patches; 3 were mainlined
- JetHub device was mainlined
- ODROID's hack for pwm1_enable was re-done diffrently in mainline
* `meson64`: switch `current` to `6.0`, `edge` to `6.1-rc8`
2022-12-12 08:02:49 +01:00
