- I guess this is most of the u-boot's I've touched over the years; notable exception is the orangepi3b (patches live in Kwiboo's tree)
- this is in preparation for bumping versions, hopefully soon
- radxa-zero, radxa-zero2, khadas-vim3, khadas-vim3l: drop patches for old u-boot versions no longer used
In my initial commit I assumed CONFIG_USE_PREBOOT=y was enabled
by default. I was wrong.
As reported by MicroLinux (Salva) on DISCORD the unit was still
having issues booting. I sent him a patch I use which enables
preboot and he reported back that "It boots fine now".
NOTES: The patch he tested also had boot logo support enabled. In
my testing boot logo support is not required. If for some reason
in the future there are still eMMC boot issues, than maybe adding
a slight delay "sleep 2" to preboot would suffice.
https://github.com/armbian/build/pull/5858
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
This does not change the current boot order and requires specific
hardware.
Test-on: BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
Update Das U-Boot to v2023.07.02
Patch: HACK: mmc: meson-gx: limit to 24MHz
db6738fed9
In my testing the patch is required for stable boot on REV 1.51.
It is not required on REV 1.4, but has no ill effects on boot.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
HACK: BOOT ORDER: NVMe SDCARD eMMC.
NOTES:
In my testing there has been no false starts or hangs up. Meaning
the boot process has been stable.
The downside to this in my opinion is that if there is an OS on
the NVMe it will always take boot priority. The drive would need
to be pulled or DD'd in order for SD eMMC boot to kick in.
Tested-on: Waveshare CM4-IO-BASE-B
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
Backport DTS/DTSI changes from linux-6.4.y to 6.1.y
Add meson64-reboot driver to all boards
Add board: ODROID N2L
Add uart_A uart_AO_B uart_B uart_C where appropriate
U-Boot v2023.07.02: ODROID N2/N2L/N2Plus/C4
Meson64-reboot driver: (source: tobetter)
While the current meson64-reboot driver is cleaner and doesn't
depend on modding other kernel sources, its functionality leaves
much to be desired. One example can be found in the ODROID C4.
Using the current driver, the board will not properly power off,
leaving the POWER LED still on. The new driver powers off the unit
completely.
Fan control: (ODROID N2L/N2PLus)
Added service and script for controlling the trip point.
fanctrl: arguments: 65 55 45 35 25 menu run
┌──┤ Fan Control ├──┐
│ │
│ 6) 65°C │
│ 5) 55°C │
│ 4) 45°C │
│ 3) 35°C │
│ 2) 25°C │
│ E) Exit .. │
│ │
│ │
│ <Ok> │
│ │
└───────────────────┘
NOTES: (N2L/HC4): I do not own the units so I can't run tests.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Removed WIP status
Added CONFIG_R8169=m to defconfig(s) (eth support)
Modified and added additional patches (linux 6.1 / 6.4)
U-Boot v2023.07.2 (dropped v2022.10)
Upstream BT FW (rtl8822cs) is now shared between CM4IO and M2s
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
