- `risc-v`: rework RichNeese's boards, reduce families, move tweaks to boards
- `risc-v`/`starfive`: `CONFIG_MOTORCOMM_PHY=m` for the onboard Ethernet
- `risc-v`/`starfive`: use mainline kernel 6.1.y, with StarFive's rebased patches against `v6.1.5`
- from https://github.com/starfive-tech/linux/commits/visionfive
- contention point: `1022-soc-sifive-ccache-Add-StarFive-JH71x0-support.patch` which I merged half-assed, need review/fixes?
- `risc-v`/`starfive`: update kernel config, sans changes
- `risc-v`/`starfive`: switch from `grub` to `extlinux`
- `risc-v`/`starfive`: new `starfive` family with their (vendor) kernel
Co-authored-by: Richard Neese <r.neese@gmail.com>
- symptoms:
- no video display in u-boot
- can't boot from SD (but does from eMMC)
- this has proven to solve nothing, but is still neat
- real problem is probably the FIP?
- have absolutely no idea if this works. there's also some other `armv5` variants to try if this does not.
- XU4's CPU is Exynos5422 ARM Cortex-A15 which should be armv7-a indeed, so why not?
- i.MX 6 series is ARM Cortex-A9 or Cortex-A7, which should be armv7-a indeed, so why not?
- ARMADA A388 is 32-bit Cortex A9, which should be armv7-a indeed, so why not?
- sharing most UEFI code, will replace the `virtual` one soon
- x86: patch uboot defconfig to use the `q35` machine type, not `i440fx`
- separate x86 bootscript, due to non-uInitrd-ness of it
- hack ramdisk load address both in u-boot source and bootscript
- use 32-bit u-boot, not 64-bit
- grub: introduce `UEFI_GRUB=skip`, does not deploy GRUB (but does the kernel packages, etc)
- auto-enable qcow2 output for these
- works with both distro's and Armbian's kernels
Adds i2c3, pwm1, pwdm2, spi0 and uart1 nodes to rk3568-odroid-m1.dts.
Adds patch to remove spi-dev warning
Adds patch with support for overlay compilation
Adds DTS overlays for spi, uart0, uart1, pwm1, pwm2, pwm9, i2c0 and i2c1
Co-authored-by: jassuncao <joao.assuncao@exploitsys.com>
RK3328 UART1 and I2C0 are available on Orange Pi R1 Plus LTS 13 pin connector. Add device tree overlay files for rk3328 uart1 and i2c0.
Co-authored-by: schwar3kat <schwar3kat@armbian.com>
* Add some Wireless modules to RK3588 legacy kernel
* Add some Wireless modules to RK3588 legacy kernel
* Add some Wireless modules to RK3588 legacy kernel
