There are many changes in this file and its impossible to cover this with a patch for now current and all kernels back
We are using same hack in UWE drivers.
I have changed the way the patches are generated a bit. Instead of using orange-pi branch from megous tree for 6.6 kernel, I have used the following kernel branches
a83t-suspend, af8133j, anx, audio,
axp, cam, drm, err, fixes, mbus,
modem, opi3, pb, pinetab, pp, ppkb,
samuel, speed, tbs-a711, ths
These branches were carefully chosen to include only allwinner related patches and remove importing of the rockchip related patches into the allwinner kernel.
Following patches are modified to fix patch application failure
- patches.armbian/arm64-dts-sun50i-h616-orangepi-zero2-reg_usb1_vbus-status-ok.patch
- patches.armbian/arm64-dts-sun50i-h616-orangepi-zero2-Enable-GPU-mali.patch
- patches.armbian/arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2.patch
- patches.armbian/arm64-dts-allwinner-h616-LED-green_power_on-red_status_heartbeat.patch
- patches.armbian/arm64-dts-allwinner-overlay-Add-Overlays-for-sunxi64.patch
- patches.armbian/arm64-dts-sun50i-h616-bigtreetech-cb1.patch
Following patches are modified because of kernel api change to fix compilation failure
- patches.armbian/drv-gpu-drm-sun4i-Add-HDMI-audio-sun4i-hdmi-encoder.patch
- patches.armbian/drv-of-Device-Tree-Overlay-ConfigFS-interface.patch
Update Das U-Boot to v2023.07.02
Patch: HACK: mmc: meson-gx: limit to 24MHz
db6738fed9
In my testing the patch is required for stable boot on REV 1.51.
It is not required on REV 1.4, but has no ill effects on boot.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
Set fan max speed to kick in at 65*C. This keeps the unit roughly
at 70*C or lower, when pusing all cores for an extended period of
time.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
HACK: BOOT ORDER: NVMe SDCARD eMMC.
NOTES:
In my testing there has been no false starts or hangs up. Meaning
the boot process has been stable.
The downside to this in my opinion is that if there is an OS on
the NVMe it will always take boot priority. The drive would need
to be pulled or DD'd in order for SD eMMC boot to kick in.
Tested-on: Waveshare CM4-IO-BASE-B
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
https://www.waveshare.com/wiki/CM4-IO-BASE-B
Fan, RTC and USB support
RTC requires rtc pcf85063 driver
Fan requires hwmon emc2305 driver
Added wakeup-source to fanctrl node so emc2305 module loads at boot.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
BPI-CM4 fan control
hwmon: emc2305: fixups for driver
The driver had a number of issues, checkpatch warnings/errors,
and other limitations, so fix these up to make it usable.
hwmon: emc2305: Change OF properties pwm-min & pwm-max to u8
hwmon: emc2305: Add calls to initialize cooling maps
233096b8a9/drivers/hwmon/emc2305.c
Tested-on: CM4-IO-BASE-B: https://www.waveshare.com/wiki/CM4-IO-BASE-B
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
https://www.waveshare.com/wiki/CM4-IO-BASE-B
Fan, RTC and USB support
RTC requires rtc pcf85063 driver
Fan requires hwmon emc2305 driver
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
