Update Tools in Scripts / Update ${{ matrix.tool.REPO_NAME }} version (map[PROJECT_NAME:koalaman/shellcheck REPO_NAME:shellcheck USER_NAME:koalaman VAR_FILE:lib/functions/general/shellcheck.sh VERSION_VAR:SHELLCHECK_VERSION]) (push) Has been cancelled
Update Tools in Scripts / Update ${{ matrix.tool.REPO_NAME }} version (map[PROJECT_NAME:koalaman/shellcheck REPO_NAME:shellcheck USER_NAME:koalaman VAR_FILE:lib/tools/shellcheck.sh VERSION_VAR:SHELLCHECK_VERSION]) (push) Has been cancelled
Update Tools in Scripts / Update ${{ matrix.tool.REPO_NAME }} version (map[PROJECT_NAME:mvdan/sh REPO_NAME:sh USER_NAME:mvdan VAR_FILE:lib/tools/shellfmt.sh VERSION_VAR:SHELLFMT_VERSION]) (push) Has been cancelled
Update Tools in Scripts / Update ${{ matrix.tool.REPO_NAME }} version (map[PROJECT_NAME:oras-project/oras REPO_NAME:oras USER_NAME:oras-project VAR_FILE:lib/functions/general/oci-oras.sh VERSION_VAR:ORAS_VERSION]) (push) Has been cancelled
Update Tools in Scripts / Update ${{ matrix.tool.REPO_NAME }} version (map[PROJECT_NAME:sharkdp/bat REPO_NAME:bat USER_NAME:sharkdp VAR_FILE:lib/functions/general/bat-cat.sh VERSION_VAR:BATCAT_VERSION]) (push) Has been cancelled
* Correcting the Perf unit's interrupt source number to 66 as stated in the Allwinner A10User manual to resolve conflict with Uart 2 which actually uses interrupt source number 3
* rename to all lower case and add in sun4i-emac dma support. Note that support only exist in the driver for the rx channel
* Ensure that sun4i patches actually implemented
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Apply performance monitoring unit IRQ number patch to uboot
* Add patch for resolving the perf unit irq number to the edge kernel
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Add sun4i emac ethernet DMA support to the edge kernel
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Append missing .patch so that our patch is found and works properly
Signed-off-by: Ryan L <ryestar101@gmail.com>
* Apply EMAC DMA support and PMU fix to edge kernel
---------
Signed-off-by: Ryan L <ryestar101@gmail.com>
this commit reverts commit ca2dc35e555e7043de585f4e46123d8fbd2b5a21
from mainline kernel because rk3288 requires clock gating to
assert irq on usb device plug in and thus proceed with
reset-on-wake quirk
- original from 6.11, re-done on top of Viacheslav's 6.12 fix which missed it
- otherwise
```
drivers/soc/amlogic/meson-gx-socinfo-sm.c:178:19: error: initialization of 'void (*)(struct platform_device *)' from incompatible pointer type 'int (*)(struct platform_device *)' [-Werror=incompatible-pointer-types]
178 | .remove = meson_gx_socinfo_sm_remove,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
```
Source: https://lore.kernel.org/all/20241016-b4-rk3588-bridge-upstream-v10-0-87ef92a6d14e@collabora.com/^
-----------------------------
**Quote from source:**
Subject: [PATCH v10 0/3] Add initial support for the Rockchip RK3588 HDMI TX Controller
Date: Wed, 16 Oct 2024 23:06:50 +0300
The Rockchip RK3588 SoC family integrates the Synopsys DesignWare HDMI
2.1 Quad-Pixel (QP) TX controller, which is a new IP block, quite
different from those used in the previous generations of Rockchip SoCs.
The controller supports the following features, among others:
* Fixed Rate Link (FRL)
* Display Stream Compression (DSC)
* 4K@120Hz and 8K@60Hz video modes
* Variable Refresh Rate (VRR) including Quick Media Switching (QMS)
* Fast Vactive (FVA)
* SCDC I2C DDC access
* Multi-stream audio
* Enhanced Audio Return Channel (EARC)
This is the last component that needs to be supported in order to enable
the HDMI output functionality on the RK3588 based SBCs, such as the
RADXA Rock 5B. The other components are the Video Output Processor
(VOP2) and the Samsung IP based HDMI/eDP TX Combo PHY, for which basic
support has been already made available via [1] and [2], respectively.
Please note this is a reworked version of the original series, which
relied on a commonized dw-hdmi approach. Since the general consensus
was to handle it as an entirely new IP, I dropped all patches related to
the old dw-hdmi and Rockchip glue code - a few of them might still make
sense as general improvements and will be submitted separately.
It's worth mentioning the HDMI output support is currently limited to
RGB output up to 4K@60Hz, without audio, CEC or any of the HDMI 2.1
specific features. Moreover, the VOP2 driver is not able to properly
handle all display modes supported by the connected screens, e.g. it
doesn't cope with non-integer refresh rates.
A possible workaround consists of enabling the display controller to
make use of the clock provided by the HDMI PHY PLL. This is still work
in progress and will be submitted later, as well as the required DTS
updates.
To facilitate testing and experimentation, all HDMI output related
patches, including those part of this series, are available at [3].
So far I could only verify this on the RADXA Rock 5B board.
Thanks,
Cristian
[1]: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
[2]: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
[3]: https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/commits/rk3588-hdmi-bridge-v6.12-rc2
[4]: https://lore.kernel.org/lkml/20240801-dw-hdmi-qp-tx-v1-0-148f542de5fd@collabora.com/
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
- 0001-general-add-overlay-support
- 0024-RK3588-Add-Crypto-Support (asm/unaligned.h moved to linux/unaligned.h)
- 0025-RK3588-Add-HW-RNG-Support (rename driver file to avoid conflict with new 6.12 driver)
Also add temporary compatibility patch for existing installations,
since existing installations will look for the old dts file.
To make migration smoother, add a pointer to the new file by
including the new dts in the old one.
For migration:
Please edit your `/boot/armbianEnv.txt` as soon as possible to
use BOOT_FDT_FILE="rockchip/rk3588-friendlyelec-cm3588-nas.dtb"!
This workaround will be removed in kernel version 6.14!
- remove patches (already mainlined)
- while at it, rename BOARD_MAINTAINER to the actual GitHub profile
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
* Board: NanoPC T6 & LTS - Bump uboot from 2024.07 to 2024.10 mainline
- Replaced edge patch with v7 that enable power-supply on USB3.0 and add fan control through pwm.
* Revert BOOTCONFIG to the original state that not exist on vendor kernel and aligned edge BOOTCONFIG
* Rewrited patch with rewrite-kernel-patches flag
* Adjusted nanopct6 configuration
Co-authored-by: ColorfulRhino <131405023+ColorfulRhino@users.noreply.github.com>
* Revert patch, added on the same patch a new patch for usb3 and fan stuff
---------
Signed-off-by: SuperKali <hello@superkali.me>
Co-authored-by: ColorfulRhino <131405023+ColorfulRhino@users.noreply.github.com>
Removed gpio-keys node (NOTE: add to the M4 Berry DTS)
Add vcc1v8 and vcc3v3 regulators
Fixup MMC nodes
Add bluetooth node (NOTE: BT is still iffy in Armbian)
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Re-extract the kernel patches as a series.
Re-extract the u-boot patches as "git format-patch" command.
Unified patch extraction makes it easier to work with patches.
Added a DTSI just in case a M4 Berry should be added at a
later date.
Removed usb1_vbus-supply = <®_usb_vbus>; from the &usbphy
node. In my testing this resolves the onboard WiFi over USB
issue that has been troubling the REV1.
Added REV2 related nodes: SDIO, Regulators, Etc ...
An SDIO / Bluetooth overlay will be added at a later date to
support the REV2.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
