* sunxi-5.17: update and switch to version 5.17.11
* remove the patch that appeared in the upstream kernel
upstream commit c06a99a6605f524ff5ef096646e9501fc905366e
* sunxi-5.17: Fix include uapi spi spidev module
* add a compatible string alias "spi-dev" for spidev module
* overlay: Change the string compatible "spidev" to "spi-dev"
* remove unused patches
* drv: spi: spidev: fix header uapi
* Add alias "spi-dev" for module spidev
Add the armbian alias "spi-dev" to load and
initialize the spidev module from the device tree.
* Move patches for orangepi3-lts to series
* Remove unused patches
This resolves a bug that affects r8153b USB network interface causing the RX interface to hang on load.
On some xHCI controllers (e.g. Rockchip RK3399/RK3328/RK1808),
they need to enable the ENT flag in the TRB data structure
to force xHC to prefetch the next TRB of a TD.
The quirk patch is already applied to dwc3 xhci usb on rockchip64.
Enable the quirk on RK3328 through device tree node properties in rk3328.dtsi
* sunxi-5.17: Add series patches rtw88, rtw89 drivers
* Fix sunxi-5.17 for v5.17.4 version
* Print the error message and its contents
* rtl8822bs: used if kernel version less 5.16
Restrict the use of the wifi driver" "rtl8822bs" for
the kernel version less than 5.16
* Add reg_ahci_5v status okay for bananapro board
* Bananapro: add AXP209 regulators
* Fix series.conf, Disable the patch that is not being applied.
* Fix linux-sunxi64-edge.config for v5.17.3
* Fix linux-sunxi-edge.config to v5.17.3
* Switch EDGE to core 5.17 for sunxi
* Remove the old rtl8723cs driver which is incompatible with the new kernel and cannot be used.
* Use AUFS if the kernel version is less than 5.16
* Print the last 20 lines of the log if the kernel compilation failed.
* Set KERNEL_VERSION_LEVEL to 5.17
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add 88 new patches to series. tag: orange-pi-5.17-20220409-0454
* Fix the applicability of patches.megous to the v5.17.3 kernel
* Fix series.conf. Disable the patch that is not being applied
* Add support for sun50i-h6-orangepi-3-lts
* Check the applicability in the series
* Move to a patches.armbian folder
* Bananapro: add AXP209 regulators
* fix-gpio-kconfig remove if EXPERT to allow normal build
* sunxi-5.17: Remove unused patches
* alias defined in patch 0007 is part of armada-372x.dtsi, so unnecessary in 37xx
* u-boot patch to dts shouldn't disable emmc or overwrite sdhci1
* update u-boot
* sunxi-5.15: Add reg_ahci_5v status okay for bananapro board
* Bananapro: add AXP209 regulators
* Fix series.conf, Disable the patch that is not being applied.
* sun7i-a20-bananapro: add reg_ahci_5v for sunxi-5.10
* sun7i-a20-bananapro: Add more regulators
* Rename patches for correct apply
* Disable the patch that is not being applied.
The patch is initially a crude hack. It solves one problem but creates
other problems. I don't know how to resolve the conflict correctly yet,
so I just disabled it.
add CONFIG_GPIO_SYSFS=y to linux-sunxi64-current.config and linux-sunxi64-edge.config
remove if EXPERT from /sys/class/gpio/... (sysfs interface) in /drivers/gpio/Kconfig
