All warning:
debug> grep warning: compilation.log | wc -l
152
A large number of garbage warnings:
debug> grep warning: compilation.log | grep IEEE80211_MAX_AMPDU_BUF | wc -l
103
After v4.19 linux kernel, this definition is not required.
Check:
list="$(find drivers/net/wireless/realtek/ -type f)"
for f in $list;do awk -v f=$f '/IEEE80211_MAX_AMPDU_BUF/{print f}' $f;done
drivers/net/wireless/realtek/rtlwifi/base.c
drivers/net/wireless/realtek/rtl8723cs/include/wifi.h
Only one drivers/net/wireless/realtek/rtlwifi/base.c file uses
the definition IEEE80211_MAX_AMPDU_BUF_HT.
or
See `git log -p b8042b3da925f390c1482b -3` command in
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Rework patches for sunxi 5.15.4
* Rework patches sunxi for 5.15.5
* Kernel switch tag=v5.15.5 for sunxi EDGE
* Temporarily disabled, requires rework.
drivers/clk/sunxi-ng/sun8i-de33.c: In function ‘sunxi_de33_clk_probe’:
drivers/clk/sunxi-ng/sun8i-de33.c:155:8:
error: implicit declaration of function ‘sunxi_ccu_probe’;
did you mean ‘of_sunxi_ccu_probe’? [-Werror=implicit-function-declarati>
ret = sunxi_ccu_probe(pdev->dev.of_node, reg, ccu_desc);
^~~~~~~~~~~~~~~
of_sunxi_ccu_probe
cc1: some warnings being treated as errors
make[3]: *** [scripts/Makefile.build:277:
drivers/clk/sunxi-ng/sun8i-de33.o] Error 1
make[2]: *** [scripts/Makefile.build:540: drivers/clk/sunxi-ng] Error 2
* Correct the comment.
* Add a series of patches for sunxi 5.10
Patches from the repository
https://github.com/megous/linux branches of orange-pi-5.10
* Patches adapted to the kernel version v5.10.81
* Remove unnecessary patches 5.10.19-5.10.75
* Kernel switch tag=v5.10.81 for the current sunxi
* Adjust broken patches, build tested on sunxi and sunxi64
* Remove patch added by mistake
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add new function apply_patch_series
* Apply a series of patches if a series.conf file exists
* Add all megous orange-pi-5.15 branch patches as series
* Add an Exception for version 5.15 for sanxi
* Adjust the switch for sunxi
* Fix megous patches series for v5.15.3
* Switch version to 5.15.3 for sunxi
* Check the exception for 5.15 sunxi
* rework to fix regulator and frequency issues
* rework nanopi-r2s, roc-cc and roc-pc patches to accomodate dmc dtsi changes
* map gpu as cooling device
* fix dmc 600 Mhz opp node min voltage
* imported Rockchip project patches from libreelec
* disable duplicate/unapplicable patches and rework others
* add patches for tinkerboard, miqi and xt-q8l-v10 to enable hevc, hevc_mmu and rga nodes
- starting from Home Assistant OS (HASSOS) setup/patchset, which is stable with pure-mainline
- *huge thanks* to Stefan Agner (@agners) from Home Assistant for his work and help with this
- CONFIG_DRM_MESON=y fixes the order of shutdown callbacks, allowing it to reboot without patches
- this increases the kernel size a bit, due to some dependencies like DRM=y
- remove the shutdown revert patch, allowing other meson64 boards to mainline-reboot
- add fdt/no-map patch fixing the dreaded "SError Interrupt on CPU4" panics that plagued the N2
- move the N2 to mainline u-boot on current (rebased, already done)
- add SPI-enabling DTB variants, which allow writing to SPI NOR flash (and usage instructions in comments)
- add UBOOT_TARGET_MAP and write_uboot_platform_mtd to current, for nand-sata-install to SPI/USB goodness
- remove the UHS-enabling patch, to avoid 1.8v vs 3.3v mess. Make sure to use only A1-rated SD cards as recommended.
- change default cpufreq governor for 24h+ stability
- other patch cleanups:
- move deprecated/non-applying patch to need-check
- remove the HardKernel ODROID-specific reboot driver and DTS patches (odroid-reboot.c) which are now useless.
- remove documentation-only patches (we have enough patches in meson64 without those)
- remove duplicated SAR ADC patches
- remove multiple different and conflicting patches for DTS and emulated-PWM GPIO fan
- now using simple on/off GPIO fan at 30 celsius, unrelated to passive cooling
* remove 0-rever-rk3328.dtsi-.patch
* split rk3328-dtsi-mmc-vdec-usb3-tweaks.patch into different specific patches (sdmmc-ext, mmc-reset, power domains, usb3 resets)
* split rk3328-audio-and-renegade-supplies.patch into specific roc-cc audio and supplies patch and general rk3328 spdif patch
* add "dtsi" infix to rk3328 patches that deal with dtsi files
* add back mali gpu operating points patch
* add workaround against default MAC Address (userland utility bdaddr does not work to set MAC Address as expected)
* enable bits for xt-q8l-v10 board (ap6330/bcm4330 part), switching AP6330 bluetooth to btbcm driver using serdev
facilities to avoid userspace machinery with deprecated hciattach tool, added bits to enable driver support in kernel.
Removed ap6330 bluetooth service from bsp packages, added initramfs-tools hook to include bcm4330b1.hcd firmware in initramfs
* Backporting patch to 5.10 kernel makes sense. Lets do it.
Co-authored-by: iamdrq <iamdrq@qq.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bumping EDGE kernel to 5.14.y
Meson64:
- removing Odroid reboot shutdown patch since its probably not needed anymore
Rockchip64:
- removing Rockpi S. No interest to maintain this any further
- removing PBP suspend. Doesn’t align. Need inspection if some other way was mainstreamed
- temporally removing Orangepi R1
* Re-adding rockpis, pbp suspend, HFLPS170 wifi and cleanup
* Removing deprecated patch, fixing ap6256 wifi
* Re-enable Opi R1 plus, untest
* Add and fix Radxa Zero
* Add support for Radxa Zero
u-boot: new patch based on v2021.04
kernel: use patches sent to kernel list by chewitt
Tested with minimal build and cinnamon desktop:
- SD/eMMC, ok
- USB3, works in USB 2 mode
- HDMI, ok
- WiFi/BT, ok
Signed-off-by: Jack Ma <jack@radxa.com>
* Add build targets
* Cleanup and set min speed to 666000
* Change to WIP target
Support status undetermined
Co-authored-by: Jack Ma <jack@radxa.com>
- fix/dup bootscript, since new u-boot fixed n2_plus to n2-plus variant
- g12b: if n2 and edge, enable new u-boot; include non-SD version as SPI binary; write_uboot_platform_mtd
- Kernel DTS patch to add SPI-flash-enabled DTBs (slower eMMC), produces -spi .dtbs for n2 and n2-plus
- This could also be an overlay, but I dunno overlays.
- SPI+USB3 boot works with "pendrive" storage, untested with cabled/high power USB->SATA or USB->NVMe
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* [ meson64 ] nanopi K2 ethernet fix
Fix NanoPi K2 Ethernet issues
Do some cleanup of the Meson64 folder while at it
* [ Meson64 ] revert accidental delete of C2 audio patch
