* Add Rockpi 4C+
* add newer patches:
- apply patches from RadxaNaoki <noaki@radxa.com>
- ref 5652d6f9c2a4e2c50ac1040c0388859381b0616f: arm64: dts: rockchip: add gmac for ROCK 4C+ (#17)
- apply latest patches from Marcone <marco.nelissen@gmail.com>
- ref e39da181b099a86f5440ed1c08fc699d4a65aed7: arm64: dts: rockchip: Make Rock Pi 4C+ ethernet actually work
- ref 8c519612eeb852268371b3c596eec4622460e5bf: arm64: dts: rockchip: add Rock Pi 4C+ LEDs
- ref 726441afe687ea6059bac37f145ff204b75430f7: arm64: dts: rockchip: enable Rock Pi 4C+ wifi
- ref caad7bef3b5558e2598480c0a0089e2ac3cedcdd: arm64: dts: rockchip: enable Rock Pi 4C+ nvme
- ref 6cdc3215d1691bcd2a407a30e88efa0cec179eb2: arm64: dts: rockchip: enable Rock Pi 4C+ OTG
* default top USB3 port to host mode
* get 2nd HDMI port to work at least. :)
* revert OTG USB3.1 port back to otg mode
* [rockpi4c+] update board def. add usb host overlay.
* remove redundant HDMI clocks and voltages
* enable test builds for Rock PI 4 C+
* [rockpi4c+] add USB host overlay
Co-authored-by: Joe Khoobyar <fourheads@gmail.com>
* Rockchip64 Linux-5.10y - drivers for Motorcomm YT8531
renamed the previous "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" to "net-phy-Add-driver-for-Motorcomm-1-YT85xx-PHYs.patch" to fix patch order and added a new patch "net-phy-Add-driver-for-Motorcomm-2-YT8531-PHYs.patch"
The new YT8531 patch is sourced from from Lean's OpenWrt source rockchip/patches-5.10/601-net-phy-Add-driver-for-Motorcomm-YT8531-PHYs.patch.
It is intended to extend a patch identical to Armbian's "net-phy-Add-driver-for-Motorcomm-YT85xx-PHYs.patch" and is used without alteration.
* Add new board OrangePi R1 LTS (rk3328)
Includes uBoot and support for Linux-5.10y
* Rockchip64 Linux-5.15y drivers for YT8531 and other Motorcomm chips
YT8010, YT8510, YT8511, YT8512, YT8521. The driver patch set is sourced from Xunlong-OrangePi OpenWRT and is used as is, with only a name and makefile change.
A single patch set uses the same underlying source code as the Armbian Linux-5.10y set, but uses inbuilt logic to apply tweaks that depend on the Linux kernel version.
The patch is renamed similarly to the 5.10 patch set, net-phy-Add-driver-for-Motorcomm-T85xx+PHYs.patch to imply code base continuity with the previous similar Armbian patch sets.
* Rockchip64 Linux-5.15y support for Orange Pi R1 Plus LTS
Includes DTS and makefile changes. A driver for net phy YT8531C is in a separate commit
* change orangepi-r1plus-lts.csc to orangepi-r1plus-lts.conf
board is now supported
* - add patch also to 5.16.y
- fix wrong patch permission
* Fix Makefile patch
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
* remove incorrectly duplicated GPIO pins from I2C7, name I2C7/I2C8 bus, from README.rockchip-overlays
Co-authored-by: Leif Sawyer <leif@akhepcat.com>
* Backporting patch to 5.10 kernel makes sense. Lets do it.
Co-authored-by: iamdrq <iamdrq@qq.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* [ RK3328 ] boost GPU voltages to avoid starving Memory controller
The RK3328 has the dynamic memory controller and GPU on the same power rail.
Both are able to be dynamically clocked, both have opp tables.
- DMC min voltage: 1.075V
- GPU min voltage: 0.950V
On boards with only the GPU enabled, they memory controller can be under-voltaged.
On boards attempting to use both, the disagreeing opps result in the GPU failing to init
This patch applies a mV range opp to the GPU and fixed opps to the DMC on rk3328-roc-cc
to allow everything to get alongin all possible devfreq situations.
* [ rockchip64 ] clean up disabled patches
* [ rock64 ] add mali supply and remove unused 5V supply
- New Mali opps will keep from starving ram controller
- extra supply was causing dmesg errors.
As it shares enable with another supply and both were marked "always on"
I removed the second. Neither are referenced by any ports/devices.
* add DFI driver to provide hardware-based memory controller load
* adapted DRAM Memory Controller driver from rk3328, add necessary headers
* provide device tree overlays to enable DDR3 clock scaling
* adapted rk322x-box to allow DDR speed bin selection to user
* add ipb900 board gpio configuration
* add rtl8723cs driver to linux-current kernel
* use ddrbin v1.10 set to 330 Mhz at boot
* provide overlays for ddr3 at 330, 528, 660 and 800 mhz
* split emmc overlays to enable options by user choice
* modified rk322x-config to support dmc, emmc overlays
* remove optee trust os in favor of rockchip proprietary blob
for dmc functionality
* [ Rockchip64 ] Add Tinker Board 2
Using Mainline ATF/U-boot/Kernel
What works:
- USB (NOT TYPE C)
- PCIe
- LED's
- Ethernet
- HDMI
TODO:
- Type-C (fusb302 stuff)
- Type-C DP
- Regulators for big cores and GPU (sitting at default values now, no DVFS)
- Formware/driver for RTL8822CE
U-boot spits out some trash right after handing off control from SPL to U-Boot,
but doesn't impact boot. Needs looked at.
* [ rockchip64 ] remove unrelated changes to 369ab2decdc5a3c49973d8eeb783c95558dcc41a
* [ rockchip64 ] fix merge mess from symlinks step 1
* [ rockchip64 ] fix merge mess from symlinks step 2
* [ rockchip64 ] fix merge mess from symlinks step 3
* [ rockchip64 ] add asus driver for FAN53200 regulator
* Rename tinkerboard.conf to tinkerboard.wip
set as WIP for merge to trunk. Not ready for images just yet.
* revert rename to wip
wrong tinkerboard
* Rename tinkerboard-2.conf to tinkerboard-2.wip
prepare for merge to trunk. Not ready for images
* Tinker Board 2 GPU and Type-C
Support USB3 over type-C connector. display Port is still non-functional, framework in device tree however
Enable GPU
* Tinkerboard 2 DTS tweaks
Added this round:
Type-C DP now works
thermal sensors enabled (oops)
* Tinker Board 2 update config
-Adds wifi support for the RTL8822
