Igor Pečovnik
31ee14377c
Split Bananapi M2PRO from M5 ( #4826 )
...
This is comming to 6.2 / 6.3
2023-02-12 21:51:59 +01:00
Viacheslav Bocharov
61ee32eed5
Add SDIO irq patch to fix irq lost in new SDIO irq code (kernel 6.0+)
2023-01-26 18:16:30 +03:00
Ricardo Pardini
952fc55acb
meson64: 6.1.y/edge: BananaPi M5: use 270 clock phase via amlogic,mmc-phase ( #4674 )
2023-01-09 13:36:20 +01:00
Ricardo Pardini
2a9b374634
meson64: 6.1.y/edge: docs: fix zero2's patch after bpim2s's addition ( #4672 )
2023-01-09 08:22:45 +01:00
Ricardo Pardini
321fec6f41
meson64: 6.1.y/edge: rebase patches against v6.1.4 (no actual changes) ( #4673 )
2023-01-09 08:22:23 +01:00
jeanrhum
2c58242006
Initial support for Bananapi M2S ( #4597 )
...
* Initial support for Bananapi M2S
BPI-M2S is a small form factor SBC based on the Amlogic A311D chipset (or s922x, not supported yet):
- Amlogic A311D (Quad A73 + Dual A53) CPU
- 4GB LPDDR4 RAM
- 16GB eMMC
- Mali G52-MP4 GPU
- HDMI 2.1 output
- 2 Gigabit ports
- 40 pins GPIO
- 1x USB-A 2.0
- 1 USB-C (5V power)
Not working/tested:
- 2nd ethernet port
- MIPI DSI/CSI
* Edge kernel for BPI M2S
* filename fixes; call attention to sharing FIP blobs
* Adding u-boot patches for BPI M2S
* meson-g12.conf update after amlogic FIP blobs for Bananapi M2S are now part of librelec FIP repo
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
2023-01-01 14:28:49 +01:00
Ricardo Pardini
eb7d4a0bd2
meson64: bump edge to 6.1-rc8 (#4554 )
...
* `meson64-6.1` - rebased patches; 3 were mainlined
- JetHub device was mainlined
- ODROID's hack for pwm1_enable was re-done diffrently in mainline
* `meson64`: switch `current` to `6.0`, `edge` to `6.1-rc8`
2022-12-12 08:02:49 +01:00
