- desktop images have half the world in their initrd (plymouth?)
- `bdinfo` shows reserved regions, which are hit depending on the size of initrd
- when reserved region is hit, u-boot says `** Reading file would overwrite reserved memory **`
- done by AI after looking at `bdinfo` reserved regions
- hard lesson: all `0x` hex have to be double quoted, otherwise `Wrong image format for "source" command`
- add note about Meco having conjured up `load_addr` (it's `loadaddr`); doesn't hurt
- while at it, remove copypasta/duplicate bootlogo/consoleargs stanza
- Enable bootscript templating using `envsubst`.
- Add generic bootscript.
- Fix: `test` does not support `==`, but deceptively returns `true` in case you use it.
- De-duplicate kernel commandline console options.
- Change debug console from ttyS2 to ttyS0
- Remove SERIALCON from board configs
- Set console based on BOOT_SOC
- Enable UART0 in device tree for nanopi-r76s
* Khadas VIM4: U-Boot: Mod bootargs/defconfig and add bootscr support
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Pull U-Boot from CoreELEC instead of Khadas
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Remove setexpr bootargs sub rootfstype= from boot.cmd
This is no longer required
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson S4T7: family.conf: Add missing `mkdir -p "${tbasedir}"`
The toolchains fail to download because the dir isn't created
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson T7: Add rootfstype= to command line
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Add extra boot arguments
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Remove `viraniac` as maintainer and add `rw` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Add `fsck.repair=yes` and `rootwait` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Move `${bootargs}` placement
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Co-authored-by: Igor <igor@armbian.com>
XpressReal(https://xpressreal.io/) is a family of Single Board Computers
developed in collaboration between Fyde Innovations, Radxa and Realtek.
XpressReal T3 is the first product in the family - a small form factor
high performance single board computer powered by the Realtek RTD1619B,
which runs FydeOS/openFyde and Linux!
Now we are adding the awesome Armbian Linux support for XpressReal T3!
This commit introduces some binary files that XpressReal T3 needed:
- firmware/realtek/rtd1619b
These binaries are the firmware for rtd1619b peripherals
(including the audio decoder, video decoder, etc.).
- u-boot-fw.tar.gz
This contains some co-processor firmware,
which needs to be loaded by u-boot in the early stage of boot.
- u-boot-prebuilt.tar.gz
These are hwsettings related files, used for tasks such as DDR initialization.
These files come from the rtd1619b SDK, which has already been open-sourced on our github:
- [firmware](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-kernel/linux-firmware/files/rtd1619b)
- [u-boot prebuilts](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-bsp/u-boot/files/prebuilt/rtd1619b)
Follow conventional `if-then-else-fi` constructions by not having `else` followed by semicolon. Hush is accepting, but other commonly used shells do not accept this.
- Added FDT resize/trim to allow big DT and overlays and still use
configured load addresses in case `setexpr` not available
- Moved FDT resize and next load address alignment
- Added filename information to load instructions
- Moved all "global" variable determinations to the top of the
bootscript
https://github.com/armbian/build/issues/8178
- Add switch to turn avoidance on/off
- Increment base address before alignment to resolve the oboe
- oboe observed in U-Boot v2021.04 and in particular with DT loading
- Updated names to reflect function better.
- Followed coding style of rest of the file, e.g. `test` instead of `itest` and `if ... ; then`.
- If `setexpr` fails, use configured addresses - either the ones defined in boot.cmd or set by armbianEnv.txt.
Now that upstream U-Boot has support for building K3 boot artifacts
we can drop using the ti-u-boot fork. Switch to v2025.01 and
adjust file names and add new dependencies as needed.
After that, the script successfully loads the DTB file from
two possible paths and overlays. If the file does not exist,
then the default file will be uploaded.
Use the DTB name from the u-boot default for the third
iteration if the provided DTB name was not found. Also
delete the duplicate of the previous iteration.
In the second iteration, we check the path that does not
contain the vendor folder. But this will also be done if
the real path contains the vendor's folder and the vendor's
name is contained in the DTB file name as
fdtfile=allwinner/sun50i-*-bananapi-*.dtb.
However, overlays will not be available.
Remove "allwinner/" from all board configurations that
use the boot script mechanism so that the script works
correctly.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
Inform the user about the actual file that will be uploaded
on the first iteration. Inform the user that it cannot be
downloaded only once if the first iteration was unsuccessful.
Set the expected default path to /boot/dtb/allwinner and
start analyzing if the DTB file is not found in this path.
The folder with the vendor's name is now part of the path,
not part of the file name. This greatly facilitates the analysis
of various possible options in a simple u-boot shell.
Device tree files and overlay files are interconnected
and always located in the same place, separated by
the overlay subdirectory.
${fdtdir}/${fdtfile}
${fdtdir}/overlay/${overlay_prefix}-${overlay_file}.dtbo
By default, we are trying to download a dtb file from
the /boot/dtb folder, which is a link to the real folder.
Depending on the time and type of build, this link may
point directly to the target folder or to a subdirectory,
i.e. possible path options:
/boot/dtb/overlay
/boot/dtb/allwinner/overlay
In the file armbianEnv.txt we can also see:
fdtfile=sun8i-*.dtb
or
fdtfile=allwinner/sun8i-*.dtb
Thus, when the user has frozen the kernel and updated
the BSP package, or vice versa, updated only the kernel,
the following options are possible in the paths after
their concatenation in the script:
/boot/dtb/sun8i-*.dtb
/boot/dtb/allwinner/sun8i-*.dtb
/boot/dtb/allwinner/allwinner/sun8i-*.dtb
Define and remember default path variables.
Provide the user with the ability to specify the path
to the target folder as:
fdtdir=/path/to/dir
Check the existence of the dtb file in all reasonable
paths and set the path to it.
If not found, download the default file from the default path.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
The "swapaccount=" option has been deprecated in 6.1. Disable it in almost all boot scripts except "boot-sun50iw9.cmd" since that one is used in sun50iw9 legacy kernel, which is version 4.9.
Link to kernel commit:
b25806dcd3
create new boot script free of G12 stuff, using default u-boot load addresses.
La Frite boots from USB as well as eMMC, add ability to get root device via PARTUUID
