arm-trusted-firmware/plat/nvidia/tegra/drivers/memctrl/memctrl_v2.c
Varun Wadekar 08e60f803f Tegra: memctrl: platform setup handler functions
The driver initially contained the setup steps to help Tegra186
and Tegra194 SoCs. In order to support future SoCs and make sure
that the driver remains generic enough, some code should be moved
to SoC.

This patch creates a setup handler for a platform to implement its
initialization sequence.

Change-Id: I8bab7fd07f25e0457ead8e2d2713efe54782a59b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
2020-08-27 20:13:43 -07:00

355 lines
9.9 KiB
C

/*
* Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2019-2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <string.h>
#include <arch_helpers.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <lib/mmio.h>
#include <lib/utils.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <mce.h>
#include <memctrl.h>
#include <memctrl_v2.h>
#include <smmu.h>
#include <tegra_def.h>
#include <tegra_platform.h>
#include <tegra_private.h>
/* Video Memory base and size (live values) */
static uint64_t video_mem_base;
static uint64_t video_mem_size_mb;
/*
* Init Memory controller during boot.
*/
void tegra_memctrl_setup(void)
{
INFO("Tegra Memory Controller (v2)\n");
/* Initialize the System memory management unit */
tegra_smmu_init();
/* allow platforms to program custom memory controller settings */
plat_memctrl_setup();
/*
* All requests at boot time, and certain requests during
* normal run time, are physically addressed and must bypass
* the SMMU. The client hub logic implements a hardware bypass
* path around the Translation Buffer Units (TBU). During
* boot-time, the SMMU_BYPASS_CTRL register (which defaults to
* TBU_BYPASS mode) will be used to steer all requests around
* the uninitialized TBUs. During normal operation, this register
* is locked into TBU_BYPASS_SID config, which routes requests
* with special StreamID 0x7f on the bypass path and all others
* through the selected TBU. This is done to disable SMMU Bypass
* mode, as it could be used to circumvent SMMU security checks.
*/
tegra_mc_write_32(MC_SMMU_BYPASS_CONFIG,
MC_SMMU_BYPASS_CONFIG_SETTINGS);
}
/*
* Restore Memory Controller settings after "System Suspend"
*/
void tegra_memctrl_restore_settings(void)
{
/* restore platform's memory controller settings */
plat_memctrl_restore();
/* video memory carveout region */
if (video_mem_base != 0ULL) {
tegra_mc_write_32(MC_VIDEO_PROTECT_BASE_LO,
(uint32_t)video_mem_base);
assert(tegra_mc_read_32(MC_VIDEO_PROTECT_BASE_LO)
== (uint32_t)video_mem_base);
tegra_mc_write_32(MC_VIDEO_PROTECT_BASE_HI,
(uint32_t)(video_mem_base >> 32));
assert(tegra_mc_read_32(MC_VIDEO_PROTECT_BASE_HI)
== (uint32_t)(video_mem_base >> 32));
tegra_mc_write_32(MC_VIDEO_PROTECT_SIZE_MB,
(uint32_t)video_mem_size_mb);
assert(tegra_mc_read_32(MC_VIDEO_PROTECT_SIZE_MB)
== (uint32_t)video_mem_size_mb);
/*
* MCE propagates the VideoMem configuration values across the
* CCPLEX.
*/
mce_update_gsc_videomem();
}
}
/*
* Secure the BL31 DRAM aperture.
*
* phys_base = physical base of TZDRAM aperture
* size_in_bytes = size of aperture in bytes
*/
void tegra_memctrl_tzdram_setup(uint64_t phys_base, uint32_t size_in_bytes)
{
/*
* Perform platform specific steps.
*/
plat_memctrl_tzdram_setup(phys_base, size_in_bytes);
}
/*
* Secure the BL31 TZRAM aperture.
*
* phys_base = physical base of TZRAM aperture
* size_in_bytes = size of aperture in bytes
*/
void tegra_memctrl_tzram_setup(uint64_t phys_base, uint32_t size_in_bytes)
{
; /* do nothing */
}
/*
* Save MC settings before "System Suspend" to TZDRAM
*/
void tegra_mc_save_context(uint64_t mc_ctx_addr)
{
uint32_t i, num_entries = 0;
mc_regs_t *mc_ctx_regs;
const plat_params_from_bl2_t *params_from_bl2 = bl31_get_plat_params();
uint64_t tzdram_base = params_from_bl2->tzdram_base;
uint64_t tzdram_end = tzdram_base + params_from_bl2->tzdram_size;
assert((mc_ctx_addr >= tzdram_base) && (mc_ctx_addr <= tzdram_end));
/* get MC context table */
mc_ctx_regs = plat_memctrl_get_sys_suspend_ctx();
assert(mc_ctx_regs != NULL);
/*
* mc_ctx_regs[0].val contains the size of the context table minus
* the last entry. Sanity check the table size before we start with
* the context save operation.
*/
while (mc_ctx_regs[num_entries].reg != 0xFFFFFFFFU) {
num_entries++;
}
/* panic if the sizes do not match */
if (num_entries != mc_ctx_regs[0].val) {
ERROR("MC context size mismatch!");
panic();
}
/* save MC register values */
for (i = 1U; i < num_entries; i++) {
mc_ctx_regs[i].val = mmio_read_32(mc_ctx_regs[i].reg);
}
/* increment by 1 to take care of the last entry */
num_entries++;
/* Save MC config settings */
(void)memcpy((void *)mc_ctx_addr, mc_ctx_regs,
sizeof(mc_regs_t) * num_entries);
/* save the MC table address */
mmio_write_32(TEGRA_SCRATCH_BASE + SCRATCH_MC_TABLE_ADDR_LO,
(uint32_t)mc_ctx_addr);
assert(mmio_read_32(TEGRA_SCRATCH_BASE + SCRATCH_MC_TABLE_ADDR_LO)
== (uint32_t)mc_ctx_addr);
mmio_write_32(TEGRA_SCRATCH_BASE + SCRATCH_MC_TABLE_ADDR_HI,
(uint32_t)(mc_ctx_addr >> 32));
assert(mmio_read_32(TEGRA_SCRATCH_BASE + SCRATCH_MC_TABLE_ADDR_HI)
== (uint32_t)(mc_ctx_addr >> 32));
}
static void tegra_lock_videomem_nonoverlap(uint64_t phys_base,
uint64_t size_in_bytes)
{
uint32_t index;
uint64_t total_128kb_blocks = size_in_bytes >> 17;
uint64_t residual_4kb_blocks = (size_in_bytes & (uint32_t)0x1FFFF) >> 12;
uint64_t val;
/*
* Reset the access configuration registers to restrict access to
* old Videomem aperture
*/
for (index = MC_VIDEO_PROTECT_CLEAR_ACCESS_CFG0;
index < ((uint32_t)MC_VIDEO_PROTECT_CLEAR_ACCESS_CFG0 + (uint32_t)MC_GSC_CONFIG_REGS_SIZE);
index += 4U) {
tegra_mc_write_32(index, 0);
}
/*
* Set the base. It must be 4k aligned, at least.
*/
assert((phys_base & (uint64_t)0xFFF) == 0U);
tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_BASE_LO, (uint32_t)phys_base);
tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_BASE_HI,
(uint32_t)(phys_base >> 32) & (uint32_t)MC_GSC_BASE_HI_MASK);
/*
* Set the aperture size
*
* total size = (number of 128KB blocks) + (number of remaining 4KB
* blocks)
*
*/
val = (uint32_t)((residual_4kb_blocks << MC_GSC_SIZE_RANGE_4KB_SHIFT) |
total_128kb_blocks);
tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_SIZE, (uint32_t)val);
/*
* Lock the configuration settings by enabling TZ-only lock and
* locking the configuration against any future changes from NS
* world.
*/
tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_CFG,
(uint32_t)MC_GSC_ENABLE_TZ_LOCK_BIT);
/*
* MCE propagates the GSC configuration values across the
* CCPLEX.
*/
}
static void tegra_unlock_videomem_nonoverlap(void)
{
/* Clear the base */
tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_BASE_LO, 0);
tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_BASE_HI, 0);
/* Clear the size */
tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_SIZE, 0);
}
static void tegra_clear_videomem(uintptr_t non_overlap_area_start,
unsigned long long non_overlap_area_size)
{
int ret;
INFO("Cleaning previous Video Memory Carveout\n");
/*
* Map the NS memory first, clean it and then unmap it.
*/
ret = mmap_add_dynamic_region(non_overlap_area_start, /* PA */
non_overlap_area_start, /* VA */
non_overlap_area_size, /* size */
MT_DEVICE | MT_RW | MT_NS); /* attrs */
assert(ret == 0);
zeromem((void *)non_overlap_area_start, non_overlap_area_size);
flush_dcache_range(non_overlap_area_start, non_overlap_area_size);
ret = mmap_remove_dynamic_region(non_overlap_area_start,
non_overlap_area_size);
assert(ret == 0);
}
static void tegra_clear_videomem_nonoverlap(uintptr_t phys_base,
unsigned long size_in_bytes)
{
uintptr_t vmem_end_old = video_mem_base + (video_mem_size_mb << 20);
uintptr_t vmem_end_new = phys_base + size_in_bytes;
unsigned long long non_overlap_area_size;
/*
* Clear the old regions now being exposed. The following cases
* can occur -
*
* 1. clear whole old region (no overlap with new region)
* 2. clear old sub-region below new base
* 3. clear old sub-region above new end
*/
if ((phys_base > vmem_end_old) || (video_mem_base > vmem_end_new)) {
tegra_clear_videomem(video_mem_base,
video_mem_size_mb << 20U);
} else {
if (video_mem_base < phys_base) {
non_overlap_area_size = phys_base - video_mem_base;
tegra_clear_videomem(video_mem_base, non_overlap_area_size);
}
if (vmem_end_old > vmem_end_new) {
non_overlap_area_size = vmem_end_old - vmem_end_new;
tegra_clear_videomem(vmem_end_new, non_overlap_area_size);
}
}
}
/*
* Program the Video Memory carveout region
*
* phys_base = physical base of aperture
* size_in_bytes = size of aperture in bytes
*/
void tegra_memctrl_videomem_setup(uint64_t phys_base, uint32_t size_in_bytes)
{
/*
* Setup the Memory controller to restrict CPU accesses to the Video
* Memory region
*/
INFO("Configuring Video Memory Carveout\n");
if (video_mem_base != 0U) {
/*
* Lock the non overlapping memory being cleared so that
* other masters do not accidently write to it. The memory
* would be unlocked once the non overlapping region is
* cleared and the new memory settings take effect.
*/
tegra_lock_videomem_nonoverlap(video_mem_base,
video_mem_size_mb << 20);
}
/* program the Videomem aperture */
tegra_mc_write_32(MC_VIDEO_PROTECT_BASE_LO, (uint32_t)phys_base);
tegra_mc_write_32(MC_VIDEO_PROTECT_BASE_HI,
(uint32_t)(phys_base >> 32));
tegra_mc_write_32(MC_VIDEO_PROTECT_SIZE_MB, size_in_bytes >> 20);
/* Redundancy check for Video Protect setting */
assert(tegra_mc_read_32(MC_VIDEO_PROTECT_BASE_LO)
== (uint32_t)phys_base);
assert(tegra_mc_read_32(MC_VIDEO_PROTECT_BASE_HI)
== (uint32_t)(phys_base >> 32));
assert(tegra_mc_read_32(MC_VIDEO_PROTECT_SIZE_MB)
== (size_in_bytes >> 20));
/*
* MCE propagates the VideoMem configuration values across the
* CCPLEX.
*/
(void)mce_update_gsc_videomem();
/* Clear the non-overlapping memory */
if (video_mem_base != 0U) {
tegra_clear_videomem_nonoverlap(phys_base, size_in_bytes);
tegra_unlock_videomem_nonoverlap();
}
/* store new values */
video_mem_base = phys_base;
video_mem_size_mb = (uint64_t)size_in_bytes >> 20;
}
/*
* This feature exists only for v1 of the Tegra Memory Controller.
*/
void tegra_memctrl_disable_ahb_redirection(void)
{
; /* do nothing */
}
void tegra_memctrl_clear_pending_interrupts(void)
{
; /* do nothing */
}