arm-trusted-firmware/plat/arm/css/common/css_scp_bootloader.c
Sandrine Bailleux 556b966fa2 Detect SCP version incompatibility
There has been a breaking change in the communication protocols used
between the AP cores and the SCP on CSS based platforms like Juno.
This means both the AP Trusted Firmware and SCP firmware must be
updated at the same time.

In case the user forgets to update the SCP ROM firmware, this patch
detects when it still uses the previous version of the communication
protocol. It will then output a comprehensive error message that helps
trouble-shoot the issue.

Change-Id: I7baf8f05ec0b7d8df25e0ee53df61fe7be0207c2
2015-04-28 19:50:57 +01:00

201 lines
5.8 KiB
C

/*
* Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch_helpers.h>
#include <assert.h>
#include <css_def.h>
#include <debug.h>
#include <platform.h>
#include <stdint.h>
#include "css_mhu.h"
#include "css_scp_bootloader.h"
#include "css_scpi.h"
/* ID of the MHU slot used for the BOM protocol */
#define BOM_MHU_SLOT_ID 0
/* Boot commands sent from AP -> SCP */
#define BOOT_CMD_INFO 0x00
#define BOOT_CMD_DATA 0x01
/* BOM command header */
typedef struct {
uint32_t id : 8;
uint32_t reserved : 24;
} bom_cmd_t;
typedef struct {
uint32_t image_size;
uint32_t checksum;
} cmd_info_payload_t;
/*
* Unlike the SCPI protocol, the boot protocol uses the same memory region
* for both AP -> SCP and SCP -> AP transfers; define the address of this...
*/
#define BOM_SHARED_MEM (MHU_SECURE_BASE + 0x0080)
#define BOM_CMD_HEADER ((bom_cmd_t *) BOM_SHARED_MEM)
#define BOM_CMD_PAYLOAD ((void *) (BOM_SHARED_MEM + sizeof(bom_cmd_t)))
typedef struct {
/* Offset from the base address of the Trusted RAM */
uint32_t offset;
uint32_t block_size;
} cmd_data_payload_t;
static void scp_boot_message_start(void)
{
mhu_secure_message_start(BOM_MHU_SLOT_ID);
}
static void scp_boot_message_send(size_t payload_size)
{
/* Make sure payload can be seen by SCP */
if (MHU_PAYLOAD_CACHED)
flush_dcache_range(BOM_SHARED_MEM,
sizeof(bom_cmd_t) + payload_size);
/* Send command to SCP */
mhu_secure_message_send(BOM_MHU_SLOT_ID);
}
static uint32_t scp_boot_message_wait(size_t size)
{
uint32_t mhu_status;
mhu_status = mhu_secure_message_wait();
/* Expect an SCP Boot Protocol message, reject any other protocol */
if (mhu_status != (1 << BOM_MHU_SLOT_ID)) {
ERROR("MHU: Unexpected protocol (MHU status: 0x%x)\n",
mhu_status);
panic();
}
/* Make sure we see the reply from the SCP and not any stale data */
if (MHU_PAYLOAD_CACHED)
inv_dcache_range(BOM_SHARED_MEM, size);
return *(uint32_t *) BOM_SHARED_MEM;
}
static void scp_boot_message_end(void)
{
mhu_secure_message_end(BOM_MHU_SLOT_ID);
}
int scp_bootloader_transfer(void *image, unsigned int image_size)
{
uint32_t response;
uint32_t checksum;
cmd_info_payload_t *cmd_info_payload;
cmd_data_payload_t *cmd_data_payload;
assert((uintptr_t) image == BL30_BASE);
if ((image_size == 0) || (image_size % 4 != 0)) {
ERROR("Invalid size for the BL3-0 image. Must be a multiple of "
"4 bytes and not zero (current size = 0x%x)\n",
image_size);
return -1;
}
/* Extract the checksum from the image */
checksum = *(uint32_t *) image;
image = (char *) image + sizeof(checksum);
image_size -= sizeof(checksum);
mhu_secure_init();
VERBOSE("Send info about the BL3-0 image to be transferred to SCP\n");
/*
* Send information about the SCP firmware image about to be transferred
* to SCP
*/
scp_boot_message_start();
BOM_CMD_HEADER->id = BOOT_CMD_INFO;
cmd_info_payload = BOM_CMD_PAYLOAD;
cmd_info_payload->image_size = image_size;
cmd_info_payload->checksum = checksum;
scp_boot_message_send(sizeof(*cmd_info_payload));
#if CSS_DETECT_PRE_1_7_0_SCP
{
const uint32_t deprecated_scp_nack_cmd = 0x404;
uint32_t mhu_status;
VERBOSE("Detecting SCP version incompatibility\n");
mhu_status = mhu_secure_message_wait();
if (mhu_status == deprecated_scp_nack_cmd) {
ERROR("Detected an incompatible version of the SCP firmware.\n");
ERROR("Only versions from v1.7.0 onwards are supported.\n");
ERROR("Please update the SCP firmware.\n");
return -1;
}
VERBOSE("SCP version looks OK\n");
}
#endif /* CSS_DETECT_PRE_1_7_0_SCP */
response = scp_boot_message_wait(sizeof(response));
scp_boot_message_end();
if (response != 0) {
ERROR("SCP BOOT_CMD_INFO returned error %u\n", response);
return -1;
}
VERBOSE("Transferring BL3-0 image to SCP\n");
/* Transfer BL3-0 image to SCP */
scp_boot_message_start();
BOM_CMD_HEADER->id = BOOT_CMD_DATA;
cmd_data_payload = BOM_CMD_PAYLOAD;
cmd_data_payload->offset = (uintptr_t) image - MHU_SECURE_BASE;
cmd_data_payload->block_size = image_size;
scp_boot_message_send(sizeof(*cmd_data_payload));
response = scp_boot_message_wait(sizeof(response));
scp_boot_message_end();
if (response != 0) {
ERROR("SCP BOOT_CMD_DATA returned error %u\n", response);
return -1;
}
VERBOSE("Waiting for SCP to signal it is ready to go on\n");
/* Wait for SCP to signal it's ready */
return scpi_wait_ready();
}