This patch is to fix Errata #841119 and #826419 failed apply in linux
because of SMMU_CBn_ACTLR register can't be modified in non-secure
states.
Signed-off-by: Howard Lu <howard.lu@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I2b23e7c8baa809f385917eb45b10ec6b26a9ada8
Compiling with -Wimplicit-fallthrough=3 (enabled by -Wextra) produces
many warnings about fallthrough comments either missing or being wrong.
Unify the comments so we comply with -Wextra.
Note that Coverity recommends against using the __attribute__ directive.
Also, zlib does not build with a higher value of -Wimplicit-fallthrough.
Finally, compilers strip comments before expanding macros. As such,
checkpatch's fallthrough annotation (or higher levels of the flag) isn't
really possible.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I060cf4f8dc04c02cbb45cf4ceb69569a8369ccee
Changed the size of OCRAM reserved by ROM code and increased the
size of CSF header.
Earlier, 4 keys image was exceeding boundaries and landing in
OCRAM location reserved for ROM usage.
Signed-off by:- Kshitiz Varshney <kshitiz.varshney@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I628ff7464fe0184d0553a7962d592aafd42e8137
Remove errata a008850 from ls1028a and ls1088a, it should
only be feasible for ls1020a, ls1043a and ls1046a.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I8ab84158a2ed6bb15b16d10f8796c3e86fc560a5
DDR4 Chip is EOL during redesign of ls1043ardb pd version. The replacement from MT is MT40A1G8SA-062E:R.
New ddr configure is compatible with both pd and old version of ls1043ardb.
Signed-off-by: Chunlei Xu <chunlei.xu@nxp.com>
Change-Id: I714c091a2cf15046438d0723fb55a4410c386ef4
- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert.h. Removing
"platform_def.h" from assert.h and adding "common/debug.h"
where the macros are used.
- Removing hack for fixing PLAT_LOG_LEVEL_ASSERT to 40.
Instead removing assert with expression, as this
does not provide additional information.
Signed-off-by: Claus Pedersen <claustbp@google.com>
Change-Id: Icc201ea7b63c1277e423c1cfd13fd6816c2bc568
Currently Tf-A uses whatever openssl binary is on the system to sign
images. However if OPENSSL_DIR is specified in the build flags this can
lead to linking issues as the system binary can end up being linked
against shared libraries provided in OPENSSL_DIR/lib if both binaries
(the system's and the on in OPENSSL_DIR/bin) are the same version.
This patch ensures that the binary used is always the one given by
OPENSSL_DIR to avoid those link issues.
Signed-off-by: Salome Thirot <salome.thirot@arm.com>
Change-Id: Ib534e06ebc8482e4391e376d3791a87968de4a99
Add QDS support for ls1088a.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6c7a7a23fa6b9ba01c011a7e6237f8063d45e261
The LS1088A reference design board provides a comprehensive platform
that enables design and evaluation of the product (LS1088A processor).
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If4ca24fcee7a4c2c514303853955f1b00298c0e5
LS1088A is a cost-effective, powerefficient, and highly integrated
SoC device featuring eight extremely power-efficient 64-bit ARM
Cortex-A53 cores with ECC-protected L1 and L2 cache memories for
high reliability, running up to 1.6 GHz.
This patch is to add ls1088a SoC support in TF-A.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Id9ebcdad1beab07ea81a41955edd4f471d6cf090
Refine the code to be compatible with new CCN504 which is used
by ls2088a.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I2e2b3bbb9392862b04bf8a89dfb9575bf4be974a
Support CHASSIS 3.0(such as SoC LS1088A).
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I60843bc4d604f0de1d91c6d3ad5eb4921cdcc91a
Add base address definiton for Chassis 3 platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6041b93c9e9bb49af60743bd277ac7cc6f1b9da8
Set the receiver gain to max value to recover
cold temp marginality issue for phy-gen2
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If639fa3ed404cf6e1b8abcc2b7137db1fdd0b2c2
Fix build issue of mmap_add_ddr_region_dynamically():
ls_bl2_el3_setup.c:(.text.bl2_plat_preload_setup+0x28): undefined
reference to mmap_add_ddr_region_dynamically
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I74a8b4c2337fc0646d6acb16ce61755c5efbdf38
Update WA for Errata A-050426 as Commands for
PEX (PEX1..PEX6) , lnx1_e1000#0, lnx1_xfi and
lnx2_xfi has been moved to PBI phase.
This patch requires RCW to include PBI commands
to write commands in BIST mode for PEX, lnx1_e1000,
lnx1_xfi and lnx2_xfi IP blocks.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Change-Id: I27c2b055c82c0b58df83449f9082bfbfdeb65115
The erratum A-009810 should not be applied to LX2, the impaction is
that it can cause system reboot when linux tried to power down, so remove
it.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5e24229cf8512eff28b315ebcdf18de555c40c74
ls1046aqds board is full function board to evaluate ls1046a platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id1befe37a25f7c379e76791538348fd03bba78f7
The LS1046A Freeway board (FRWY) is a high-performance computing,
evaluation, and development platform that supports the LS1046A
architecture processor capable of support more than 32,000 CoreMark
performance. The FRWY-LS1046A board supports the LS1046A processor,
onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E
interfaces for Wi-Fi, FRWY-LS1046A-AC includes the Wi-Fi card.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I9a9680689e6f17bf4cc76fd5d1883eed6ace5149
The LS1046A reference design board (RDB) is a high-performance
computing, evaluation, and development platform that supports
the Layerscape LS1046A architecture processor.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib7a01b309e0b0acc7f38e22b138e9e181dff244a
The LS1046A is a cost-effective, power-efficient, and highly
integrated system-on-chip (SoC) design that extends the reach
of the NXP value-performance line of QorIQ communications
processors. Featuring power-efficient 64-bit Arm Cortex A72
cores with ECC-protected L1 and L2 cache memories for high
reliability, running up to 1.8 GHz.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Change-Id: I208d9bf1702410463c2b2630d31d0cd4eb7e8837
The LS1043A reference design board (RDB) is a computing, evaluation,
and development platform that supports the Layerscape LS1043A
architecture processor.
The old implementation in tf-a (plat/layerscape/board/ls1043/) is removed,
and this patch is adding it back, it is using the unified software
component and architecture with all the other Layerscape platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Change-Id: I83eee2f9254267b148960b05e25b6c9ba86cf07e
The LS1043A processor was NXP's first quad-core, 64-bit Arm based
processor for embedded networking.
The old implementation in tf-a (plat/layerscape/board/ls1043/) is removed,
and this patch is adding it back, it is using the unified software
component and architecture with all the other Layerscape platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Change-Id: Ia3877530fae6479bd4a33bbe46b0c0d28ab43160
Increate SoC name length as it is not enough for some
SoC personalities.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I2142b4b5162dd3c9ab3afefcdc859063836d8bcc
Added some RCPM2 register offset definiton for register: IPSTPCR,
IPSTPACKR and POWMGTDCR, also added OVRD bit definiton of register
POWMGTDCR.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I301bc1401e053c2089b5eb3672c6e649c805a2ab
total_dram_size should be signed value because it is equal to return
value of init_ddr(), so if it is lower or equal zero, report
error as DDR is not initialized correctly.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Idbc40da103f60f10cb18c5306e97b764c1a9d372
Add helper function to disable the load-store prefetch.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I36d7be37e0b800ab1e5842a56cfd04d779338868
Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width types for such change.
Change-Id: I0bca594687a996fde0a9702d7a383055b99f10a1
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
In order to enable OCRAM ECC, it need to be initialized
with 64-bit writes and then a write performed to address
0x0010_0534 with the value 0x0000_0008.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Id7d4f5df65ca52f24e9251c08a75ad2006451b95
Fix the error that no "gpio_init_data" is defined when
build with "FUSE_PROG=1".
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I0ba8005725fe33c6d8e68b4d52539f5d5d749f1a
The LS1028A reference design board (RDB) is a computing,
evaluation, and development platform that supports industrial
IoT applications, human machine interface solutions, and
industrial networking.
It supports the following features:
1. Layerscape LS1028A dual-core processor based on Cortex-A72
at 1.3 GHz.
2. 4 GB DDR4 SDRAM w/ECC
3. Support Ethernet:
1) x1 RJ45 connector for 1Gbps Ethernet support w/TSN, 1588
2) x4 RJ45 connector for 1Gbps Ethernet switch support w/TSN,
1588 (QSGMII)
3. With Basic Peripherals and Interconnect
2x M.2 Type E slots with PCIe Gen 3.0 x1
1x M.2 Type B slot with SATA 3.0 (resistor mux with 1 Type E slot)
1x Type A USB 3.0 super-speed port
1x Type C USB 3.0 super-speed port
1x DisplayPort interface
2x DB9 RS232 serial ports
2x DB9 CAN interfaces
1x 3.5 mm audio out
2x MikroBUS™ sockets
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Change-Id: I48ee254a488ae4af227641da3875a1e9a63a720c
The QorIQ LS1028A processor integrates two 64-bit ARM Cortex-A72
cores with a GPU and LCD controller, as well as a TSNenabled
Ethernet port and a TSN-enabled switch with four external ports.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Change-Id: I9f65c6af5db7e20702828cd208290c1b43a54941
Define default SD buffer address and size in DRAM.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5872d95b0c1114e05f0e145756e9a6ef39b2fd9a
